yowsaman Posted April 28, 2011 Share Posted April 28, 2011 allready posted these guy's in another topic over at the ordo inquisition. but probably not everybody goes there :D so i taught i would post them here also. These are two models that are done for me by Artisans workshop as a commission job. The first one is a GK librarian and the second one a rifle dread. in my opinion a verry nice job this guy did for me. especially with the libby who's unique in his own way as i wanted to use a different model then the one that is avaliable. The dreadnought does need some little finishing on the banner and a few washes. Otherwise is al done. still to come some terminators and GSSS. comments alway's welcome as alway's. GK librarian: http://i661.photobucket.com/albums/uu339/yowsaman/front_1.jpg http://i661.photobucket.com/albums/uu339/yowsaman/front_2.jpg http://i661.photobucket.com/albums/uu339/yowsaman/back_1.jpg dreadnought: http://i661.photobucket.com/albums/uu339/yowsaman/right.jpg http://i661.photobucket.com/albums/uu339/yowsaman/left.jpg http://i661.photobucket.com/albums/uu339/yowsaman/front_a.jpg http://i661.photobucket.com/albums/uu339/yowsaman/top_view.jpg cheers tim Link to comment https://bolterandchainsword.com/topic/228584-gk-commision-work-done-for-me/ Share on other sites More sharing options...
WingsOfTheFalcon Posted April 28, 2011 Share Posted April 28, 2011 Hey there, Great minis, one question though. Did you specify that the Dread would be battle damaged and the Librarian wouldn't? Seems a little inconsistant. Superb paintwork though. :D Link to comment https://bolterandchainsword.com/topic/228584-gk-commision-work-done-for-me/#findComment-2739945 Share on other sites More sharing options...
yowsaman Posted April 28, 2011 Author Share Posted April 28, 2011 yeah i did. i dont mind that they may look inconsistant maybe. i'll just explain that the dreadnought atracts more fire then the libby :) Link to comment https://bolterandchainsword.com/topic/228584-gk-commision-work-done-for-me/#findComment-2740004 Share on other sites More sharing options...
Brother Nihm Posted April 28, 2011 Share Posted April 28, 2011 You could always explain as he's older, requires more maintenance and is more battle-hardened. :) Great looking models! Link to comment https://bolterandchainsword.com/topic/228584-gk-commision-work-done-for-me/#findComment-2740008 Share on other sites More sharing options...
MagicMan Posted April 28, 2011 Share Posted April 28, 2011 Cool to see one the Sanguinary masks painted as a face, always wondered how it would look. The guy who painted these has done a great job. Link to comment https://bolterandchainsword.com/topic/228584-gk-commision-work-done-for-me/#findComment-2740020 Share on other sites More sharing options...
Isiah Posted April 28, 2011 Share Posted April 28, 2011 I'll echo all the above plus: the banners are awesome sauce. Cheers I Link to comment https://bolterandchainsword.com/topic/228584-gk-commision-work-done-for-me/#findComment-2740597 Share on other sites More sharing options...
ozris Posted April 29, 2011 Share Posted April 29, 2011 They dread looks fantastic, especially due to the weathering - though I can't imagine them getting rusty due to a lack of constant maintenance..... And the Sang Guard mask being painted as a face really creeps me out! <_< Link to comment https://bolterandchainsword.com/topic/228584-gk-commision-work-done-for-me/#findComment-2741016 Share on other sites More sharing options...
roder Posted April 30, 2011 Share Posted April 30, 2011 Looks great! Where did those autocannons on the dread come from? Link to comment https://bolterandchainsword.com/topic/228584-gk-commision-work-done-for-me/#findComment-2742061 Share on other sites More sharing options...
yowsaman Posted April 30, 2011 Author Share Posted April 30, 2011 Looks great! Where did those autocannons on the dread come from? forge world. as did the whole dreadnought actually. Link to comment https://bolterandchainsword.com/topic/228584-gk-commision-work-done-for-me/#findComment-2742114 Share on other sites More sharing options...
