rye0006 Posted June 21, 2015 Share Posted June 21, 2015 I'm starting a small Inquisitorial detachment to support my Black Templars Crusade. The fluff is going to say that the inquisitors are from different ordos, but are united by blood, all brothers. At the moment it's only going to be two inquisitors (one melee and one ranged) and a ranged unit comprising of 3 plasma cannon servitors and two jokaero weaponsmiths. Tertius Court is an Ordo Xenos inquisitor, armed with a power sword, needle pistol, and rad and psychotroke grenades. He's based on an old Mordheim witch hunter model. I'd painted this model years ago, intending to use it on a diorama of a witch burnt at the stake that I never got around to doing. I think he's just perfect as an inquisitor. It took a while to strip the paint from him, but then I forgot to take a picture of him just undercoated, so you can see a sneak glimpse of the colour scheme in going for - purple and gold. http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20150621_183021_zpsxwrakjm0.jpg Quartus Court is an Ordo Malleus inquisitor, armed with a hellrifle and incinerator. He's based on a warhammer empire engineer, with a dwarf gyrocopter pilot helmet and irondrake pistol arm. http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20150507_220528_zpsdaykbazx.jpg http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20150507_220509_zpsbovhfqza.jpg The 3 plasma cannon servitors are all cobbled together from different pieces. The orb servitor is made from a small bouncy ball with lots of random bits glued all over. http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20150523_161645_zpszatkv27w.jpg http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20150523_161656_zpsosxrrnrr.jpg The droid servitor is made from the space marine tank sprue, a skeleton head, arm from Grimm Burlocksson, and bits from a drop pod. http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20150523_161734_zpsejfjt4a4.jpg http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20150523_161746_zpse6aetalw.jpg The ogryn servitor is made from a warhammer ogre and ork nob buzz saw. The head is from the avatars of war dwarf berserkers kit, meant for a banner pole I just loved the idea of having the tongue lolling out to one side next to a cable. http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20150523_161558_zpswfoofqcj.jpg http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20150523_161614_zpsnlhyvif0.jpg My two jokaeros are fairly standard models - one's the games workshop official model and the second is from reaper miniatures. I've modeled the second, which comes holding onto a pole, to look like it's swinging from a fence/wall support strut. http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20150621_183611_zpsqw9lssdk.jpg http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20150621_183554_zpsbdvprinv.jpg I've started painting, so more pictures will follow in due course. Link to comment https://bolterandchainsword.com/topic/309782-the-court-brothers-inquisitorial-detachment/ Share on other sites More sharing options...
rye0006 Posted June 23, 2015 Author Share Posted June 23, 2015 I've got a battle on Friday night and am looking to run my inquisition detachment with my Crusade. If I take an inquisitor with the liber heresius and deploy him with the emperor's champion, and a crusader squad in their dedicated land raider crusader, can I then use the scout move that the liber grants to scout up the land raider with everyone inside? Link to comment https://bolterandchainsword.com/topic/309782-the-court-brothers-inquisitorial-detachment/#findComment-4099870 Share on other sites More sharing options...
Nicodemus Doloroso Posted June 24, 2015 Share Posted June 24, 2015 Very original and imaginative warband you're constructing there -- looking forward to seeing them painted. I think the inquisitor needs to be deployed with the crusader squad inside their land raider in order for them to scout. But I'd have to double check the codex. I will try to do that later today. Link to comment https://bolterandchainsword.com/topic/309782-the-court-brothers-inquisitorial-detachment/#findComment-4100941 Share on other sites More sharing options...
rye0006 Posted June 25, 2015 Author Share Posted June 25, 2015 I've finished the first plasma cannon servitor - the floating orb. I'm rather pleased with this; I wasn't sure how to paint the orb originally, but then a friend suggested I try to make it look like marble. Purple is the theme color for my detachment so purple marble was what I went for - and I think it looks awesome! It's not just the marbling though, I just love the crazy futuristic contraption idea of it all. What do you guys think? http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20150625_212228_zpspc49zbne.jpg http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20150625_212239_zpsxrdxaezk.jpg http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20150625_212254_zpskqvnmeur.jpg Link to comment https://bolterandchainsword.com/topic/309782-the-court-brothers-inquisitorial-detachment/#findComment-4102867 Share on other sites More sharing options...
