Vaaish Posted April 16, 2011 Author Share Posted April 16, 2011 Thanks! Today I finished up painting the spotter plane for the landing pad and gave it a coat of varnish. It'll need to cure for a few days before I can leave it permanently attached to the chassis so I don't pull off paint, but in the mean time here's a shot of the last ordinatus and a group shot of them. Next up macharius and more titans! A careful comparison will see the adjusted windows on the quake cannon minorus. I aslo added a yellow and black striped cable to break up the monotony on the back but it's not visible in this shot. http://www.twolandscreative.com/wip/epic/minorus01.jpg http://www.twolandscreative.com/wip/epic/minorusgroup.jpg for those interested, here's a shot of the spotter plane before getting a coat of paint: http://www.twolandscreative.com/wip/epic/minplane.jpg Link to comment https://bolterandchainsword.com/topic/193057-vaaishs-epic-thread/page/3/#findComment-2726929 Share on other sites More sharing options...
Vaaish Posted April 16, 2011 Author Share Posted April 16, 2011 Thanks! Today I finished up painting the spotter plane for the landing pad and gave it a coat of varnish. It'll need to cure for a few days before I can leave it permanently attached to the chassis so I don't pull off paint, but in the mean time here's a shot of the last ordinatus and a group shot of them. Next up macharius and more titans! A careful comparison will see the adjusted windows on the quake cannon minorus. I aslo added a yellow and black striped cable to break up the monotony on the back but it's not visible in this shot. http://www.twolandscreative.com/wip/epic/minorus01.jpg http://www.twolandscreative.com/wip/epic/minorusgroup.jpg for those interested, here's a shot of the spotter plane before getting a coat of paint: http://www.twolandscreative.com/wip/epic/minplane.jpg Link to comment https://bolterandchainsword.com/topic/193057-vaaishs-epic-thread/page/3/#findComment-2726930 Share on other sites More sharing options...
Vaaish Posted June 12, 2011 Author Share Posted June 12, 2011 Hey look, I've got more yellow things to post here! I've long needed a couple more devastator detachments for my own marines and I decided to try out some other techniques rather than my usual weathering with these guys. Playing with higher contrast, shading and some basing. Yellow is still a hard color to take a pic of, but this is mostly accurate. I'm pretty happy with the results too. Now on to some test minis for Blood ravens. Hope you enjoy them! http://www.twolandscreative.com/wip/epic/IFDevastators08.jpg Link to comment https://bolterandchainsword.com/topic/193057-vaaishs-epic-thread/page/3/#findComment-2789512 Share on other sites More sharing options...
tauyippiejoy Posted June 12, 2011 Share Posted June 12, 2011 This is just madness.. I find that yellow is a pain to paint on regular model and then you go and paint some awesome yellow on some incredible small, epic, models. On one earlier post someone corrected you and said that this tread and all the models you've shown was "epic" in every sense of the word. I'm happy to agree with him! Love your work! Link to comment https://bolterandchainsword.com/topic/193057-vaaishs-epic-thread/page/3/#findComment-2789746 Share on other sites More sharing options...
cathar the great Posted June 12, 2011 Share Posted June 12, 2011 Yeah, you can change that thread title, this is truly epic in every way. The scratch built spotter plane is genius, and the amount of detail you cram into these tiny models is nothing but mind-blowing. Makes me want to build a small (hur hur) Epic army myself. Is it very pricey to get into? Link to comment https://bolterandchainsword.com/topic/193057-vaaishs-epic-thread/page/3/#findComment-2789761 Share on other sites More sharing options...
Vaaish Posted June 12, 2011 Author Share Posted June 12, 2011 Thanks! I nearly forgot to add a couple more things. After posting the pics of the spotter plane, I decided the intakes needed a bit more definition so I added some cowling to them. I also did up some scratch built epic warhounds for a commission and a couple of warlords for myself. http://www.twolandscreative.com/wip/epic/min01update.jpg http://www.twolandscreative.com/wip/epic/lwarlord01.jpg http://www.twolandscreative.com/wip/epic/lwarlord02.jpg http://www.twolandscreative.com/wip/epic/ecwarhound03.jpg http://www.twolandscreative.com/wip/epic/ecwarhound01.jpg As far as epic goes, it's far less expensive than 40k. This is especially true if you go with marines where you can get I think 2x tactical, 2x assault, and 2x dev out of a box. After that you need a couple of thunderhawks and a pack of terminators as well as a pack of rhinos and hunters/ww. That comes to around 150 USD and gives you something like this: Thunderhawk 200 +Dev + Librarian 300 +Assault 175 Thunderhawk 200 +Dev + Librarian 300 +Assault + Chaplain 225 Terminators + captain 375 Terminators + chaplain 375 Tactical + hunter + supreme commander 475 (includes 3x rhinos) Tactical + Hunter 375 (includes 3x rhino) 3000 You can save money on ebay getting older versions of the troops and rhinos if you want. Other forces are more expensive since there are more metal models needed for transport or units. As far as the commanders go, you can either get the pack from GW or just paint things to look the part. I did that for my terminators. Link to comment https://bolterandchainsword.com/topic/193057-vaaishs-epic-thread/page/3/#findComment-2789981 Share on other sites More sharing options...
