Phoros Posted June 21, 2012 Share Posted June 21, 2012 I'd quite like to make a Fellblade for my army - in particular, a Broadsword - but I'm not sure how to do so. Does anyone have a parts breakdown, or anything? Link to comment https://bolterandchainsword.com/topic/254481-building-a-fellblade/ Share on other sites More sharing options...
Jolemai Posted June 22, 2012 Share Posted June 22, 2012 Whilst I don't know the exact parts, I know the theory. To make that specific Fellblade you need a Baneblade kit and some parts from Machinator's Blood and Skulls Industry. The part(s) you want is the Tank Combo Pack. Then there seems to be some Blood Angels specific bits like the Baal Predator sprue, (or Redeemer/Crusader sprue), etc, but I'm not sure. What I don't know is how he made the Vulkan Mega Bolter barrels. Link to comment https://bolterandchainsword.com/topic/254481-building-a-fellblade/#findComment-3092121 Share on other sites More sharing options...
Phoros Posted June 22, 2012 Author Share Posted June 22, 2012 Hmm. Okay. I'll have to ask his advice on the Inferno Cannon... Link to comment https://bolterandchainsword.com/topic/254481-building-a-fellblade/#findComment-3092212 Share on other sites More sharing options...
Pall Ironbear Posted June 24, 2012 Share Posted June 24, 2012 I can heartily recommend Machinator's kits. Required a bit of flash cleaning, but no more than you'd expect. He has a full wip thread on Warseer if there isn't one on here. You can get the Avenger Gtling guns (Vulknan MBs) from his ebay shop Link to comment https://bolterandchainsword.com/topic/254481-building-a-fellblade/#findComment-3093928 Share on other sites More sharing options...
Machinator Posted June 25, 2012 Share Posted June 25, 2012 Well to build a broadsword fellblade variant like the Blood Angel Sanctimonia Cruor you need: One Baneblade kit One Tank Combo Kit One TL assault cannon from either the Baal predator or the stormraven Two flamestorm cannons from the Land Raider Redeemer For the Vulcan megabolter you can either use the one from the stormlord or you can use my Avenger Gatling Cannons. Everything else are just bits and pieces from a few other kits. Link to comment https://bolterandchainsword.com/topic/254481-building-a-fellblade/#findComment-3095877 Share on other sites More sharing options...
dizzy-xc Posted June 28, 2012 Share Posted June 28, 2012 I can heartily recommend Machinator's kits. Required a bit of flash cleaning, but no more than you'd expect. He has a full wip thread on Warseer if there isn't one on here. You can get the Avenger Gtling guns (Vulknan MBs) from his ebay shop I too recommend Machinators kits. Very durable plastic, high quality, quick shipped. No issues. The pieces fit and looked awesome. Im currently working on a land raider superheavy with machinators pieces... Cant wait to get more time to put up some wip. Link to comment https://bolterandchainsword.com/topic/254481-building-a-fellblade/#findComment-3098496 Share on other sites More sharing options...
Master Barachiel Posted June 28, 2012 Share Posted June 28, 2012 It's also possible to use the bitz of TWO Baneblades (providing you the necessary amount of tracks) and use the other one to build scenery or other great APO things (Me and others in my local store are buildung ships for example). You may think that this is a stupid idea but think about it twice. I could imagine some very fine bunkers or a big Baneblade/Hellhammer emplacement. That's just how I'll start my Fellblade. You can use non-GW bitz of course, too. Link to comment https://bolterandchainsword.com/topic/254481-building-a-fellblade/#findComment-3099449 Share on other sites More sharing options...
Machinator Posted July 18, 2012 Share Posted July 18, 2012 I thought I'd show you guys some new stuff I've been working on. First up is the flamethrower/thermal cannon will actually be sold together in the same kit and will be interchangeable with the weapon mount. The kit will consist of the shrouded mantle, two weapon mounts, and a set each of the flamethrower and thermal cannons. These can be used as a inferno or a magma cannon http://i877.photobucket.com/albums/ab340/machinator248/IMG_2324.jpg http://i877.photobucket.com/albums/ab340/machinator248/IMG_2325.jpg I wasn't quite happy with the first set of nozzles for each and am working on a new set. More to come on that. There's also still quite a bit of detail work needed such as vents and hoses for the weapon shroud but it's coming along. Next up is the plasma cannon that will be integral to the Dark Angels Fellblade when I return to working on that beast. I wanted to give the plasma coils more of a caged glass look so I added the ribs in-between. I also added a few design elements from my Tank Dynamos to the plasma cannon nozzle as the two are meant to go together on the model. I also plan to add a new plasma Tank Engine, which will also go on the DA fellblade. http://i877.photobucket.com/albums/ab340/machinator248/IMG_2328.jpg http://i877.photobucket.com/albums/ab340/machinator248/IMG_2327.jpg http://i877.photobucket.com/albums/ab340/machinator248/IMG_2329.jpg Hopefully I will have these ready to cast in the next couple of weeks. So what do you think? Link to comment https://bolterandchainsword.com/topic/254481-building-a-fellblade/#findComment-3125415 Share on other sites More sharing options...