sedibear Posted June 25, 2015 Share Posted June 25, 2015 I like it! I'd grease up the metal parts more (nuln oil, drybrush necron compound, agrax, drybrush necron compound again) but that's a personal preference. The marble-y look is nice! Link to comment https://bolterandchainsword.com/topic/309782-the-court-brothers-inquisitorial-detachment/#findComment-4102935 Share on other sites More sharing options...
Duke Danse Macabre Posted July 24, 2015 Share Posted July 24, 2015 I think the xenos inquisitor may work better as the ranged one as he would be with the xenos. ;) Some good ideas there mate so far, must admit though, I'm not a fan of the bouncy ball of doom... Kinda reminds me about dungeons and dragons. :P Link to comment https://bolterandchainsword.com/topic/309782-the-court-brothers-inquisitorial-detachment/#findComment-4127153 Share on other sites More sharing options...
KRG-23 Posted August 5, 2015 Share Posted August 5, 2015 Bold and daring conversions here, I like the fluff. Hoping to see some more soon ! Link to comment https://bolterandchainsword.com/topic/309782-the-court-brothers-inquisitorial-detachment/#findComment-4138315 Share on other sites More sharing options...
Sororita Katya Posted August 6, 2015 Share Posted August 6, 2015 Very cool and unique servitor options! I had my doubts about the bouncy ball, but seeing it done I like it! Although I did perceive it to be like one of those electric orb balls that when you put your finger on it, all the strands of electricity go to your finger, then I read the marble statement and got slightly disheartened :P but still really like it :D Can't wait to see the rest done up, they match my Sororitas paint scheme too ^_* Link to comment https://bolterandchainsword.com/topic/309782-the-court-brothers-inquisitorial-detachment/#findComment-4139339 Share on other sites More sharing options...
nismogrendel Posted August 26, 2015 Share Posted August 26, 2015 Bouncy ball servitor is awesome, looks like the robots from Fallout :) Link to comment https://bolterandchainsword.com/topic/309782-the-court-brothers-inquisitorial-detachment/#findComment-4156375 Share on other sites More sharing options...
rye0006 Posted September 13, 2015 Author Share Posted September 13, 2015 Introducing Inquisitor Secundus Court, joining his younger brothers Tertius and Quartus. Secundus will be run as a counts-as Coteaz, hence the large hammer and the animal companion. http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20150913_120348_zpsg4cd7vos.jpg http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20150913_120408_zpssymxhebw.jpg http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20150913_120426_zpsdhxijoku.jpg http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20150913_120442_zpsdixyyswh.jpg He's made from various sources - space wolf legs, back torso and head, khorne bezerker front torso, dwarf hammerers arms and hammer, ravenwing bolt pistol, and ad mech back pack. When modeling him I was trying to think of what I could use to represent Coteaz's psyber-eagle, but couldn't come up with anything from my bits box. However, I then remembered a very old boar from a savage orc model I had as a kid. I think this gives a really nice element to Secundus' character - gruff and determined. And the boar nice and significant for me - it's the sigil of the school I work at. As you can see, I'm in the process of stripping the old paint, which is going very slowly as it was very thick coats! (I was not a good painter when I was 12!) I don't think I'm going to be able to get it all off, but hopefully I can scrape off enough to recover some of the texture. The boar had lost its tail, so I'll need to do a bit of repairing there anyway. I've also made a contingent of 4 daemonhosts. I know they are not especially effective in the game owing to their random nature, but they just fit my idea of the inquisition - using the powers of the enemy against themselves. Though if anyone has some good ideas on how to get good use from daemonhosts, please share! In the meantime, please meet 'The Staked'. http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20150913_120554_zpso1hyhzih.jpg http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20150913_120619_zpsad8e2aqt.jpg http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20150913_120651_zpsmt90rsxs.jpg http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20150913_120734_zpsscmwegyv.jpg The base models of these 4 are the zombies pulling the vampire counts corpse cart, 1 has got the head from the free WD sigmarine, another uses a severed orc head from a dwarf kit. I've put bits of guitar wire or twisted kitchen roll to show the restraints that are used to confine them when not needed. I quite like the chaotic nature of these models and hopefully they'll make quite a fun unit to play with. I'm currently thinking of running them all together with a ministorum priest as an escort for their lost souls. I've made two priest models, but again they are currently soaking in dettol to try and remove some of the old thick paint job. Hopefully I'll be able to share some pictures of them before too long. I should also do some painting, because I haven't made any more progress on Tertius, Quartus, or the plasma cannon servitors than my last post! Link to comment https://bolterandchainsword.com/topic/309782-the-court-brothers-inquisitorial-detachment/#findComment-4170477 Share on other sites More sharing options...
