WingsOfTheFalcon Posted October 25, 2010 Share Posted October 25, 2010 Hi guys, Just a quicky as I thought I'd show you how I built my own version of the PA Heavy Flamer. I've seen a few floating around that use terminator bits, but felt they were a bit chunky for the 'Assault' classification of the weapon. What you need: IG Command Heavy Flamer (Catachan or Cadian) http://b.imagehost.org/t/0565/HF1.jpg Meltabomb: http://b.imagehost.org/t/0555/MB.jpg Firstly chop off the handle from the Meltabomb http://b.imagehost.org/t/0182/MB2.jpg Remove the IG arm and the fuel hose from the flamer, then file the hose space with a round file so it fits snugly onto the Meltabomb. You'll also need to carve off the IF hand, though this will be covered over by your marine hand so it's ok if it's not too neat. http://b.imagehost.org/t/0616/HF2.jpg Finally glue the meltabomb/fuel canister sideways into the gap you've filed. http://d.imagehost.org/t/0938/DSC00355.jpg End result: http://b.imagehost.org/t/0491/DSC00371.jpghttp://b.imagehost.org/t/0590/DSC00372.jpg Hope you like it, any questions then fire away! Link to comment https://bolterandchainsword.com/topic/213839-tutorial-pa-heavy-flamer/ Share on other sites More sharing options...
Baal Dropout Posted October 25, 2010 Share Posted October 25, 2010 I like it!!! Thanks for the tut :D :tu: Link to comment https://bolterandchainsword.com/topic/213839-tutorial-pa-heavy-flamer/#findComment-2544653 Share on other sites More sharing options...
emperorsaxe Posted October 25, 2010 Share Posted October 25, 2010 Very very interesting thanks for the tut. Respects, Emperorsaxe Link to comment https://bolterandchainsword.com/topic/213839-tutorial-pa-heavy-flamer/#findComment-2544751 Share on other sites More sharing options...
chaplain belisarius Posted October 25, 2010 Share Posted October 25, 2010 wow! thanks for that! :lol: Link to comment https://bolterandchainsword.com/topic/213839-tutorial-pa-heavy-flamer/#findComment-2544840 Share on other sites More sharing options...
Montuhotep Posted October 25, 2010 Share Posted October 25, 2010 Very good! Neat, clean and looks excellent. Link to comment https://bolterandchainsword.com/topic/213839-tutorial-pa-heavy-flamer/#findComment-2544894 Share on other sites More sharing options...
Myxx Posted October 25, 2010 Share Posted October 25, 2010 Very cool. Uhm, stupid question... what models come with a meltabomb on the sprues? I don't have any, and all of my attempts to GS one have been utter failures... Link to comment https://bolterandchainsword.com/topic/213839-tutorial-pa-heavy-flamer/#findComment-2544959 Share on other sites More sharing options...
The Normish Posted October 25, 2010 Share Posted October 25, 2010 Very cool. Uhm, stupid question... what models come with a meltabomb on the sprues? I don't have any, and all of my attempts to GS one have been utter failures... The Assault Squad has a few, and I think the Command Squad does as well (not sure about that one though). Link to comment https://bolterandchainsword.com/topic/213839-tutorial-pa-heavy-flamer/#findComment-2544972 Share on other sites More sharing options...
Pig Of Sparta Posted October 25, 2010 Share Posted October 25, 2010 A very precise and easy to follow tutorial for something that to be honest, really needed an easy way to be done. I think this could be Librarium worthy.... Nice one James Link to comment https://bolterandchainsword.com/topic/213839-tutorial-pa-heavy-flamer/#findComment-2545160 Share on other sites More sharing options...
WingsOfTheFalcon Posted October 25, 2010 Author Share Posted October 25, 2010 Thanks for all the great feedback guys, really glad that the tutorial will be of use. :D Link to comment https://bolterandchainsword.com/topic/213839-tutorial-pa-heavy-flamer/#findComment-2545209 Share on other sites More sharing options...
The Normish Posted October 26, 2010 Share Posted October 26, 2010 Yeah, I wish I hadn't stuck all those IG Heavy flamers on Guardsmen now... Link to comment https://bolterandchainsword.com/topic/213839-tutorial-pa-heavy-flamer/#findComment-2545356 Share on other sites More sharing options...
Meatman Posted October 26, 2010 Share Posted October 26, 2010 Hope you like it, any questions the fire away! Cheeky :P Very nice tutorial, easy to follow steps with great pics along the way. Thanks for posting :) Link to comment https://bolterandchainsword.com/topic/213839-tutorial-pa-heavy-flamer/#findComment-2545559 Share on other sites More sharing options...
ShinyRhino Posted October 26, 2010 Share Posted October 26, 2010 Nice work. Simple, and parts are readily available. Link to comment https://bolterandchainsword.com/topic/213839-tutorial-pa-heavy-flamer/#findComment-2545675 Share on other sites More sharing options...
