Circus Nurgling Posted July 21, 2012 Author Share Posted July 21, 2012 Latest WIP I suppose it could double for a plague hulk, but it's being loaded out as a stock defiler, without claws. Not sure if I'll add an AC or Heavy Flamer yet, or just utilize the extra attacks. http://i899.photobucket.com/albums/ac197/gfan360/DSCN0357.jpg [edit]would help if I added the photo... Link to comment https://bolterandchainsword.com/topic/250086-apostles-of-contagion-wips/page/2/#findComment-3128373 Share on other sites More sharing options...
Sception Posted July 21, 2012 Share Posted July 21, 2012 I'd hold off on finalizing the defiler conversion until the new book's out. Based on current armament, I'd go for reaper autocannon at least, since you can snap fire it while shooting the battle cannon at the same time. The extra CCWeps aren't quite as attractive now that grenades pose a more serious threat in close combat. But any or all of that could change with the new codex, so... yeah. Link to comment https://bolterandchainsword.com/topic/250086-apostles-of-contagion-wips/page/2/#findComment-3128410 Share on other sites More sharing options...
Circus Nurgling Posted July 21, 2012 Author Share Posted July 21, 2012 Good advice. I'll probably finalize it, but magnetize areas to add in a Reaper AC and Flamer, as well as an area on the back to put on some demolisher shells to indicate ordnance for wysiwyg. Without all that stuff, it's wysiwyg as a Plague Hulk, and I know the equipment for that isn't going to change anytime soon. Given the fluff for a plague hulk states "Plague Hulks are often encountered wielding gigantic cleaver blades or huge rusted flails", I think I may give him a big, rusted flail. Probably my favorite medieval weapon. Link to comment https://bolterandchainsword.com/topic/250086-apostles-of-contagion-wips/page/2/#findComment-3128431 Share on other sites More sharing options...
Ju'kosian Posted July 22, 2012 Share Posted July 22, 2012 what exactly is that you use to build that conversion ? looks like a resin great unclean one, but I'm not sure it's that. looks nice anyway ! Link to comment https://bolterandchainsword.com/topic/250086-apostles-of-contagion-wips/page/2/#findComment-3129029 Share on other sites More sharing options...
Azekai Posted July 22, 2012 Share Posted July 22, 2012 It is an ultraforge greater plague demon, I believe. Link to comment https://bolterandchainsword.com/topic/250086-apostles-of-contagion-wips/page/2/#findComment-3129113 Share on other sites More sharing options...
Circus Nurgling Posted July 24, 2012 Author Share Posted July 24, 2012 It is an ultraforge greater plague demon, I believe. Yes indeedy. It's a crappy recast that I did myself (no vac chamber or pressure pot) so I take no shame in cutting up the legs and converting it to the point it's unrecognizable. I stuck the defiler chassis (minus the legs) directly into the liquid resin while it was in the mold, so this Daemon is literally fused to the engine. I'm thinking about giving it a fly head and replace the CCW with a rusty flail. Link to comment https://bolterandchainsword.com/topic/250086-apostles-of-contagion-wips/page/2/#findComment-3130358 Share on other sites More sharing options...
Circus Nurgling Posted July 28, 2012 Author Share Posted July 28, 2012 Here is my Terminator Sorceror/Lord. I planned the model to have a zombie in it well before the rumour of zombies in the new codex (as they're in the Siege of Vraks campaigns and in Apoc), and zombies fit the fluff of the Apostles of Contagion, but now that they're sure to be in the new 'dex... WOOT! He's about 95% done being converted, with only a bolter/combi-weapon to be added in somewhere... possibly a melta pistol in a holster on his left hip. I dunno. He needs some basing material as well, but here he is. http://i899.photobucket.com/albums/ac197/gfan360/DSCN0416.jpg http://i899.photobucket.com/albums/ac197/gfan360/DSCN0413.jpg Link to comment https://bolterandchainsword.com/topic/250086-apostles-of-contagion-wips/page/2/#findComment-3134476 Share on other sites More sharing options...
