Wolf Brother Osric Posted August 8, 2010 Share Posted August 8, 2010 Hey all, this is my first topic and I wanted to ask a question... what do you all use for the Cyclone Missile Launchers on your Wolf Guard? Recently I was given a Logan model so decided to try my hand at the all wolf guard list and being fairly new (only played about 4 months) I neglected ranged anti-tank weaponry. Since then I have learned my lesson and have been looking around at possible options... my first one is packing a Havoc Launcher from a chaos vehicle sprue as his CML and it looks rather comical but also completely awesome. If I can figure out how to post up a picture I will. So what I want to know is, what do you use? Link to comment https://bolterandchainsword.com/topic/208168-cyclone-missile-launchers/ Share on other sites More sharing options...
hendrik Posted August 8, 2010 Share Posted August 8, 2010 i've made a conversion using the havoc launcher, looks total crap compared to the standard CML. you could also try the missile launcher from the droppod Link to comment https://bolterandchainsword.com/topic/208168-cyclone-missile-launchers/#findComment-2483794 Share on other sites More sharing options...
Valerian Posted August 8, 2010 Share Posted August 8, 2010 Hey all, this is my first topic and I wanted to ask a question... what do you all use for the Cyclone Missile Launchers on your Wolf Guard? Recently I was given a Logan model so decided to try my hand at the all wolf guard list and being fairly new (only played about 4 months) I neglected ranged anti-tank weaponry. Since then I have learned my lesson and have been looking around at possible options... my first one is packing a Havoc Launcher from a chaos vehicle sprue as his CML and it looks rather comical but also completely awesome. If I can figure out how to post up a picture I will. So what I want to know is, what do you use? Hmmm, well, you could always just use a Cyclone Missile Launcher. V Link to comment https://bolterandchainsword.com/topic/208168-cyclone-missile-launchers/#findComment-2483797 Share on other sites More sharing options...
Hfran Morkai Posted August 8, 2010 Share Posted August 8, 2010 I mix and match Tactical Terminator bits, Chaos Terminators and Space Wolf Terminators to make mine (Though haven't bought any Tacticals yet, don't need the Cyclone's currently), Through some shaving I can make the Chaos bits useable for regular Termies (admittedly I buy them for the Combi-Weapons and Autocannon, playing Heresy era) and the regular Terminators are good to go with mixing in and creating Terminators which aren't overadorned with Wolfy style. If you've got spare Typhoon pods (though that config is one of the greatest setups for a Land Speeder you could mount them. Link to comment https://bolterandchainsword.com/topic/208168-cyclone-missile-launchers/#findComment-2483801 Share on other sites More sharing options...
Sarapham Posted August 8, 2010 Share Posted August 8, 2010 Hey all, this is my first topic and I wanted to ask a question... what do you all use for the Cyclone Missile Launchers on your Wolf Guard? Recently I was given a Logan model so decided to try my hand at the all wolf guard list and being fairly new (only played about 4 months) I neglected ranged anti-tank weaponry. Since then I have learned my lesson and have been looking around at possible options... my first one is packing a Havoc Launcher from a chaos vehicle sprue as his CML and it looks rather comical but also completely awesome. If I can figure out how to post up a picture I will. So what I want to know is, what do you use? Hmmm, well, you could always just use a Cyclone Missile Launcher. V Jeez, 12 bucks + postage for a cyclone... damn. Link to comment https://bolterandchainsword.com/topic/208168-cyclone-missile-launchers/#findComment-2483857 Share on other sites More sharing options...
Thunderhawk3015 Posted August 8, 2010 Share Posted August 8, 2010 Or just collect a couple standard termi boxes and use all the bitz combined with the leftovers from a SW Termi box and you have 2 cyclone missile launcers and more Termis for Loganwing. Link to comment https://bolterandchainsword.com/topic/208168-cyclone-missile-launchers/#findComment-2483859 Share on other sites More sharing options...
Valerian Posted August 8, 2010 Share Posted August 8, 2010 Hmmm, well, you could always just use a Cyclone Missile Launcher. V Jeez, 12 bucks + postage for a cyclone... damn. Yeah, that one will be too expensive; it was just the first one that I found in a random eBay search for CMLs. The point was that they are out there at the bitz sites and on eBay, and you could always go to a website like the Rogue Market and trade your spare bitz for them. You don't have to try to figure out a way to kit-bash them (unless you just want to), since the real thing is out there. V Link to comment https://bolterandchainsword.com/topic/208168-cyclone-missile-launchers/#findComment-2484011 Share on other sites More sharing options...
Skalver Posted August 8, 2010 Share Posted August 8, 2010 Some options you might have around: Hunter-Killer Missiles from various kits (the ones on the Ironclad would look fantastic). Deathwind Assault launchers from Drop Pods. Smoke Launchers from Dreadnoughts. Things that could make cool conversion parts: Mortis dreadnought arms from forge world. Death Korps of Krieg Mole Launchers http://www.forgeworld.co.uk/Warhammer-4000...E-LAUNCHER.html I think the mole launcher would look fantastic as a conversion, I have never seen the kit though so I have no idea how much conversion work it would involve (i.e. whether the weapon is a single part or would you have to hack arms off of it all day). By the way, if you are doing a Logan Wing you are possibly needing lots of regular missile launchers too. The new space marine special weapons pack on forge world has two recreations of the old RTB01 sprew missile launcher which look fantastic I think. You will be able to buy a pack of Space Wolves + 4 packs of those weapons for less than the cost of two devastator squads and you will have lots of meltaguns, flamers and Space Wolf parts left over at the end. Link to comment https://bolterandchainsword.com/topic/208168-cyclone-missile-launchers/#findComment-2484047 Share on other sites More sharing options...
