Jump to content

Left handen Thunder Hammer?


Astoran

Recommended Posts

Hi guys. I'm looking for a left handed thunder hammer to replace the frost axe on the Thunder Lord kit. I intend to cut the axe hand off at the wrist to be able to keep the axe and use it on another model. But I cant seem to find a single power armour thunder hammer. Do any of you have any tip as to were I can find one?

/Regards, Redbeard

Link to comment
https://bolterandchainsword.com/topic/281965-left-handen-thunder-hammer/
Share on other sites

Vanguard Veteran kits now come with power armor thunder hammers. If you don't want to buy the box maybe another marine player will trade or give up one of the thunder hammers. There are also the finecast ones but they don't work well for conversions because of cables.

Thanks for the tips. The Vanguard ones are both right handed I'm afraid and the metal ones are... well, made of metal so I dunno how well I can make em stick.

I might just pick up a box of Vanguards and switch out the hand if I run out of options. 

Umm, just find a left handed sword/axe/something arm with hand, and do some chopping of the hammer onto the arm. ?

 

As for metal onto plastic - just use superglue :)  But of course, follow safety rules by not sticking your fingers and clothing together etc :P

Thanks for the tips. The Vanguard ones are both right handed I'm afraid and the metal ones are... well, made of metal so I dunno how well I can make em stick.

I might just pick up a box of Vanguards and switch out the hand if I run out of options. 

 

It's easy enough to remove the part of the hammer above the hand and make it left handed, especially if you have an axe handle thats lefty somewhere. Otherwise it's all metal or finecast parts floating around in some lost corner.

I'm not entirely sure where the discussion of metal came from - the ones Bulweih linked are finecast.

 

Anyway, if you don't want to swap out weapon hafts due to breakage risks, you're prettymuch limited to swapping the entire arm (in which case you'll need one of the finecast hammers) or swapping the head of the weapon (which still carries a breakage risk, but not as severe)

Hyá brother,

those are the ones that come to mind:

http://www.games-workshop.com/gws/catalog/productDetail.jsp?catId=cat440277a&prodId=prod1710026a

 

 

Plus, of course the new ones mentioned by our cousin above.

 

Redbeard, I've got three of these old ones in metal that I don't need.  Send me a PM if you want one.  Attaching to plastic is easy via the "pinning" technique.  I can explain it, or you can do a search on Youtube for examples/descriptions on how to easily pin the shoulder joints using a small bit of a paperclip and some superglue.

 

Valerian

I realise I did not use my eyes properly. The linked ones are indeed finecast. I might just order a set of thoose.

Again thank you for all the responses, this is truly a helpful community.

Special thank to you Valerian for offering to send me a hammer, I dont think it will be necassary thou :-)

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.