Lord Morgrim Posted July 28, 2012 Share Posted July 28, 2012 Awesome sorcerer lord!.....Typhus as the base for the conversion?.....looking really good! Where is the head from? Link to comment https://bolterandchainsword.com/topic/250086-apostles-of-contagion-wips/page/2/#findComment-3135070 Share on other sites More sharing options...
Circus Nurgling Posted July 29, 2012 Author Share Posted July 29, 2012 It's an old-school terminator head. I got finished with a combi-melta scratchbuild to holster on his left hip, magnetized. I'll post a pic here in a bit. All that's left is his right shoulder pad, which I'm still not sure what to do with... Any ideas would help. I like brainstorming. Link to comment https://bolterandchainsword.com/topic/250086-apostles-of-contagion-wips/page/2/#findComment-3135174 Share on other sites More sharing options...
Plague Dave Posted July 29, 2012 Share Posted July 29, 2012 Great looking stuff. For the right shoulder pad, do you have a chapter symbol? Otherwise, how about more heads hanging like the Forgeworld DG Termies, or maybe even a little nurgling sitting up there? Link to comment https://bolterandchainsword.com/topic/250086-apostles-of-contagion-wips/page/2/#findComment-3135212 Share on other sites More sharing options...
Circus Nurgling Posted July 29, 2012 Author Share Posted July 29, 2012 Chapter symbol is a red fly, which is already on his other shoulder. I've thought about heads/skulls, but I'd like something to go underneath them... I've thought about censers, but they're already on his back, so I didn't want the redundancy. A nurgling sitting there isn't a bad idea, but again, I'd like something to actually be on the shoulder guard itself, under the nurgling or trophy skulls. Maybe I'll just do a standard Nurgle symbol, the three circles, or something... Anyhoo, here's the scratchbuilt (sort of) multi-melta bolt-pistol I made today. I tried to emulate some of the older style, wood inlay bolters from back in the day. Wish they would make bits of those... I'd have them on all my PMs. http://i899.photobucket.com/albums/ac197/gfan360/DSCN0419.jpg Link to comment https://bolterandchainsword.com/topic/250086-apostles-of-contagion-wips/page/2/#findComment-3135228 Share on other sites More sharing options...
Circus Nurgling Posted July 30, 2012 Author Share Posted July 30, 2012 Still not quite sure what to do about the shoulder guard, though the woman thought it might be a good idea to have a large maggot coming out of there... which might not be a bad idea (and could count as a familiar if I so desire). I'm thinking a mix of that and the armor being split apart due to his bloating of this appendage: http://i899.photobucket.com/albums/ac197/gfan360/DSCN0420.jpg http://i899.photobucket.com/albums/ac197/gfan360/DSCN0421.jpg Wish my macro worked better... this is as close as I can get without it being so blurry you can't make anything out. There's a pox-mark of nurgle on the outside of his arm, with the existing power-tubing attached directly behind it (modeled to incorporate the existing Typhus model arm), and the skin has ripped apart to show the muscle tissue underneath. I haven't added the fingernails in yet, but made indentions for the nail-bed, to make it easier to add them later. Was fun to sculpt. Here's a crop, hopefully you can pick out some of the detail from the muscle here. It'll come out nicely with some paint, I think. This and my terminators are my vow for the Dark Angels challenge, so paint will be thrown on here pretty quickly. http://i899.photobucket.com/albums/ac197/gfan360/DSCN04202.jpg Link to comment https://bolterandchainsword.com/topic/250086-apostles-of-contagion-wips/page/2/#findComment-3136977 Share on other sites More sharing options...
Dude with a Brush Posted July 31, 2012 Share Posted July 31, 2012 I really like detail you have done with GS like that scythe arm and zombie arm, hopefully paint wont cover it all ;) Link to comment https://bolterandchainsword.com/topic/250086-apostles-of-contagion-wips/page/2/#findComment-3137585 Share on other sites More sharing options...