Brother_Fatiswon Posted June 12, 2011 Share Posted June 12, 2011 your commissioned warhound is jaw dropping! your thread makes me want to switch gears from 28mm to 10mm but as most ppl know, with no one in my LGS to play against i would have to collect two forces and that makes it beyond reason but to you sIr Well done Very fine work! BF Link to comment https://bolterandchainsword.com/topic/193057-vaaishs-epic-thread/page/3/#findComment-2790011 Share on other sites More sharing options...
Hemal Posted June 13, 2011 Share Posted June 13, 2011 I love your epic stuff, inspiring me to complete my own!! Link to comment https://bolterandchainsword.com/topic/193057-vaaishs-epic-thread/page/3/#findComment-2790873 Share on other sites More sharing options...
Vaaish Posted June 17, 2011 Author Share Posted June 17, 2011 Somehow double posted.... Link to comment https://bolterandchainsword.com/topic/193057-vaaishs-epic-thread/page/3/#findComment-2794988 Share on other sites More sharing options...
Vaaish Posted June 17, 2011 Author Share Posted June 17, 2011 Thanks! I had planned on having that sneak peak up last night but a power outage from a storm conspired against me and I got zero painting done past 6:45. Anyway, that has now been fixed and here's the finished test razorback for the Blood Ravens... decals and all. I'm not 100% happy with the red though. I think that starting on a black base ended up with too dark of an overall appearance. I'm thinking that white and then using either dark flesh with a blue wash or scab red and the same technique I did here would work better and give a nicer mini. I have, however, vastly improved my mudding technique on these :woot: Enjoy. http://www.twolandscreative.com/wip/epic/brrazortest.jpg Link to comment https://bolterandchainsword.com/topic/193057-vaaishs-epic-thread/page/3/#findComment-2794989 Share on other sites More sharing options...
Octavulg Posted June 17, 2011 Share Posted June 17, 2011 That feels more Flesh Tearers or even Soul Drinkers than Blood Ravens. It's very purple. Link to comment https://bolterandchainsword.com/topic/193057-vaaishs-epic-thread/page/3/#findComment-2794998 Share on other sites More sharing options...
Vaaish Posted June 17, 2011 Author Share Posted June 17, 2011 I think that the scab red being slightly purple got intensified by putting it on a black undercoat. It is a test mini though and based on some of the models the client had already painted using the scab red as a base. I think that the next one will be on a white undercoat which should help but I'm not sure I can get a less purple red without switching to dark flesh as a base. I might be able to tint it a bit with a blood red wash or two. Link to comment https://bolterandchainsword.com/topic/193057-vaaishs-epic-thread/page/3/#findComment-2795010 Share on other sites More sharing options...
MagicMan Posted June 17, 2011 Share Posted June 17, 2011 I dont understand how you paint so much detail on something so small. Do you have a shrinking machine, or something? Also loving those Titans. They look good enough for me to want to try out 10mm gaming. Link to comment https://bolterandchainsword.com/topic/193057-vaaishs-epic-thread/page/3/#findComment-2795260 Share on other sites More sharing options...
MagicMan Posted June 17, 2011 Share Posted June 17, 2011 How tall is that Warlord? Was just having a gander at the prices, but theres no sort of scale comparison. Link to comment https://bolterandchainsword.com/topic/193057-vaaishs-epic-thread/page/3/#findComment-2795262 Share on other sites More sharing options...
Octavulg Posted June 17, 2011 Share Posted June 17, 2011 It's 6mm gaming. :P I'd recommend buying second hand or from a discount store if you want to give a Warlord a shot. I believe they're about 5 inches tall. Link to comment https://bolterandchainsword.com/topic/193057-vaaishs-epic-thread/page/3/#findComment-2795396 Share on other sites More sharing options...
