Prot Posted May 5, 2011 Share Posted May 5, 2011 As I'm working on different schemes for my next attempt at my Space Wolves, I considered using the Great Company symbol, but of course there's no decal! Does anyone have any ideas the best way to do this? Or am I looking at hand painting them all? For right now I am using Herald Deathwolf's company. I use a basic deep red, and I take the symbol from Grimnar's original company since it is fairly close. I may stick to that but I'm just wondering what you guys have done. Link to comment https://bolterandchainsword.com/topic/229110-how-to-make-the-great-company-army-symbol/ Share on other sites More sharing options...
Forté Posted May 5, 2011 Share Posted May 5, 2011 Look in the download section. There's printable decals for all the GC. Just need decal printer paper. Link to comment https://bolterandchainsword.com/topic/229110-how-to-make-the-great-company-army-symbol/#findComment-2747859 Share on other sites More sharing options...
DV8 Posted May 5, 2011 Share Posted May 5, 2011 I have two of the Forgeworld transfer sheets . I've used all of the ones for Logan's "The Wolf That Stalks The Stars", but if you can point out to me which transfers you'd need, I'd be more than happy to send them your way (as I'm literally never going to use the rest of it). Bear in mind there are only 21 infantry sized transfers and 5 terminator sized transfers per Great Company per sheet, so at most I would only have enough for 42 infantry and 10 terminators. DV8 Link to comment https://bolterandchainsword.com/topic/229110-how-to-make-the-great-company-army-symbol/#findComment-2747871 Share on other sites More sharing options...
Matt D Posted May 5, 2011 Share Posted May 5, 2011 I have two of the Forgeworld transfer sheets . I've used all of the ones for Logan's "The Wolf That Stalks The Stars", but if you can point out to me which transfers you'd need, I'd be more than happy to send them your way (as I'm literally never going to use the rest of it). Bear in mind there are only 21 infantry sized transfers and 5 terminator sized transfers per Great Company per sheet, so at most I would only have enough for 42 infantry and 10 terminators. DV8 do you have sven bloodhowl? i could defenantly use that. you know....if your offering :) Link to comment https://bolterandchainsword.com/topic/229110-how-to-make-the-great-company-army-symbol/#findComment-2747874 Share on other sites More sharing options...
Prot Posted May 5, 2011 Author Share Posted May 5, 2011 I have two of the Forgeworld transfer sheets . I've used all of the ones for Logan's "The Wolf That Stalks The Stars", but if you can point out to me which transfers you'd need, I'd be more than happy to send them your way (as I'm literally never going to use the rest of it). Bear in mind there are only 21 infantry sized transfers and 5 terminator sized transfers per Great Company per sheet, so at most I would only have enough for 42 infantry and 10 terminators. DV8 Thanks, I may take you up on that and maybe I can return the favour when I order some new sheets... What I can't tell though is if Harald Deathwolf's symbol is in there.. it's kind of tiny... is it there? My other consideration was Bran Redmaw but I can definitely see his... Link to comment https://bolterandchainsword.com/topic/229110-how-to-make-the-great-company-army-symbol/#findComment-2747939 Share on other sites More sharing options...
Sarapham Posted May 5, 2011 Share Posted May 5, 2011 You can always try freehanding them, there is an old thread where a brother (Forgive me for not remembering who right now) has done some tutorials for freehanding many of the Great Company markings. With some practise one can make rather good marks oneself, although I admit it can be very hard on PA shoulder plates. Link to comment https://bolterandchainsword.com/topic/229110-how-to-make-the-great-company-army-symbol/#findComment-2747948 Share on other sites More sharing options...
Prot Posted May 5, 2011 Author Share Posted May 5, 2011 I did find a tutorial on the BnC on doing a few of the markings, and while they're great, I find it's just too time consuming. I would really rather spend that time painting the figs, and not the symbols.... I think DV8 is right though, Herald Deathwolf's symbol does seem to be on the newer Forgeworld decal sheet. Link to comment https://bolterandchainsword.com/topic/229110-how-to-make-the-great-company-army-symbol/#findComment-2748016 Share on other sites More sharing options...
Forté Posted May 5, 2011 Share Posted May 5, 2011 I have two of the Forgeworld transfer sheets . I've used all of the ones for Logan's "The Wolf That Stalks The Stars", but if you can point out to me which transfers you'd need, I'd be more than happy to send them your way (as I'm literally never going to use the rest of it). Bear in mind there are only 21 infantry sized transfers and 5 terminator sized transfers per Great Company per sheet, so at most I would only have enough for 42 infantry and 10 terminators. DV8 I know this is cheeky but do you have the Bran Redmaw ones going? I'm in the UK though. If there's bits your after I'll be happy to see if I have them and swap (no missile launchers before you ask). Link to comment https://bolterandchainsword.com/topic/229110-how-to-make-the-great-company-army-symbol/#findComment-2748234 Share on other sites More sharing options...
Max_Dammit Posted May 5, 2011 Share Posted May 5, 2011 I use a vinyl cutter at work so i make al my symbols out of vinyl car stikkers =P This only works in one colour designs and it doesnt get to be to detailed, but it works great, i have over a 300 company symbols and GH, longfang, BC and wolfguard symbols :D Link to comment https://bolterandchainsword.com/topic/229110-how-to-make-the-great-company-army-symbol/#findComment-2748262 Share on other sites More sharing options...
Prot Posted May 5, 2011 Author Share Posted May 5, 2011 Sweet... must be nice... But I think although expensive, the Forgeworld decal sheet does seem to have Harald Deathwolf symbols. Which is a good thing once I make it worth ordering something. Link to comment https://bolterandchainsword.com/topic/229110-how-to-make-the-great-company-army-symbol/#findComment-2748270 Share on other sites More sharing options...
Forté Posted May 5, 2011 Share Posted May 5, 2011 C I use a vinyl cutter at work so i make al my symbols out of vinyl car stikkers =P This only works in one colour designs and it doesnt get to be to detailed, but it works great, i have over a 300 company symbols and GH, longfang, BC and wolfguard symbols :D Got any examples? Be interesting to see. Link to comment https://bolterandchainsword.com/topic/229110-how-to-make-the-great-company-army-symbol/#findComment-2748311 Share on other sites More sharing options...
Max_Dammit Posted May 6, 2011 Share Posted May 6, 2011 My avatar Dont look at the colour, I hate the way shadow gray turns blue http://members.home.nl/maxdammit/40k/cover.jpg http://members.home.nl/maxdammit/40k/Dice.jpg http://members.home.nl/maxdammit/40k/Wolfpriest_TDA.jpg http://members.home.nl/maxdammit/40k/Bolterandchainsword/BPC2009/WolfguardACPF.jpg I have a small red claw for my bloodclaws that you can just about see in this pic in front of the landraider, the one with the black hair and the powerfist http://members.home.nl/maxdammit/40k/Full%...%2014-01-11.jpg Link to comment https://bolterandchainsword.com/topic/229110-how-to-make-the-great-company-army-symbol/#findComment-2748763 Share on other sites More sharing options...
MaveriK Posted May 6, 2011 Share Posted May 6, 2011 http://www.bolterandchainsword.com/index.p...howtopic=184638 :huh: Link to comment https://bolterandchainsword.com/topic/229110-how-to-make-the-great-company-army-symbol/#findComment-2748806 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.