Circus Nurgling Posted August 15, 2012 Author Share Posted August 15, 2012 Well isn't paint supposed to cover it all though? :) Anyhow, here is the progress on my DA painters challenge thing. Hopefully it'll be done by tomorrow... http://i899.photobucket.com/albums/ac197/gfan360/DSCN0451.jpg Link to comment https://bolterandchainsword.com/topic/250086-apostles-of-contagion-wips/page/2/#findComment-3149130 Share on other sites More sharing options...
Circus Nurgling Posted August 15, 2012 Author Share Posted August 15, 2012 Here they are, more or less done. I'm going to go back and highlight some areas, to get rid of just a bit of the corrosion, touch up some areas, and put a couple more layers on the base (which I'm not happy with so far). I'm closing in on 1500 points painted, though! http://i899.photobucket.com/albums/ac197/gfan360/DSCN0453.jpg http://i899.photobucket.com/albums/ac197/gfan360/DSCN0455.jpg http://i899.photobucket.com/albums/ac197/gfan360/DSCN0456.jpg http://i899.photobucket.com/albums/ac197/gfan360/DSCN0457.jpg http://i899.photobucket.com/albums/ac197/gfan360/DSCN0458.jpg http://i899.photobucket.com/albums/ac197/gfan360/DSCN0459.jpg Link to comment https://bolterandchainsword.com/topic/250086-apostles-of-contagion-wips/page/2/#findComment-3150021 Share on other sites More sharing options...
The Colossus Posted September 9, 2012 Share Posted September 9, 2012 I dunno how I've missed this log, but that termi lord is awesome. Link to comment https://bolterandchainsword.com/topic/250086-apostles-of-contagion-wips/page/2/#findComment-3170991 Share on other sites More sharing options...
Chaeron Posted September 9, 2012 Share Posted September 9, 2012 Really like him! Right arm seems a bit big for my taste? But excellent conversion work. Link to comment https://bolterandchainsword.com/topic/250086-apostles-of-contagion-wips/page/2/#findComment-3171121 Share on other sites More sharing options...
Circus Nurgling Posted September 9, 2012 Author Share Posted September 9, 2012 Thanks. The right arm is supposed to be bloated out, in the same fashion as Necrosius. I'm considering converting that weapon to a stave, since the scythes apparently are axes (and hitting at I1 sucks...). Link to comment https://bolterandchainsword.com/topic/250086-apostles-of-contagion-wips/page/2/#findComment-3171144 Share on other sites More sharing options...
Muskie Posted September 10, 2012 Share Posted September 10, 2012 I think your models are bit too messy. Being Nurgle isn't an excuse to paint sloppily. Look at the whole French Nurgle school. They do a lot of really sophisticated techniques on their 'repulsive' models. Painting sloppily and not thinning your paint enough obscures all the lovely disgusting detail on the Forgeworld Deathguard bits. I've never done the any of the terminators, but I painted some of regular dudes. Let me find the 'French' one. http://farm3.staticflickr.com/2578/4503053167_11cd2de920.jpg Plaguemarine Champion made with Forgeworld bits by Muskie McKay, on Flickr I'm still not happy with the face, getting a sickly orange is tough. I've tried many ways to duplicate a tone I achieved years ago on a single Plaguebearer. One thing I have done is collect a lot of Nurgle applicable painting advice, you can find links to my website below. Good luck on the path of the diseased and decayed. Link to comment https://bolterandchainsword.com/topic/250086-apostles-of-contagion-wips/page/2/#findComment-3171575 Share on other sites More sharing options...