Morollan Posted April 30, 2011 Share Posted April 30, 2011 The second picture of the GK looks like an awesome facepalm :lol: Link to comment https://bolterandchainsword.com/topic/228584-gk-commision-work-done-for-me/#findComment-2742243 Share on other sites More sharing options...
yowsaman Posted April 30, 2011 Author Share Posted April 30, 2011 The second picture of the GK looks like an awesome facepalm :( yeah on foto it is indeed a "d'oh!" moment ;) luckely irl it aint :P Link to comment https://bolterandchainsword.com/topic/228584-gk-commision-work-done-for-me/#findComment-2742375 Share on other sites More sharing options...
KJB Posted April 30, 2011 Share Posted April 30, 2011 Looks great, face kind of reminds me of when Robocop took his helmet off mind you (minus the halo of course...) He did a cracking job!! Link to comment https://bolterandchainsword.com/topic/228584-gk-commision-work-done-for-me/#findComment-2742501 Share on other sites More sharing options...
yowsaman Posted May 25, 2011 Author Share Posted May 25, 2011 new update on the commission work done for me. 8 terminators and 5 GKSS next up is my stormraven. if i can find a bigg enough box to send him in :D ;) have fun watching and CC welcome as alway's http://i661.photobucket.com/albums/uu339/yowsaman/GK_squad_001.jpg http://i661.photobucket.com/albums/uu339/yowsaman/grey_knights_terminators_1.jpg cheers Link to comment https://bolterandchainsword.com/topic/228584-gk-commision-work-done-for-me/#findComment-2770185 Share on other sites More sharing options...
Jimmy Carmine Posted May 25, 2011 Share Posted May 25, 2011 These look fantastic! And the Sang Guard mask being painted as a face really creeps me out! :ph34r: It looks awesome, but creepy as well, it reminds me of Robocop with his helmet off. http://jim028.net/wp-content/uploads/2011/05/robocop.jpg http://i661.photobucket.com/albums/uu339/yowsaman/front_2.jpg Unintentionally you have created the best facepalm picture since Picard. ;) Link to comment https://bolterandchainsword.com/topic/228584-gk-commision-work-done-for-me/#findComment-2770194 Share on other sites More sharing options...
yowsaman Posted May 25, 2011 Author Share Posted May 25, 2011 These look fantastic! And the Sang Guard mask being painted as a face really creeps me out! :ph34r: It looks awesome, but creepy as well, it reminds me of Robocop with his helmet off. http://jim028.net/wp-content/uploads/2011/05/robocop.jpg http://i661.photobucket.com/albums/uu339/yowsaman/front_2.jpg Unintentionally you have created the best facepalm picture since Picard. ;) and i'm proud of that ;) some humor in an army is alway's fun :P Link to comment https://bolterandchainsword.com/topic/228584-gk-commision-work-done-for-me/#findComment-2770199 Share on other sites More sharing options...
beno Posted May 25, 2011 Share Posted May 25, 2011 First up - thanks for all the positive comments etc. All criticisms, positives and negatives, are very much appreciated ;) I thought I'd elaborate on the autocannon question from earlier, since I'm not sure if I even explained this much to Yowsaman, oops. They are Forgeworld but neither of us noticed they have two types of autocannon, one type for one side of the dread and two types for the other side. The matching 'other' side doesn't seem to appear in the search options and I only found it after extensively scanning through the Forgeworld site wondering why we had a mismatched pair! In short I had to chop all the barrels off, lengthen some of them and do some filling and filing to match, and swap them around so that the two sides looked symmetrical. The only noticeable bit is the magazines where you can see the rounds on his right, but the left hand ones are covered. Still, it makes for some fairly unique looking weapons :P I'm glad the Sanguinary mask is creeping people out, kinda what I had in mind for the guy, though putting the eyeballs into it was pretty tricky work! Link to comment https://bolterandchainsword.com/topic/228584-gk-commision-work-done-for-me/#findComment-2770346 Share on other sites More sharing options...
beno Posted May 25, 2011 Share Posted May 25, 2011 Also, just had a thought... Would anyone be interested if I did a project log of the stormraven when it arrives? Its surely big enough to warrant some serious WIP shots. How would you feel about that Yowsaman? Link to comment https://bolterandchainsword.com/topic/228584-gk-commision-work-done-for-me/#findComment-2770352 Share on other sites More sharing options...
