AngelVeto Posted January 29, 2013 Share Posted January 29, 2013 I was thinking of using some of the DV bikes I have and trying to convert them to black knights, as I'm not a fan of a 50$ tag for three bikes when I want 6 of them. What do you guys think about using plasma pistols in place of bolters to act as the talons? Link to comment https://bolterandchainsword.com/topic/270364-converting-some-black-knights/ Share on other sites More sharing options...
GlauG Posted January 29, 2013 Share Posted January 29, 2013 I've done it, it looks fine. :) I am on my phone so it's hard to link my revived army thread but it's in this very forum... Edit: http://www.bolterandchainsword.com/topic/270249-resurrecting-my-dark-angels/?do=findComment&comment=3292253 this thread, bottom pic. I will take better pics when I am home. Link to comment https://bolterandchainsword.com/topic/270364-converting-some-black-knights/#findComment-3293363 Share on other sites More sharing options...
lhg033 Posted January 29, 2013 Share Posted January 29, 2013 i was wondering how easy it'll be to use the grenade front on a standard bike as i have several of these yet to build that could be 'upgraded'. if so it makes the cost a bit less steep if you can do the same. Link to comment https://bolterandchainsword.com/topic/270364-converting-some-black-knights/#findComment-3293403 Share on other sites More sharing options...
Jack Hitchcock Posted January 29, 2013 Share Posted January 29, 2013 I'm going to do the same thing... my trouble is: what are you goint to use to represent the corvus hammers? Link to comment https://bolterandchainsword.com/topic/270364-converting-some-black-knights/#findComment-3293418 Share on other sites More sharing options...
Pyro X Posted January 29, 2013 Share Posted January 29, 2013 the hammers arn't to bad, I piced up some on ebay for about 1.50 per hammer. else you could always take some thunder hammers, cut off one part drill in the side you've cut off then stick a part of a thin nail or tooth pick in it. after that green stuff it a little bit for the correct shape. Link to comment https://bolterandchainsword.com/topic/270364-converting-some-black-knights/#findComment-3293500 Share on other sites More sharing options...
EPK Posted January 29, 2013 Share Posted January 29, 2013 I'm going to do the same thing... my trouble is: what are you goint to use to represent the corvus hammers? You could always get away with not showing the corvus hammers on any of the models as well as they are all stock (just like you don't show a bolt pistol on everyone). As for making plasma talons (and grenade launchers), please see here - http://indexastartes.blogspot.co.uk/2013/01/plasma-talon-conversions-from-dark.html Link to comment https://bolterandchainsword.com/topic/270364-converting-some-black-knights/#findComment-3293636 Share on other sites More sharing options...
Polythemus Posted January 29, 2013 Share Posted January 29, 2013 Ifyou are thrifty like me, you could consider not modeling the hammer since its included in the wargear description as standard. Edit ninja'd by epk! Who by the way has an awesome tutorial on conversion, great work if its yours. Great find if its not! Link to comment https://bolterandchainsword.com/topic/270364-converting-some-black-knights/#findComment-3293637 Share on other sites More sharing options...
natsirtm Posted January 29, 2013 Share Posted January 29, 2013 I am also converting my black knights with plasma pistols. I am trimming off a rectangular piece of the pistol and gluing it on top of the bolter body. You can see my conversions on my blog here. For my corvus hammers I am planning to use the pick accessory from the leman russ kit, with a bit of conversion work. Link to comment https://bolterandchainsword.com/topic/270364-converting-some-black-knights/#findComment-3293660 Share on other sites More sharing options...
GlauG Posted January 29, 2013 Share Posted January 29, 2013 Darn, I regret my laziness now, I should have done what the article did and kept the plasma coils! Thanks for the link though EPK. :) Link to comment https://bolterandchainsword.com/topic/270364-converting-some-black-knights/#findComment-3293663 Share on other sites More sharing options...
Jack Hitchcock Posted January 29, 2013 Share Posted January 29, 2013 The hammers arn't to bad, I piced up some on ebay for about 1.50 perhammer. else you could always take some thunder hammers, cut off one part drill in the side you've cut off then stick a part of a thin nail or tooth pick in it. after that green stuff it a little bit for the correct shape. 1.5 pound or euro? However not so cheap if you need some... Probably thunder hammer are even more expensive! XD You could always get away with not showing the corvus hammers on any ofthe models as well as they are all stock (just like you don't show a bolt pistol on everyone). I know... but I don't like this option, they are "cute" with corvus hammers! Link to comment https://bolterandchainsword.com/topic/270364-converting-some-black-knights/#findComment-3293705 Share on other sites More sharing options...
GlauG Posted January 30, 2013 Share Posted January 30, 2013 So, in response to realising my Plasma Talons lacked induction coils, I knocked these out; http://img543.imageshack.us/img543/7569/20130130002421.jpg Just a little GS work, and repositioning of the pistol parts, but I think it makes a lot of difference! As for hammers, I think I might be using some of the Chaos Warrior ones which have the spiked/clawed back... Link to comment https://bolterandchainsword.com/topic/270364-converting-some-black-knights/#findComment-3294019 Share on other sites More sharing options...
Ronin_eX Posted January 30, 2013 Share Posted January 30, 2013 Hmm, I may actually do this (I have a spare RWAS from DV incoming but since I already have only full RAS in my standing force they would be remainders). The only downside is that I am really fond of the RT-beakie style bacinet helmets on the Black Knights. Have to check the instructions, can't remember if head swaps will be a pain on these guys. But I'll see how I feel when a get them. I may just stay the course and use Black Knight boxes all the way. I don't even remember if I have enough plasma pistols either. Link to comment https://bolterandchainsword.com/topic/270364-converting-some-black-knights/#findComment-3294116 Share on other sites More sharing options...
GlauG Posted January 30, 2013 Share Posted January 30, 2013 If you buy a single Black Knight box, it has enough Beakie heads for something like 7 Bikers? Link to comment https://bolterandchainsword.com/topic/270364-converting-some-black-knights/#findComment-3294239 Share on other sites More sharing options...
facmanpob Posted January 30, 2013 Share Posted January 30, 2013 Oh I say! I do like the GS'd talons - very good work, brother! :tu: Link to comment https://bolterandchainsword.com/topic/270364-converting-some-black-knights/#findComment-3294325 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.