IanSturrock Posted March 22, 2010 Share Posted March 22, 2010 I have been almost 100% distracted by assembling my new Tyranid army (I couldn't help it! I blame Space Hulk!), so have been very lax on my painting challenge work. This means I have not much more than 1 week to paint 5 Termies, 1 Predator, and 1 Venerable Dread... uh-oh. Here's the preliminary pics: Venerable Dreadnought, customised & converted from a standard Dread (with added decorative nuts & bolts, Green Stuff & modelling rope banner, plasticard crenellations, decorative archways from 40K buildings, etc.). The base is Space Hulk themed. The whole thing has been basecoated bone white & given a 2nd spray of white from above to give it some initial highlights, but I've yet to start the paint job proper. http://photos-a.ak.fbcdn.net/hphotos-ak-snc3/hs448.snc3/25691_374955316866_596296866_4278696_4186457_n.jpg Next, the predator. Not only have I not even started on the painting on this one... it already has a mediocre paint job. Fortunately it's a *thin* mediocre paint job, for once, unlike most of the 2nd-hand minis I buy from eBay. I've ground away the broken remains of the old main turret gun & glued a new plastic Autocannon in place, as well as removing the old sponson guns (one heavy flamer and one heavy bolter... confused) & replacing them with some old-style lascannons from a Razorback. The plan with this one is to basecoat it lightly in silver, right over the top of the existing paint job, then give it a coat of Dark Angels green, then scrape some of the green off to reveal silver underneath. Watch this space! http://photos-g.ak.fbcdn.net/hphotos-ak-snc3/hs448.snc3/25691_374956511866_596296866_4278706_1317634_n.jpg Finally, 5 Deathwing Terminators, converted from Blood Angel terminators from the new Space Hulk game. I've removed the Blood Angel iconography (there was rather a lot of it...) and added a load of Dark Angels bling instead. The bases are magnetised, so I can have either small Space Hulk bases or 40mm terminator bases. Eventually these bases will be Space Hulk themed too. 4 of these minis have been basecoated, and the other is still awaiting his first lick of paint. http://photos-a.ak.fbcdn.net/hphotos-ak-ash1/hs468.ash1/25691_374956521866_596296866_4278707_26257_n.jpg Link to comment https://bolterandchainsword.com/topic/195595-ian-sturrocks-painting-challenge-wip-thread/ Share on other sites More sharing options...
Zazaodh Posted March 23, 2010 Share Posted March 23, 2010 Looking good, especially liking the dred. It kind of reminds me of an Imperator titan - which is never a bad thing! How long did it take you to 'fix' the terminators and put on the DA iconography? Link to comment https://bolterandchainsword.com/topic/195595-ian-sturrocks-painting-challenge-wip-thread/#findComment-2330003 Share on other sites More sharing options...
IanSturrock Posted March 24, 2010 Author Share Posted March 24, 2010 Thanks for the kind words on the Dread -- I just hope my paint job does it justice! Took about 2 hours to get rid of *most* of the BA stuff off the 11 terminators, and another hour or so to add most of the basic bling, but then several hours more of spotting other bits & pieces that needed sorting, adding green stuff to fill gaps, etc... maybe 6-7 hours in total? Rather rough update -- the Predator is almost finished, with a light coat of silver spraypaint, then 3 coats of fairly well thinned Dark Angels Green, then 2 washes with some home-mixed dark green acrylic wash (matt medium, flow aid, water, emerald green ink, black ink), then rubbing off some of the green on the edges to reveal silver. Dread has had a couple of washes of a similar home-made wash (but with flesh tone & a bit of burnt umber instead of the green & black) over the bone bits, & black undercoat over most of the stuff that's not going to be bone. Not that you can probably see most of the detail... http://photos-d.ak.fbcdn.net/hphotos-ak-snc3/hs448.snc3/25691_375645371866_596296866_4291965_6003803_n.jpg Oh, and the basic wash recipes can be found here: http://www.dakkadakka.com/dakkaforum/posts/list/261541.page Link to comment https://bolterandchainsword.com/topic/195595-ian-sturrocks-painting-challenge-wip-thread/#findComment-2332713 Share on other sites More sharing options...