Godhead Posted August 9, 2010 Share Posted August 9, 2010 I used the missile launcher off of the IG sentinel kit. I turned out pretty nice IMO. Link to comment https://bolterandchainsword.com/topic/208168-cyclone-missile-launchers/#findComment-2484629 Share on other sites More sharing options...
Lord Clinto Posted August 9, 2010 Share Posted August 9, 2010 I bought a bunch of assembled SW termies off of ebay and one of them was a converted Cyclone using the plastic Typhoon Missile Launchers. FREAKING HUGE CYCLONE! Link to comment https://bolterandchainsword.com/topic/208168-cyclone-missile-launchers/#findComment-2484649 Share on other sites More sharing options...
spjaco Posted August 9, 2010 Share Posted August 9, 2010 I bought a bunch of assembled SW termies off of ebay and one of them was a converted Cyclone using the plastic Typhoon Missile Launchers. FREAKING HUGE CYCLONE! Pics MAN!!!! Post some of it! AAWWWOOOO! Link to comment https://bolterandchainsword.com/topic/208168-cyclone-missile-launchers/#findComment-2484704 Share on other sites More sharing options...
nurglez Posted August 9, 2010 Share Posted August 9, 2010 i reckon if you could cut a havoc launcher in half (so 3 missiles each one), it would look allright... Link to comment https://bolterandchainsword.com/topic/208168-cyclone-missile-launchers/#findComment-2484888 Share on other sites More sharing options...
Quillen Posted August 10, 2010 Share Posted August 10, 2010 Well, I use Cyclones for cyclones. lol Like the guy above said. It's the best option, and you can find them here and there. Link to comment https://bolterandchainsword.com/topic/208168-cyclone-missile-launchers/#findComment-2484977 Share on other sites More sharing options...
Trud Coldfist Posted August 10, 2010 Share Posted August 10, 2010 I use the missle pod from a valkryie gunship, its as big as he is, b ut thats why its awesome Link to comment https://bolterandchainsword.com/topic/208168-cyclone-missile-launchers/#findComment-2485028 Share on other sites More sharing options...
Chodjinn Posted August 10, 2010 Share Posted August 10, 2010 I use Deathwind Missile Launchers from Drop Pod packs, but they require a fair amount of cutting to fit on the curve of the TDA armour. Currently got two built but not painted, they look awesome but not massively overbearing. Link to comment https://bolterandchainsword.com/topic/208168-cyclone-missile-launchers/#findComment-2485205 Share on other sites More sharing options...
Valerian Posted August 10, 2010 Share Posted August 10, 2010 Well, I use Cyclones for cyclones. lol Like the guy above said. It's the best option, and you can find them here and there. Yeah, I even think I might still have a few old metal ones. If anyone desperately wants them, send me a PM; they look pretty much just like the new plastics, and with 40mm bases, your models won't be too top-heavy. Valerian EDIT: I've already got a taker, so the offer is closed. Link to comment https://bolterandchainsword.com/topic/208168-cyclone-missile-launchers/#findComment-2485364 Share on other sites More sharing options...
Macharim Posted August 10, 2010 Share Posted August 10, 2010 I have two equipped with the old metal cyclones and can confirm that they work just fine. Rock steady and look very nice. Link to comment https://bolterandchainsword.com/topic/208168-cyclone-missile-launchers/#findComment-2485692 Share on other sites More sharing options...
Fred Johnson the 3rd jr Posted January 3, 2011 Share Posted January 3, 2011 I used the missile launcher off of the IG sentinel kit. I turned out pretty nice IMO. I know this is a thread lich, but since I would have started another thread otherwise... Anyone have pics of terminators with Sentinel missiles or Deathwind missile launchers on them? Also, how lame or not lame would it look to have half of a landspeeder Typhoon set on a termie? I am trying to decide between these three options since the actual CML piece is ridiculously expensive. Link to comment https://bolterandchainsword.com/topic/208168-cyclone-missile-launchers/#findComment-2605428 Share on other sites More sharing options...
Sarapham Posted January 3, 2011 Share Posted January 3, 2011 This is my Deathwind CML: http://img402.imageshack.us/img402/3336/imag0034c.jpg http://img218.imageshack.us/img218/6884/imag0035xg.jpg Link to comment https://bolterandchainsword.com/topic/208168-cyclone-missile-launchers/#findComment-2605443 Share on other sites More sharing options...
imperious Posted January 3, 2011 Share Posted January 3, 2011 Yeah, I used the typhoon launcher too. Works pretty well. Link to comment https://bolterandchainsword.com/topic/208168-cyclone-missile-launchers/#findComment-2605883 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.