Circus Nurgling Posted September 11, 2012 Author Share Posted September 11, 2012 I think your models are bit too messy. Being Nurgle isn't an excuse to paint sloppily. Look at the whole French Nurgle school. They do a lot of really sophisticated techniques on their 'repulsive' models. Painting sloppily and not thinning your paint enough obscures all the lovely disgusting detail on the Forgeworld Deathguard bits. I've never done the any of the terminators, but I painted some of regular dudes. Let me find the 'French' one. http://farm3.staticflickr.com/2578/4503053167_11cd2de920.jpg Plaguemarine Champion made with Forgeworld bits by Muskie McKay, on Flickr I'm still not happy with the face, getting a sickly orange is tough. I've tried many ways to duplicate a tone I achieved years ago on a single Plaguebearer. One thing I have done is collect a lot of Nurgle applicable painting advice, you can find links to my website below. Good luck on the path of the diseased and decayed. Really not a big fan of yours, a bit too cartoony and clean for my tastes. Also, I couldn't find anything relevant to what I was doing in posts, outside of rust formulae, so I had to make it up as I went along. Here they are, more or less done. I'm going to go back and highlight some areas, to get rid of just a bit of the corrosion, touch up some areas, and put a couple more layers on the base (which I'm not happy with so far). I'm closing in on 1500 points painted, though! As you can see from my previous post, I'm not done with them, so I don't think your 'messy' and 'sloppy' comments are really valid just yet. Link to comment https://bolterandchainsword.com/topic/250086-apostles-of-contagion-wips/page/2/#findComment-3172595 Share on other sites More sharing options...
Circus Nurgling Posted October 20, 2012 Author Share Posted October 20, 2012 Call of Chaos V update: http://i899.photobucket.com/albums/ac197/gfan360/DSCN0556.jpg Everything metal is pinned (which took the majority of the day), along with some minor conversion work (with more to come). Managed to not cut myself at all today! Going to convert the Heavy Bolters into Autocannons for spammy goodness. Two squads worth, so 8 total autocannon Havocs... I need to figure out what I'm going to do for the champs. I may just pull them from other squads. Link to comment https://bolterandchainsword.com/topic/250086-apostles-of-contagion-wips/page/2/#findComment-3213848 Share on other sites More sharing options...
saadeath Posted November 4, 2012 Share Posted November 4, 2012 What did you use for your piping/tubing on your icon bearer? edit: ignore my black templar iconography, I'm not here. Link to comment https://bolterandchainsword.com/topic/250086-apostles-of-contagion-wips/page/2/#findComment-3229033 Share on other sites More sharing options...
Zacco Kathcis Posted November 4, 2012 Share Posted November 4, 2012 Glory to the Plague father, lovely plague marine havocs you have there for the Call of Chaos V, and i think its guitar strings he used for some of the tubing. Really pays of to play the guitar and using worn out strings for 40k goodies ;) Link to comment https://bolterandchainsword.com/topic/250086-apostles-of-contagion-wips/page/2/#findComment-3229119 Share on other sites More sharing options...
Circus Nurgling Posted November 4, 2012 Author Share Posted November 4, 2012 Glory to the Plague father, lovely plague marine havocs you have there for the Call of Chaos V, and i think its guitar strings he used for some of the tubing. Really pays of to play the guitar and using worn out strings for 40k goodies :wallbash: Got a buddy that plays bass and guitar, so I got quite a few strings off him. There's some random wire in there as well. Link to comment https://bolterandchainsword.com/topic/250086-apostles-of-contagion-wips/page/2/#findComment-3229279 Share on other sites More sharing options...
saadeath Posted November 4, 2012 Share Posted November 4, 2012 Glory to the Plague father, lovely plague marine havocs you have there for the Call of Chaos V, and i think its guitar strings he used for some of the tubing. Really pays of to play the guitar and using worn out strings for 40k goodies :whoops: Thanks for the info! I have a friend who plays base so I might bug him when/if i start my plague marine army haha. Link to comment https://bolterandchainsword.com/topic/250086-apostles-of-contagion-wips/page/2/#findComment-3229408 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.