DaBoiKyknos Posted April 4, 2017 Share Posted April 4, 2017 Very cool blueish black (blackish blue?) on that inquisitor! Link to comment https://bolterandchainsword.com/topic/240799-crimson-tears-deathwatch-and-inq28-updated-050223/page/28/#findComment-4703643 Share on other sites More sharing options...
NightHunters Posted April 4, 2017 Share Posted April 4, 2017 That Chaplain though. I demand paint immediately. Will we be highlighting each feather of the cruzius with a power edge, i think we should. Link to comment https://bolterandchainsword.com/topic/240799-crimson-tears-deathwatch-and-inq28-updated-050223/page/28/#findComment-4703679 Share on other sites More sharing options...
Augustus b'Raass Posted April 4, 2017 Share Posted April 4, 2017 Badass chaplain you got there, sock. Impressive. Most impressive. Link to comment https://bolterandchainsword.com/topic/240799-crimson-tears-deathwatch-and-inq28-updated-050223/page/28/#findComment-4703727 Share on other sites More sharing options...
sockwithaticket Posted April 10, 2017 Author Share Posted April 10, 2017 A bit more Deathwatch while I cool on Crimson Tears stuff in the lead up to the ETL.Completed Silver Eagle:WIP Carcharodon:Vairocanum - Thank you very much. Yeah, as the final part of my vow I figured he had to be even more special, plus if you make your own of something like a Chaplain it has to kick ass. ETL's not a million miles away so paint shouldn't be too far off.Bio - Blimey, high praise; thank you!Kierdale - Thanks, man. The blood and sweat flowed more readily than usual with this guy, so I'm glad it was all worthwhile.Thousand Eyes - Cheers.Jol - I don't know if they still do the urban basing bundle that I purchased, but it's primarily Gale Force 9 stuff: Concrete rubble, rocky basing grit, medium basing grit and fine basing grit. Topped off with a bit of Army Painter Brown Battleground.Lord Velype - Cheers, I picked the base paint up on spec because it looked interesting and I'm glad to have found a good use for it.NightHunters - You are attempting to lead me down the path of madness, my good man. And I don't have a good reason not to try it... He should be getting his colourisation during the ETL along with the other Great Baalite Bake Off stuff.Augustus - Cheers, buddy. I really wanted him to give a 'don't mess with me' vibe (more than ceramite clad, genetically modified super soldiers normally do). deathspectersgt7, Biohazard, Augustus b'Raass and 2 others 5 Back to top Link to comment https://bolterandchainsword.com/topic/240799-crimson-tears-deathwatch-and-inq28-updated-050223/page/28/#findComment-4708443 Share on other sites More sharing options...
deathspectersgt7 Posted April 10, 2017 Share Posted April 10, 2017 The Silver Eagle Brother looks Great !!! And the Carcharadon is looking good . Link to comment https://bolterandchainsword.com/topic/240799-crimson-tears-deathwatch-and-inq28-updated-050223/page/28/#findComment-4708476 Share on other sites More sharing options...
Vairocanum Posted April 11, 2017 Share Posted April 11, 2017 Great work on the Silver Eagle and the Carcharodon looks great so far! How many more deathwatch members are you planning and maybe a group shot of all the deathwatch together (pretty please)? Link to comment https://bolterandchainsword.com/topic/240799-crimson-tears-deathwatch-and-inq28-updated-050223/page/28/#findComment-4708714 Share on other sites More sharing options...
NightHunters Posted April 11, 2017 Share Posted April 11, 2017 Indeed sir. I have painted too many hexagons not to drag others down with me! But looking great as always, those death watch shotguns are really growing on me too. What are you planning for the Space shark's eye lenses? Link to comment https://bolterandchainsword.com/topic/240799-crimson-tears-deathwatch-and-inq28-updated-050223/page/28/#findComment-4709096 Share on other sites More sharing options...
Augustus b'Raass Posted April 12, 2017 Share Posted April 12, 2017 Oooh Carcharodon! Will he be getting a jaw-like facial mask or something? Link to comment https://bolterandchainsword.com/topic/240799-crimson-tears-deathwatch-and-inq28-updated-050223/page/28/#findComment-4709619 Share on other sites More sharing options...
Pearson73 Posted April 12, 2017 Share Posted April 12, 2017 The Chaplain and Captain look great; nice use of parts. Liking the colour of the Inquisitor's armour also. Link to comment https://bolterandchainsword.com/topic/240799-crimson-tears-deathwatch-and-inq28-updated-050223/page/28/#findComment-4709627 Share on other sites More sharing options...
Bjorn Firewalker Posted April 12, 2017 Share Posted April 12, 2017 Again, I must compliment your modeling and painting skills, but are those shotguns molded that way? It's stupid to stack the shotshells atop the shotgun, because doing so will obstruct the iron sights. Should I classify this as yet another example of Games Workshop's designers being idiots who EPIC FAIL to design weapons as if real soldiers would wield them in battle? Link to comment https://bolterandchainsword.com/topic/240799-crimson-tears-deathwatch-and-inq28-updated-050223/page/28/#findComment-4709826 Share on other sites More sharing options...