IanSturrock Posted March 26, 2010 Author Share Posted March 26, 2010 Predator's almost finished. I added some 2mm wire exhausts, to replace the long-broken-off plastic ones. Guns are pretty much done, as is the body. I need to finish off the headlights, and maybe add a DA symbol or two, and paint the new exhausts, and add dust and mud -- then it's done! http://photos-c.ak.fbcdn.net/hphotos-ak-snc3/hs455.snc3/26021_375916931866_596296866_4297388_1794806_n.jpg The dread is getting there... still got a stack of stuff to do on this, though. http://photos-e.ak.fbcdn.net/hphotos-ak-ash1/hs475.ash1/26021_375916936866_596296866_4297389_8290385_n.jpg Link to comment https://bolterandchainsword.com/topic/195595-ian-sturrocks-painting-challenge-wip-thread/#findComment-2334153 Share on other sites More sharing options...
Zazaodh Posted March 26, 2010 Share Posted March 26, 2010 Looks to be coming along nicely! Thanks for the DakkaDakka link, seems pretty useful for anyone who wants more than just the standard washes. Link to comment https://bolterandchainsword.com/topic/195595-ian-sturrocks-painting-challenge-wip-thread/#findComment-2334999 Share on other sites More sharing options...
Isiah Posted March 27, 2010 Share Posted March 27, 2010 IanSturrock that dready model looks amazing. I like the large banner complete with bullet holes. So did you convert it yourself or is it an ebay find like the Pred? Cheers I Link to comment https://bolterandchainsword.com/topic/195595-ian-sturrocks-painting-challenge-wip-thread/#findComment-2336286 Share on other sites More sharing options...
IanSturrock Posted March 28, 2010 Author Share Posted March 28, 2010 Thanks, Isiah. The dread is all my own work. :) Most of it is from the standard Dreadnought kit, but there's a load of other bits from stuff like terrain, TH/SS termie sprues, DA upgrade sprues, Ravenwing sprues, etc., as well as the various modelling materials. Got him almost finished now: http://photos-d.ak.fbcdn.net/hphotos-ak-ash1/hs475.ash1/26021_376543016866_596296866_4311460_6518943_n.jpg http://photos-f.ak.fbcdn.net/hphotos-ak-snc3/hs475.snc3/26021_376543021866_596296866_4311461_4487303_n.jpg http://photos-h.ak.fbcdn.net/hphotos-ak-snc3/hs455.snc3/26021_376543026866_596296866_4311462_4290464_n.jpg I've named him Cassiel, who is traditionally the Archangel of Saturn... and so associated with slowness, time, death, hell, & eternity, all very appropriate for a Deathwing dread. :) I have to finish the banner off (it's had another coat of red since these pics were taken, so that's looking a bit more even, but I need to add a freehand pic onto the red, next), and do some more washes & highlights here & there, but it's pretty much finished, really. Oh, and the base needs some dust -- he's wandering round a thousand-year-old Space Hulk, after all! Incidentally, the scroll on the Storm Shield that's part of his DCCW reads "I.W.S.Y.S" -- I Will Save Your Souls. The subtext being, By Sending You To Meet Your Maker. The Predator, Fulmen, is almost finished, too, but isn't photographable right now as it's covered in turps from the dust-adding stage. Fulmen is either Latin for "Thunderbolt" or for "My Other Predator Is Magnetised, So It's Not Stuck With Lascannon Sponsons" -- I'm not quite sure which. Link to comment https://bolterandchainsword.com/topic/195595-ian-sturrocks-painting-challenge-wip-thread/#findComment-2337318 Share on other sites More sharing options...
krewl Posted March 31, 2010 Share Posted March 31, 2010 The Predator, Fulmen, is almost finished, too, but isn't photographable right now as it's covered in turps from the dust-adding stage. Fulmen is either Latin for "Thunderbolt" or for "My Other Predator Is Magnetised, So It's Not Stuck With Lascannon Sponsons" -- I'm not quite sure which. I lolled ;) Very nice conversion work on that dread, looking to turn out very well when painted aswell. (Going to make it today, posting the completed work?) Link to comment https://bolterandchainsword.com/topic/195595-ian-sturrocks-painting-challenge-wip-thread/#findComment-2340981 Share on other sites More sharing options...
