Jump to content

Construction of the Tank of Tanks


1000071831.gif.7d45abe2b87b154469feb4eb047f8dc9.gif

 

And so it begins.

 

Got the cork on sale... got all the pieces. I just need too... grab my glue and put it together.

go shopping and buy more glue.:facepalm:

 

1000078676.thumb.jpg.e09f33c78fab40cc06fefed769e5c1c6.jpg

 

 

 

Edited by Lathe Biosas
... it's always the little things you forget about.

  • Love 1
  • Support 1

15 Comments


Recommended Comments

Lathe Biosas

Posted

Quote

Strike the first rune upon the engine's casing employing the chosen wrench. Its tip should be anointed with the oil of engineering using the proper incantation when the auspices are correct. Strike the second rune upon the engine's casing employing the arc-tip of the power-driver. If the second rune is not good, a third rune may be struck in like manner to the first. This is done according to the true ritual laid down by Scotti the Enginseer. A libation should be offered. If this sequence is properly observed the engines may be brought to full activation by depressing the large panel marked "ON".

 

Construction and priming is proceeding on schedule...

1000078755.jpg

  • Like 1
  • Love 1
kabaakaba

Posted

one more little step!

Lathe Biosas

Posted

Amaranthine Verses 78.12

 

No task that is easy is ever worthwhile. 

 

1000078758.thumb.jpg.a5f35e19a465d7d362bd077ff25cb678.jpg

  • Like 1
  • Love 1
Lathe Biosas

Posted (edited)

Now... I primed it grey seer. Just a light coat.

 

1000078851.thumb.jpg.676879e06f265370028ece02f15bc765.jpg

 

What color should I paint my tracked ICBM?

Edited by Lathe Biosas
Lathe Biosas

Posted

Ugh. It's getting there.

 

I have the urge to douse it with nuln oil or reikland fleshshade.1000079431.thumb.jpg.bdaa25e3f78dde22dcb9cadd2bf41c3e.jpg

  • Like 1
  • Love 1
Mr Garibaldi

Posted

Looking good, is this epic or 3d print?

 

Good choice of paint colour, it reminds me of the WD130-140ish vehicle releases along with the original vehicle paint set. I seem to remember that the patch at the front you have left white was for the squad/unit markings? Will you be adding any camo markings?

  • Like 1
W.A.Rorie

Posted

11 hours ago, Lathe Biosas said:

Ugh. It's getting there.

 

I have the urge to douse it with nuln oil or reikland fleshshade.1000079431.thumb.jpg.bdaa25e3f78dde22dcb9cadd2bf41c3e.jpg

 

a wash might be nice but I would do a recess shade, highlight, weather/ damage then wash it 

3 hours ago, Mr Garibaldi said:

Looking good, is this epic or 3d print?

 

Good choice of paint colour, it reminds me of the WD130-140ish vehicle releases along with the original vehicle paint set. I seem to remember that the patch at the front you have left white was for the squad/unit markings? Will you be adding any camo markings?

 

I believe it was a 3d print of an Out of Print Forgeworld Cyclops demolition vehicle 

  • Like 1
Lathe Biosas

Posted

She's a 3d print, but a good one.

 

I'm a terrible painter who gets frustrated easily when it comes to what I believe the model should look like, and what I can actually achieve.

Night Lords Pete

Posted

1 hour ago, Lathe Biosas said:

She's a 3d print, but a good one.

 

I'm a terrible painter who gets frustrated easily when it comes to what I believe the model should look like, and what I can actually achieve.

I’m not a good painter either so I know how you feel.

 

Looks like you’re halfway there though!

 

With soemthing like this I’d do something like dark grey dry brush on the tracks and any other base colours I want, black wash, bit of a dry brush for any highlight colours or metallic erosion showing through, and throw on some weathering powder. That’s about all my skill level is up to, but usually gives a reasonable atmosphere.

 

Anyway, all of what I just wrote should probably be ignored…

 

I’m sure you’ll get it looking cracking!

  • Thanks 1
Lathe Biosas

Posted (edited)

Working on the treads next. And then a bit of spot color.

1000079619.jpg

1000079617.jpg

1000079622.jpg

 

How should I paint the Aquila?

Edited by Lathe Biosas
  • Love 3
Mr Garibaldi

Posted

That is looking mighty fine mate. What wash did you go for? My gut says aquila in gold but that might prove tricky to shade and not flood things at this scale.

Have you ever tried the pencil highlight method on your metals?

Lathe Biosas

Posted

Pencil highlight? 

 

As for the wash, I just used too much of this (which is what I used a long time ago on Russian Flames of War Tanks): 1000079659.thumb.jpg.bc2559cdd8b40c79a3bc6d1dca7e6627.jpg

  • Like 1
Mr Garibaldi

Posted

Yeah I know it sounds nuts but if you get a scalpel or exacto and slice the wood away from the lead in a pencil to give you plenty of exposed lead, rub that exposed edge along a hard edge and you get an instant metallic highlight, go gentle as you don't want to be peeling the paint off. Just remember it is not permanent like paint so only do at the finishing up stage. Also try it on something junk you have kicking about with paint on first. I like using it on tank hatches and hard angle armour edges for display stuff, its perfect for bringing back the metallic sheen on tank treads after getting all the dirt and grime down in the links etc.

 

Ahh nice love me a bit of Tamiya goodness! Does this smell fantastic too? Only problem with the Tamiya paint range is the need for X-20A thinner to dilute stuff

  • Thanks 1
Lathe Biosas

Posted

I like to use it in enclosed spaces. That way the fumes keep me from being too worried about my paint job. :teehee:

 

☆☆☆

 

Im under the firm belief that all Imperial vehicles need to be dirty, abused and oil stained.

 

This paint scheme is a test of what I was planning to paint my Imperial Knights. Except I was going to prime one panel in Leadbelcher and then use Kroxigor Scales over the Leadbelcher as an accent. And then dirty up the entire knight.

  • Haha 1
Lathe Biosas

Posted

Went with a white Aquila... and then dirtied it up. There is nothing clean in my Imperial Guard (except for that bright yellow spot on the top of the tank:unsure:).

 

1000079686.thumb.jpg.7b7cb762a02ea0f5b2bbd4839305053e.jpg

 

  • Like 1
  • Love 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.