Vaaish Posted June 17, 2011 Author Share Posted June 17, 2011 Thanks! Nah, no shrinking machines around here though! :P the warlord is a probably a little taller than a 40k dread. Link to comment https://bolterandchainsword.com/topic/193057-vaaishs-epic-thread/page/3/#findComment-2795423 Share on other sites More sharing options...
ItCameFrom1994 Posted June 21, 2011 Share Posted June 21, 2011 Much respect for your steady hands. Link to comment https://bolterandchainsword.com/topic/193057-vaaishs-epic-thread/page/3/#findComment-2798707 Share on other sites More sharing options...
Vaaish Posted June 21, 2011 Author Share Posted June 21, 2011 Thanks! Ok, and now for the second test. This one was painted with the exact same formula as the previous with the only difference being that I primed this one in white. I think this is a much better looking red for the Blood ravens than the purplish that came out of the black primer. I'm really not a fan of the premoulded bases though. They are hard to get the model glued in place right and still look good. The conversion here isn't my own. http://www.twolandscreative.com/wip/epic/brdamocles.jpg Link to comment https://bolterandchainsword.com/topic/193057-vaaishs-epic-thread/page/3/#findComment-2798728 Share on other sites More sharing options...
ItCameFrom1994 Posted June 21, 2011 Share Posted June 21, 2011 Gosh darn it dude. I love Blood Ravens. Link to comment https://bolterandchainsword.com/topic/193057-vaaishs-epic-thread/page/3/#findComment-2798954 Share on other sites More sharing options...
Mortarion Posted June 21, 2011 Share Posted June 21, 2011 That looks more like Blood ravens. And the painting is awesome as usual! It makes me want to paint Epic again. Link to comment https://bolterandchainsword.com/topic/193057-vaaishs-epic-thread/page/3/#findComment-2799304 Share on other sites More sharing options...
Rob_Loken Posted June 21, 2011 Share Posted June 21, 2011 Nice work. I've never painted Epic stuff but when I see it painted like this, it makes me wanna give it a go for sure. That is a big old radar though. Link to comment https://bolterandchainsword.com/topic/193057-vaaishs-epic-thread/page/3/#findComment-2799357 Share on other sites More sharing options...
Octavulg Posted June 21, 2011 Share Posted June 21, 2011 All the better to see the heretics with. Link to comment https://bolterandchainsword.com/topic/193057-vaaishs-epic-thread/page/3/#findComment-2799431 Share on other sites More sharing options...
Vaaish Posted June 21, 2011 Author Share Posted June 21, 2011 ...because nothing says "I see what you did thar" like a frickin' huge dish on top your Rhino. :) Link to comment https://bolterandchainsword.com/topic/193057-vaaishs-epic-thread/page/3/#findComment-2799438 Share on other sites More sharing options...
Vaaish Posted July 4, 2011 Author Share Posted July 4, 2011 Ok, update time and we have razorbacks :) This is the first production set using the new methods. I think that they turned out fairly close in painting standard to the test damocles. There is a bit of contrast issue here along with a slightly different red because these were originally primed black and I went back over them with a light coat of white primer so they wouldn't end up the darker purple color of the original test. Next up I'll be doing three of the battletech mechs before the first set of blood ravens land raiders and then moving on to either more mechs or my 40k tech marine. With any luck I should have him, his servitors and a good bit of work on my last dread conversion done before the end of the year. http://www.twolandscreative.com/wip/epic/brrazorback01.jpg Link to comment https://bolterandchainsword.com/topic/193057-vaaishs-epic-thread/page/3/#findComment-2810064 Share on other sites More sharing options...
Vaaish Posted August 7, 2011 Author Share Posted August 7, 2011 After a bit of a break for some battletech stuff (more will be forthcoming in a few weeks) I've finished up the fist of the Blood Raven's land raiders. This batch just happened to be the helios so giant rocket launcher love is a given. :D I'm not too sure how the scheme will translate into the regular raiders since there won't be the large missile rack to break up the reds so this might change a bit as more roll off the production line. Right now the next thing on the list once it cools down is another batch of land raiders. http://www.twolandscreative.com/wip/epic/brhelios01.jpg Link to comment https://bolterandchainsword.com/topic/193057-vaaishs-epic-thread/page/3/#findComment-2840810 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.