IanSturrock Posted March 31, 2010 Author Share Posted March 31, 2010 Thanks, krewl. :P I hope to finish 'em today. Dread & Pred are both complete at last. Terminators are... getting there... I'm gonna allow myself till midnight Alaska time. ;) http://photos-b.ak.fbcdn.net/hphotos-ak-snc3/hs455.snc3/26021_377422091866_596296866_4336473_3035545_n.jpg http://photos-e.ak.fbcdn.net/hphotos-ak-snc3/hs455.snc3/26021_377422106866_596296866_4336475_4559577_n.jpg http://photos-g.ak.fbcdn.net/hphotos-ak-ash1/hs475.ash1/26021_377422111866_596296866_4336476_3209218_n.jpg http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs455.snc3/26021_377422116866_596296866_4336477_1151356_n.jpg Link to comment https://bolterandchainsword.com/topic/195595-ian-sturrocks-painting-challenge-wip-thread/#findComment-2341899 Share on other sites More sharing options...
IanSturrock Posted April 1, 2010 Author Share Posted April 1, 2010 Whew! Finished. It's still March. Somewhere. http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs455.snc3/26021_377492876866_596296866_4337797_7480564_n.jpg ...and, yes, the Sergeant does have his hair dyed Dark Angels Green. :) Link to comment https://bolterandchainsword.com/topic/195595-ian-sturrocks-painting-challenge-wip-thread/#findComment-2342335 Share on other sites More sharing options...
IanSturrock Posted January 6, 2011 Author Share Posted January 6, 2011 OK, going to use this same thread for this year's challenge, too! 3 old school rhino chassis. I'll be doing them up so that they can double as razorbacks or whirlwinds. This is them after extensive removal of many layers of horridly painted crud. I have to finish at least 1 for the Librarium Painting Challenge, but will probably at least get the other 2 primed at the same time. http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs800.ash1/169057_479413106866_596296866_6513214_2623219_n.jpg Xmas drop pod! This was a pressie to myself, as it was on offer at half price from the local toy shop. Also needs painting for the Challenge. http://sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs080.snc6/169057_479413111866_596296866_6513215_2942182_n.jpg 5-man Scout Squad, also in need of painting for the Challenge. Old-school gamers may recognise that these minis are originally from the Tyranid Attack boardgame (which I sadly no longer have). The sarge has been given a newer Power Fist, and one of the scouts a shotgun. http://sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs080.snc6/169057_479413116866_596296866_6513216_3852195_n.jpg This one isn't part of the Challenge, but I'm going to aim to finish it by then anyway... 5-man Devastator squad, with a sarge, 2 plasma cannons, and 2 missile launchers. Got to add a bit more DA bling and maybe some Green Stuff robes to these guys. http://sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs060.snc6/169057_479413121866_596296866_6513217_1934931_n.jpg Link to comment https://bolterandchainsword.com/topic/195595-ian-sturrocks-painting-challenge-wip-thread/#findComment-2608817 Share on other sites More sharing options...
Tanhausen Posted January 7, 2011 Share Posted January 7, 2011 I really hope you didnt glue the inside of the pod (the harness)...its hard to access for painting! :P Link to comment https://bolterandchainsword.com/topic/195595-ian-sturrocks-painting-challenge-wip-thread/#findComment-2609421 Share on other sites More sharing options...
IanSturrock Posted January 7, 2011 Author Share Posted January 7, 2011 In my enthusiasm to get it organised for a game, I did! D'oh! Good point. It's the 1st one I've built. Uh, I sense a lot of drybrushing boltgun metal over black undercoat, in the future of that pod's interior. ;) Link to comment https://bolterandchainsword.com/topic/195595-ian-sturrocks-painting-challenge-wip-thread/#findComment-2609460 Share on other sites More sharing options...