Dantay VI Posted April 12, 2017 Share Posted April 12, 2017 I like the shotgun, rule of cool and all. I also imagine GW's idea is that with the shot discharging over an area would mean that a shotgun is pretty much a point in the general direction and fire type of weapon Link to comment https://bolterandchainsword.com/topic/240799-crimson-tears-deathwatch-and-inq28-updated-050223/page/28/#findComment-4709846 Share on other sites More sharing options...
sockwithaticket Posted April 26, 2017 Author Share Posted April 26, 2017 3 more Deathwatch recruits in what is pretty quick succession for me. Long Easter weekend and a sick day were pretty helpful in that respect.First the finished Carcharodon:I'm really pleased with this one, he looks exactly like I wanted him to, aged and brutal.Angel of Retribution:Another attempt to avoid a mere bolter holding pose, think it's a fairly convincing grenade toss.Storm Warden:deathspecter - I thought you might approve ;) Glad you like them, buddy.Vairocanum - Cheers, man. I've got pads for at least 20 more(!), I think I'll do a group shot after next 3 as that'll be when I run out of my current supply 32mm street bases.Night Hunters - I'm not sure how well the pictures actually show it, but for the lenses I put a coat of gloss varnish over plain black to contrast with the matte black of the armour.Augustus - I wasn't going to do any markings as I tend to keep the Deathwatch armour relatively plain, however your comment made me re-evaluate and I've included a few Maori-ish touches (apparently the swirl in the middle of his knee pad is the symbol for death) and one of the sharks-maw reliefs they seem so fond of (according to their FW transfer sheet at least.Pearson73 - thanks a lot.Bjorn Firewalker - thank you very much. Alas the shells are mounted there by design and I couldn't face the effort of getting rid of them, but I did want a Shotgun with the ][ on it. That said, I'm sort of with dantay_xv in that I'm not entirely sure that obstructing the iron sights on a point and shoot weapon wielded by a super soldier with enhanced vision and whatever targetting stuff is inside the helmet is going to hinder its use. marine7312000, Bjorn Firewalker, Augustus b'Raass and 3 others 6 Back to top Link to comment https://bolterandchainsword.com/topic/240799-crimson-tears-deathwatch-and-inq28-updated-050223/page/28/#findComment-4722402 Share on other sites More sharing options...
deathspectersgt7 Posted April 26, 2017 Share Posted April 26, 2017 These Really look Great . Link to comment https://bolterandchainsword.com/topic/240799-crimson-tears-deathwatch-and-inq28-updated-050223/page/28/#findComment-4722424 Share on other sites More sharing options...
Vairocanum Posted April 27, 2017 Share Posted April 27, 2017 Another batch of great models! I'm happy to hear that there will be at least 20 more . The combi-bolter on the Carcharodon looks really cool, is that a conversion or actual bit? Looking forward to seeing more! Link to comment https://bolterandchainsword.com/topic/240799-crimson-tears-deathwatch-and-inq28-updated-050223/page/28/#findComment-4722606 Share on other sites More sharing options...
sockwithaticket Posted May 11, 2017 Author Share Posted May 11, 2017 And another one, this time from made up chapter the Gryphons Rampant.Intially started as a Golden Griffon, but then I actually checked on them having seen the name and the Chapter symbol is completely different. The stalker is an older version of the Anvil Negotiator rifle. and I broke the preferred barrel so cut it down to just used the tip. Also left the racking (? if that's what you can call it) on the main body to which attachments can be mounted, so this one looks a little different to the other one my Raptor hasAfter abortive attempts to get a convincing left handed firing pose I've tried to make him look like he's adjusting his scope.deathspecter - thanks, brother.Vaironcanum - It's one of Anvil Industry's lance carbines, it looks a lot older than most of the other guns around so it seemed the sort of weapon a Space Shark would plump for while wandering through the armoury. I've got 3 more sitting on my desk in parts at the moment... Vairocanum, baldur27, Biohazard and 3 others 6 Back to top Link to comment https://bolterandchainsword.com/topic/240799-crimson-tears-deathwatch-and-inq28-updated-050223/page/28/#findComment-4738072 Share on other sites More sharing options...
Vairocanum Posted May 12, 2017 Share Posted May 12, 2017 Cool posing, I like the idea of adjusting the scope! I think that the stalker works really well, looking forward to seeing the next member! Link to comment https://bolterandchainsword.com/topic/240799-crimson-tears-deathwatch-and-inq28-updated-050223/page/28/#findComment-4738168 Share on other sites More sharing options...
