modeling battle damage (bolter impacts)

[chosonofchaos]

this is my tutorial on battle damage for chaos or space marines

if you use this please practice first on an unwanted model or learn the hard way like me

you will need a sharp pointed blade (i use a scalple) and a 1.4mm drillbit or screwdriver

i will show you using a shoulder pad

start with your cleaned model (do each piece separatly before assembling)

first make an indent by twisting the point of the blade on the same spot (should be about 1.4mm wide)

next, drill a hole about 1 and a half mm deep or as deep as you want(drill all the way through for shoulder pads)

finaly use the blade at a 45 degree angle around the hole in a circle

here are some pictures of my chaos aspiring champion with battle damage (sorry for blurry pictures)

thanks for reading goodluck :D

[Harald Fairmane]

nice