stefdeathwing Posted January 7, 2011 Share Posted January 7, 2011 I have been almost 100% distracted by assembling my new Tyranid army (I couldn't help it! I blame Space Hulk!), so have been very lax on my painting challenge work. This means I have not much more than 1 week to paint 5 Termies, 1 Predator, and 1 Venerable Dread... uh-oh. Here's the preliminary pics: Venerable Dreadnought, customised & converted from a standard Dread (with added decorative nuts & bolts, Green Stuff & modelling rope banner, plasticard crenellations, decorative archways from 40K buildings, etc.). The base is Space Hulk themed. The whole thing has been basecoated bone white & given a 2nd spray of white from above to give it some initial highlights, but I've yet to start the paint job proper. http://photos-a.ak.fbcdn.net/hphotos-ak-snc3/hs448.snc3/25691_374955316866_596296866_4278696_4186457_n.jpg Next, the predator. Not only have I not even started on the painting on this one... it already has a mediocre paint job. Fortunately it's a *thin* mediocre paint job, for once, unlike most of the 2nd-hand minis I buy from eBay. I've ground away the broken remains of the old main turret gun & glued a new plastic Autocannon in place, as well as removing the old sponson guns (one heavy flamer and one heavy bolter... confused) & replacing them with some old-style lascannons from a Razorback. The plan with this one is to basecoat it lightly in silver, right over the top of the existing paint job, then give it a coat of Dark Angels green, then scrape some of the green off to reveal silver underneath. Watch this space! http://photos-g.ak.fbcdn.net/hphotos-ak-snc3/hs448.snc3/25691_374956511866_596296866_4278706_1317634_n.jpg Finally, 5 Deathwing Terminators, converted from Blood Angel terminators from the new Space Hulk game. I've removed the Blood Angel iconography (there was rather a lot of it...) and added a load of Dark Angels bling instead. The bases are magnetised, so I can have either small Space Hulk bases or 40mm terminator bases. Eventually these bases will be Space Hulk themed too. 4 of these minis have been basecoated, and the other is still awaiting his first lick of paint. http://photos-a.ak.fbcdn.net/hphotos-ak-ash1/hs468.ash1/25691_374956521866_596296866_4278707_26257_n.jpg nice to see more of the space hulk termies being made into deathwing, just brought some myself. what undercoat did you use on the termies Link to comment https://bolterandchainsword.com/topic/195595-ian-sturrocks-painting-challenge-wip-thread/#findComment-2609777 Share on other sites More sharing options...
IanSturrock Posted January 7, 2011 Author Share Posted January 7, 2011 Stef, it's a basecoat of Army Painter Bone White (equivalent to a GW Bleached Bone), with a second, light spray of GW's Skull White directed just from above, so as to give an idea of how the highlights should look and where they should be. Link to comment https://bolterandchainsword.com/topic/195595-ian-sturrocks-painting-challenge-wip-thread/#findComment-2609794 Share on other sites More sharing options...
IanSturrock Posted January 9, 2011 Author Share Posted January 9, 2011 The 3 rhinos are just about ready for undercoating now. I've replaced the broken exhausts with pieces of 2mm welding wire, cut and bent to shape (nice and easy to work) and replaced some lost rivets, as well as adding a few Dark Angels symbols. The hatches and/or commanders are mostly removable, so as to replace them with Whirlwind parts if need be. The right-hand one has the start of some new detailing on the front, round the viewing slit, but I need to fill some gaps with green stuff before I can paint that one. http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1357.snc4/162908_480835181866_596296866_6538497_8184816_n.jpg Link to comment https://bolterandchainsword.com/topic/195595-ian-sturrocks-painting-challenge-wip-thread/#findComment-2611454 Share on other sites More sharing options...
IanSturrock Posted April 6, 2011 Author Share Posted April 6, 2011 So, I failed this year's challenge! No excuses are entirely valid, really -- I had lots of time -- but here's the main reason: I got a place at the UKGT at Maelstrom Games, via the reserve list (see my post in the Army Lists section), and had to concentrate on fully painting an army for that, less than a week before the Librarium deadline... and the new DA FAQ coming out between my sign-ups pretty much guaranteed that that army was going to be quite different to anything I'd used before! So I spent my hobby time before the tourney, converting up my Deathwing to have a lot more TH/SS, converting my Speeders to be Typhoon/Multimelta, and frantically attempting to get everything painted in time for that event. I just ran out of time to do the Challenge things, none of which, sadly, were needed for the tourney army! In partial compensation for my failure, I offer these two pics of the Deathwing squads I took to the tourney. I was still adding layers of washing and details to these at 1am on the morning of the tournament... Close-up of Belial (twin lightning claws) with his Command Squad, including apothecary and banner: I will get an article written too... might do something on converting Space Hulk termies to Deathwing, since I now have lots of experience in doing that. :cuss Link to comment https://bolterandchainsword.com/topic/195595-ian-sturrocks-painting-challenge-wip-thread/#findComment-2714682 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.