Frater Uriah Posted May 25, 2011 Share Posted May 25, 2011 Prime Directives: 1. Serve the public trust 2. Purge the Daemon 3. Abhor the Witch 4. (depends on what Mat Ward says it is) Seriously, great models! I do agree that he looks like a haloed Robocop, so good on you for that! And it is an epic facepalm. Very nice work, overall on all your GKs! And yes, Stormraven WIP would be good to see. I'm slogging my way for the one I got for my Flesh Tearers... though that project is unfortunately on hold until I'm finished moving back to the States. I, for one, would be interested in seeing how you tackle it. Link to comment https://bolterandchainsword.com/topic/228584-gk-commision-work-done-for-me/#findComment-2770359 Share on other sites More sharing options...
yowsaman Posted May 25, 2011 Author Share Posted May 25, 2011 First up - thanks for all the positive comments etc. All criticisms, positives and negatives, are very much appreciated ;) I thought I'd elaborate on the autocannon question from earlier, since I'm not sure if I even explained this much to Yowsaman, oops. They are Forgeworld but neither of us noticed they have two types of autocannon, one type for one side of the dread and two types for the other side. The matching 'other' side doesn't seem to appear in the search options and I only found it after extensively scanning through the Forgeworld site wondering why we had a mismatched pair! In short I had to chop all the barrels off, lengthen some of them and do some filling and filing to match, and swap them around so that the two sides looked symmetrical. The only noticeable bit is the magazines where you can see the rounds on his right, but the left hand ones are covered. Still, it makes for some fairly unique looking weapons :P I'm glad the Sanguinary mask is creeping people out, kinda what I had in mind for the guy, though putting the eyeballs into it was pretty tricky work! wow ben i did not know about those cannons. lol you really had your work with them. i really had no idea there where two types of them :D ;) about the Wip for the stormraven. yeah go ahead. would be really nice to follow this on the site. just found a bigg enough box in the post office to send :) greetz Link to comment https://bolterandchainsword.com/topic/228584-gk-commision-work-done-for-me/#findComment-2770432 Share on other sites More sharing options...
Jimmy Carmine Posted May 25, 2011 Share Posted May 25, 2011 Unintentionally you have created the best facepalm picture since Picard. ;) and i'm proud of that :D some humor in an army is alway's fun :P http://jim028.net/wp-content/uploads/2011/05/thumbsup.gif Would anyone be interested if I did a project log of the stormraven when it arrives? Its surely big enough to warrant some serious WIP shots. Sounds like a fantastic idea to me! Link to comment https://bolterandchainsword.com/topic/228584-gk-commision-work-done-for-me/#findComment-2770457 Share on other sites More sharing options...
beno Posted May 28, 2011 Share Posted May 28, 2011 For those that are interested I have put the first couple of photos up of the PLOG for the stormraven. The link to the project log is: http://www.bolterandchainsword.com/index.p...howtopic=230725 Enjoy ^_^ Link to comment https://bolterandchainsword.com/topic/228584-gk-commision-work-done-for-me/#findComment-2773898 Share on other sites More sharing options...
yowsaman Posted September 21, 2011 Author Share Posted September 21, 2011 ok been a while since i posted somthing in this thread. in the meanwhile dear beno :D did some more commission for me. wich includes a grand master converted from a model from hitec miniatures and GW kit. unfortnatly i dont think i have a picture of him. maybe beno does? i can tell you guy's he really is sick! :) next up and still in progress are 5 purifiers wich i wanted them to have "monk" kinda look. (looking good so far) a razorback as transport and 5 more gkss with a rhino as transport. here som pictures of them as work in progress. CC alway's welcome http://i661.photobucket.com/albums/uu339/yowsaman/tanks_etc_basecoats_002.jpg http://i661.photobucket.com/albums/uu339/yowsaman/tanks_etc_basecoats.jpg cheers Link to comment https://bolterandchainsword.com/topic/228584-gk-commision-work-done-for-me/#findComment-2881325 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.