Phoros Posted July 18, 2012 Author Share Posted July 18, 2012 Hmm. Well, those are very nice, but I was hoping for something a little more like the Warhound Titan's inferno gun for the flamethrower cannon... Sorry. :[ Link to comment https://bolterandchainsword.com/topic/254481-building-a-fellblade/#findComment-3125664 Share on other sites More sharing options...
Phoros Posted August 15, 2012 Author Share Posted August 15, 2012 Okay, so. Since I'm not too fond of Machinator's interpretation of the Inferno Gun, I'd like to consider alternatives, but I'm not sure which would fit best: * Malcador Infernus cannon * Warhound Titan Inferno Gun * Two or more Grey Knight Heavy Incinerators Anyone have any ideas? Link to comment https://bolterandchainsword.com/topic/254481-building-a-fellblade/#findComment-3149790 Share on other sites More sharing options...
Machinator Posted August 18, 2012 Share Posted August 18, 2012 I think something along the lines of the Malacdor infernus cannon would look best with just a two tube design and a single cowling over the end. The Warhound version would be a little too wide with the tri-barrels and the incinerators or flamestorm cannons would just be too small as a main turret weapon. Hmmmm, this gives me an idea.... Link to comment https://bolterandchainsword.com/topic/254481-building-a-fellblade/#findComment-3152053 Share on other sites More sharing options...
Circus Nurgling Posted August 20, 2012 Share Posted August 20, 2012 I have the warhound inferno cannon and a baneblade in front of me here. They don't look bad together. I can post a pic if you like. Also, I highly recommend at least getting a track set (Liberator 1.0) from Machinator. Fellblades just don't look right to me with the current treads. The engine upgrade is a good investment, as well. Can't speak for the tank set, as I don't have those turrets. Link to comment https://bolterandchainsword.com/topic/254481-building-a-fellblade/#findComment-3154017 Share on other sites More sharing options...
Montuhotep Posted August 21, 2012 Share Posted August 21, 2012 The Warhound version would be a little too wide with the tri-barrels Unless you'd consider mounting the whole shebang as a fixed weapon in a Shadowsword's citadel - then the width would be perfect, I imagine. Link to comment https://bolterandchainsword.com/topic/254481-building-a-fellblade/#findComment-3154605 Share on other sites More sharing options...
Gertjan Posted August 24, 2012 Share Posted August 24, 2012 I can't recall where it was but wasn't there a photoshop of a sister superheavy which had a battery of LR redeemer flamers int he turret, that might be a decent idea. Link to comment https://bolterandchainsword.com/topic/254481-building-a-fellblade/#findComment-3156979 Share on other sites More sharing options...
Machinator Posted March 24, 2013 Share Posted March 24, 2013 So I did finally get around to finishing these parts. Behold! The Ignitus tank! http://i877.photobucket.com/albums/ab340/machinator248/IMG_2521_zps2dee3a03.jpg http://i877.photobucket.com/albums/ab340/machinator248/IMG_2522_zps53b18e66.jpg http://i877.photobucket.com/albums/ab340/machinator248/IMG_2523_zps61e2e272.jpg http://i877.photobucket.com/albums/ab340/machinator248/IMG_2524_zpsf8710556.jpg http://i877.photobucket.com/albums/ab340/machinator248/IMG_2525_zpsb4e7e27a.jpg http://i877.photobucket.com/albums/ab340/machinator248/IMG_2526_zps5cf9a612.jpg http://i877.photobucket.com/albums/ab340/machinator248/IMG_2527_zps9f02de79.jpg The main weapon has a swappable flamethrower and thermal cannon piece held in place by magnets that allows you to switch barrels out very easily. http://i877.photobucket.com/albums/ab340/machinator248/IMG_2528_zps77faf938.jpg http://i877.photobucket.com/albums/ab340/machinator248/IMG_2529_zps8f9452c2.jpg Link to comment https://bolterandchainsword.com/topic/254481-building-a-fellblade/#findComment-3334496 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.