Jump to content

The Ground Will Tremble... (a Chaos Knight WIP) Updated 1/7


Clone

Recommended Posts

Hello fellow Lords, Sorcerers, Champions and Daemonic beings of all kinds.

With the advent of 7th edition and the changing of the allies matrix I have taken it upon myself to create a Chaos Knight. I was going to start a Traitor Guard force so I could ally in one of these beasts but now I don't have to go that route (they're both Come the Apocalypse and its cheaper buying a Knight than a whole IG force).

I have ordered a ton of bits and a leviathan mauler claw from dreamforge gaming. My basic plan is to make a Knight Errant with a Power Claw and bedecked with chains, skulls, 8 pointed stars and spikes (its not chaos till its got spikes on it msn-wink.gif). I haven't settled on a colour scheme yet but I have been flirting with the idea of a Mechanicum Knight that joined Legio Mortis and so followed the Legio when they sided with Horus during the Heresy. This would mean I am looking at predominantly red and black but with some white thrown in too. There is a large skull on the transfer sheet that comes with the Knight which would fit in with the Legio Mortis theme.

Here is the base so far:

http://i1282.photobucket.com/albums/a521/ralphgeddes/64ac1b9a-59be-4441-b568-0bc20775d13e_zps3d48c65d.jpg

http://i1282.photobucket.com/albums/a521/ralphgeddes/4185416d-cc32-43b1-b604-f982eec902f1_zpscd7af27a.jpg

I had an old Rhino that I hacked apart and then smashed (by my steel toe cap boots no less) so it would look like the Knight has just been stomping loyalist face. I had to strategically place some more wreckage to support the pose as it first looked a little wonky, then I had to cut the left leg along the knee joint so I could pose it accordingly:

http://i1282.photobucket.com/albums/a521/ralphgeddes/e6596c72-3574-448a-a386-9643f1f4c091_zps6e02c942.jpg

So far so good.

Thanks for all the good feedback guys.

 

The 15mm scale leviathan looked a little too small to match up weapons with a knight (it's close to dread knight scale) so I opted for the 28mm scale claw. I'll see how it goes but I always think that a power fist should be oversized, looks more menacing.

 

I'll try a fit in a squashed marine or two. Maybe have one hanging out the wreckage. Nice.

Oh my Chaos Gods!! I can't wait to see how this goes!!! :D Been considering getting one of these and doing the same, even had similar ideas for the base but could not convince myself as there is not much precedent for it and it's a big investment. Like I would hate to get it wrong, it's such a massive modelling opportunity I would want to do it justice.

 

I'm really looking forward to seeing how this goes though. It could be what convinces me to take the plunge. Loving it so far though. No Pressure... Haha ;)

Well, I got carried away. I was supposed to take it slow and post step by step photos of how I made this but I couldn't help myself. Once I got in the zone, I had to keep going. Still needs some work, filing down areas, added chaos bits, etc, but this is what he looks like so far:

 

http://i1282.photobucket.com/albums/a521/ralphgeddes/f06997b0-12f0-49a1-8455-acba12cfd5fb_zps32853bc1.jpg

 

I filied down the mask completely so it looks like an actual skull, even cut away the mouth grill to give it some spikey teeth. I think the claw matches up pretty well and fits what I had in my mind, I think the 15mm scale claw would've looked too small so I'm pretty happy. I will add some more pipes and pistons to where the claw meets with the shoulder joint to give the look of added strength. The thermal and battle cannons are also magentised so I can interchange them between battles. Just need to wait my bits to arrive so I can get painting!

 

Just need to give the guy a name!

Looks awesome. I built three Chaos Knights myself - but mine are basically regular Knights with the eagles etc replaced with some spikes. I have nowhere near the talent on display in the OP. :)

 

I will say that one of the Knight faces is spectacularly close to the Iron Warriors logo, though. :D Check it out!

 

http://i.gyazo.com/105bad66df9b2ad897b399d71db1a267.png

 

http://i.gyazo.com/b223790d00745a0a73aa3a16af6c36f2.png

Another view:

http://i1282.photobucket.com/albums/a521/ralphgeddes/db65ac63-f702-487d-95e3-262c8d03ad62_zps3130bf6b.jpg

And the Battle Cannon:

http://i1282.photobucket.com/albums/a521/ralphgeddes/9d07255c-15e6-4265-a6b1-3170de3bba4e_zps0282a3c4.jpg

Just like to point out that I've been getting a few frowns and sideways looks from the wife while I've been carefully posing my Knight. I'm sure it doesn't help that I've been calling it a "him" and "Knightykins" biggrin.png

EDIT: Nice Knights Shifte! I like the Iron Warriors scheme.

EDIT Again: @HJL its the Leviathan Mauler Claw from Dreamforge Games.

I will be painting this beast but I'm still waiting for my bits order to arrive so I won't start painting just yet.

 

I'm considering glueing the arms in place. They are posable at the moment but they tend to flop about when I move the knight, especially the claw as it's quite heavy. What do you guys think?

Very nice work so far! I think maybe the pose needs a little adjusting maybe? A little more weight and lean of the body section onto its left leg (the one crushing the rhino)....I don't know I think that may just work?

 

Other than that its cracking! LOVING THE CLAW!

 

BCC

I turned the torso slighty so its looming over the rhino. Excuse the camera flash!

 

http://i1282.photobucket.com/albums/a521/ralphgeddes/05a7516d-0ebe-4c9c-8873-8c3ffd4affb3_zps8e573175.jpg

 

http://i1282.photobucket.com/albums/a521/ralphgeddes/3c82fc37-f434-43c5-9297-9e92c2657858_zps44de1d41.jpg

 

Better or worse?

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.