WingsOfTheFalcon Posted October 28, 2010 Author Share Posted October 28, 2010 A very precise and easy to follow tutorial for something that to be honest, really needed an easy way to be done. I think this could be Librarium worthy.... Nice one James Submitted, fingers crossed! :) Link to comment https://bolterandchainsword.com/topic/213839-tutorial-pa-heavy-flamer/#findComment-2547524 Share on other sites More sharing options...
The Normish Posted October 28, 2010 Share Posted October 28, 2010 Ha! I found a spare IG Heavy flamer! I'll be printing this out and putting it to the test! Link to comment https://bolterandchainsword.com/topic/213839-tutorial-pa-heavy-flamer/#findComment-2547650 Share on other sites More sharing options...
WingsOfTheFalcon Posted October 28, 2010 Author Share Posted October 28, 2010 Ha! I found a spare IG Heavy flamer! I'll be printing this out and putting it to the test! Pictures please!! Link to comment https://bolterandchainsword.com/topic/213839-tutorial-pa-heavy-flamer/#findComment-2547973 Share on other sites More sharing options...
The Normish Posted October 29, 2010 Share Posted October 29, 2010 Ha! I found a spare IG Heavy flamer! I'll be printing this out and putting it to the test! Pictures please!! Picture will come later, but honestly, it's a lot smaller than I expected... Link to comment https://bolterandchainsword.com/topic/213839-tutorial-pa-heavy-flamer/#findComment-2548940 Share on other sites More sharing options...
WingsOfTheFalcon Posted November 3, 2010 Author Share Posted November 3, 2010 There's a joke in there somewhere just dying to get out! In honesty I like the fact that it is similar to the size of an existing Flamer, as it seems to match up with an 'assault' weapon, rather than a 'heavy' weapon. Link to comment https://bolterandchainsword.com/topic/213839-tutorial-pa-heavy-flamer/#findComment-2552760 Share on other sites More sharing options...
CainTheHunter Posted November 3, 2010 Share Posted November 3, 2010 Nice and simple conversion. Btw, if You use Catachan flamer, You actually don't need a meltabomb, since it comes with a canister already. Link to comment https://bolterandchainsword.com/topic/213839-tutorial-pa-heavy-flamer/#findComment-2552825 Share on other sites More sharing options...
WingsOfTheFalcon Posted November 3, 2010 Author Share Posted November 3, 2010 Nice and simple conversion. Btw, if You use Catachan flamer, You actually don't need a meltabomb, since it comes with a canister already. Good point, and also you have to do less trimming to remove the arm/hand. Shame I ordered the Cadian one really! Link to comment https://bolterandchainsword.com/topic/213839-tutorial-pa-heavy-flamer/#findComment-2553101 Share on other sites More sharing options...
The Normish Posted November 3, 2010 Share Posted November 3, 2010 There's a joke in there somewhere just dying to get out! Oh God no! What have I done? In honesty I like the fact that it is similar to the size of an existing Flamer, as it seems to match up with an 'assault' weapon, rather than a 'heavy' weapon. That's just it though... It is a heavy weapon, and while it looks as such on Imperial Guardsmen, it doesn't on a Space Marine. Link to comment https://bolterandchainsword.com/topic/213839-tutorial-pa-heavy-flamer/#findComment-2553200 Share on other sites More sharing options...
WingsOfTheFalcon Posted November 4, 2010 Author Share Posted November 4, 2010 While it looks as such on Imperial Guardsmen, it doesn't on a Space Marine.I guess this one come down to personal taste. In my eyes because in the rules of the game it's classified as 'Assault' I prefer it to look a bit more mobile, though this does conflict with the fact it's called a 'Heavy' Flamer. :D Link to comment https://bolterandchainsword.com/topic/213839-tutorial-pa-heavy-flamer/#findComment-2553597 Share on other sites More sharing options...
aekold Posted November 9, 2010 Share Posted November 9, 2010 Not to mention the fact that an ASSAULT cannon is in fact a Heavy weapon. Maybe is should be assault flamer and heavy cannon. Link to comment https://bolterandchainsword.com/topic/213839-tutorial-pa-heavy-flamer/#findComment-2557501 Share on other sites More sharing options...
WingsOfTheFalcon Posted November 9, 2010 Author Share Posted November 9, 2010 Heavy Cannon sounds pretty brutal, like a WHFB Seige Weapon... appropriate for TDA Marines defiantely! :P Link to comment https://bolterandchainsword.com/topic/213839-tutorial-pa-heavy-flamer/#findComment-2557546 Share on other sites More sharing options...
Task Force Gauntlet Posted February 19, 2011 Share Posted February 19, 2011 I have an easier way, take the catachan command squad heavy flamer and file off the hand, the thing fits perfectly. Link to comment https://bolterandchainsword.com/topic/213839-tutorial-pa-heavy-flamer/#findComment-2664433 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.