Biohazard Posted May 12, 2017 Share Posted May 12, 2017 He looks great, really like the posing. Link to comment https://bolterandchainsword.com/topic/240799-crimson-tears-deathwatch-and-inq28-updated-050223/page/28/#findComment-4738284 Share on other sites More sharing options...
marine7312000 Posted May 12, 2017 Share Posted May 12, 2017 The ridges on the side of the gun are picatinny rails. I always love your use of Anvil stuff with the base GW kits. Link to comment https://bolterandchainsword.com/topic/240799-crimson-tears-deathwatch-and-inq28-updated-050223/page/28/#findComment-4738563 Share on other sites More sharing options...
NightHunters Posted May 12, 2017 Share Posted May 12, 2017 Top draw as ever Sock! On the left handed hold, it is strangely simple, once you find the correct right arm, granted have not used Deathwatch arms yet but will see if I can remember and do a little tutorial if you fancy it? All the same the current pose actually looks quite natural and indeed he does seem to be adjusting the scope! Link to comment https://bolterandchainsword.com/topic/240799-crimson-tears-deathwatch-and-inq28-updated-050223/page/28/#findComment-4738968 Share on other sites More sharing options...
sockwithaticket Posted May 23, 2017 Author Share Posted May 23, 2017 Here we go, another step closer to the last of my current Deathwatch ('til I get some more bases in anyway:Trying to get a better shot of the scope lens because I painted it well (if I do say so myself)He belongs to the Revenants of Maccrage who I've made up because I wanted to use this Ultra pad I've had knocking around forever, but not for an Ultramarine and then noticed the similarity with the symbol on the DW:O Ultra's backpack; hey, that's some chapter iconography right there. The idea behind them is that they were founded in honour of those that fell during the Tyrannic War iusing a few Tyrannic War veterans as their basis and are almost solely used to hunt and destroy tyranid hive fleet tendrils that threaten systems that can be saved.Vairocanum, Bio, NightHunters - Cheers, guys. I'm glad the pose works given it's origins as a fix for my botch!Hunters - no worries, mate. I'm using standard marine arms rather than Deathwatch (not a fan of the wrist computer/life support thingy), I just happen to be running quite low, so finding a useful right arm is a little tricky right now and given said shortage there's only so many Im willing to try and cut up to get in a good position before calling it a day and trying something else.marine - cheers, for that, I've learnt my thing for the day. Glad someone else gets kick out of my use of Anvil parts, they're just so fun to integrate, and there're so many of them to play with. Kierdale, deathspectersgt7, Vairocanum and 1 other 4 Back to top Link to comment https://bolterandchainsword.com/topic/240799-crimson-tears-deathwatch-and-inq28-updated-050223/page/28/#findComment-4752379 Share on other sites More sharing options...
Vairocanum Posted May 24, 2017 Share Posted May 24, 2017 Fantastic looking model along with some interesting fluff! The Revenants of Maccrage sounds really cool and I like the pose you've given him! Link to comment https://bolterandchainsword.com/topic/240799-crimson-tears-deathwatch-and-inq28-updated-050223/page/28/#findComment-4752684 Share on other sites More sharing options...
sockwithaticket Posted June 18, 2017 Author Share Posted June 18, 2017 Member number 4 of the Heavy Bolter squad is done:And now that we've got a xenos influx on this here board the Crimson Tears contribute a veteran brother to the Deathwatch:Vairo - Thanks a lot, buddy. I'm pretty pleased with the pose too, goona be exploring some more knife poses in the future. Don't think we see enough marines using their combat blade. deathspectersgt7, Kierdale and Vairocanum 3 Back to top Link to comment https://bolterandchainsword.com/topic/240799-crimson-tears-deathwatch-and-inq28-updated-050223/page/28/#findComment-4788197 Share on other sites More sharing options...
Vairocanum Posted June 19, 2017 Share Posted June 19, 2017 The heavy bolter looks great as usual! The deathwatch is looking good too, looking forward to seeing what the rest of him looks like! I agree that we don't see enough marines with combat blades, I might add some combat blades to my DG when i get back to working on them. Keep up the great work! Link to comment https://bolterandchainsword.com/topic/240799-crimson-tears-deathwatch-and-inq28-updated-050223/page/28/#findComment-4788570 Share on other sites More sharing options...
sockwithaticket Posted June 27, 2017 Author Share Posted June 27, 2017 Deathwatch Crimson Tear finished:The process of awakening one of the Watch's fallen veterans begins:Vairo - Thank you kindly and here you go, saved the fun bit (the sword) 'til last deathspectersgt7, Kierdale, Vairocanum and 1 other 4 Back to top Link to comment https://bolterandchainsword.com/topic/240799-crimson-tears-deathwatch-and-inq28-updated-050223/page/28/#findComment-4799975 Share on other sites More sharing options...
Vairocanum Posted June 28, 2017 Share Posted June 28, 2017 Nice to see him finished, the effect on the power sword looks great! Excited to see the dreadnought, always nice to see some bigger models from you! Link to comment https://bolterandchainsword.com/topic/240799-crimson-tears-deathwatch-and-inq28-updated-050223/page/28/#findComment-4800254 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now