Inquisitor Eisenhorn Posted September 16, 2015 Share Posted September 16, 2015 What is going on here........keep it up. Link to comment https://bolterandchainsword.com/topic/309782-the-court-brothers-inquisitorial-detachment/#findComment-4172821 Share on other sites More sharing options...
rye0006 Posted September 19, 2015 Author Share Posted September 19, 2015 Finished the other two plasma cannon servitors. Really happy with how they have turned out. http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20150919_181816_zpsfjj2nocw.jpg http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20150919_181937_zpsl7wyeh1e.jpg http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20150919_181833_zpsiunvs6jz.jpg http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20150919_181849_zpsj6kdorvt.jpg http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20150919_181909_zpssagwajks.jpg Link to comment https://bolterandchainsword.com/topic/309782-the-court-brothers-inquisitorial-detachment/#findComment-4176054 Share on other sites More sharing options...
JaM_TW Posted September 24, 2015 Share Posted September 24, 2015 Very... disturbing! Nice... Link to comment https://bolterandchainsword.com/topic/309782-the-court-brothers-inquisitorial-detachment/#findComment-4179886 Share on other sites More sharing options...
rye0006 Posted October 10, 2015 Author Share Posted October 10, 2015 Whilst I'm very slow at painting, I do enjoy a quick bit of modelling. With the plasma cannon servitors done, I'm looking at some multi melta ones now, and want to keep the same sort of vibe going with the models - not the gw human with a melta arm and pipes. So this is my latest offering - a monowheel servitor. It's mainly the rear half of the dwarf gyrocopter, upside down, with a wooden bead as the wheel, a mechanicus head and gun shield, and obviously a multi melta. What do you guys think? http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20151010_165613_zps75recjub.jpg http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20151010_165626_zpsrxah4jga.jpg http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20151010_165638_zpsya7wdxda.jpg Link to comment https://bolterandchainsword.com/topic/309782-the-court-brothers-inquisitorial-detachment/#findComment-4193502 Share on other sites More sharing options...
Isiah Posted October 18, 2015 Share Posted October 18, 2015 All very creative. Keep it coming :) Link to comment https://bolterandchainsword.com/topic/309782-the-court-brothers-inquisitorial-detachment/#findComment-4200115 Share on other sites More sharing options...
rye0006 Posted December 13, 2015 Author Share Posted December 13, 2015 I've cobbled together another multi-melta servitor. I do enjoy the craziness of servitors! http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20151213_162523_zpsnlpzzdm3.jpg http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20151213_162556_zpsx4afdfvy.jpg Link to comment https://bolterandchainsword.com/topic/309782-the-court-brothers-inquisitorial-detachment/#findComment-4250957 Share on other sites More sharing options...
Nicodemus Doloroso Posted December 16, 2015 Share Posted December 16, 2015 I love your counts-as Coteaz. Very original take on the character. I also like your DIY servitors -- a lot more interesting than the GW models. Link to comment https://bolterandchainsword.com/topic/309782-the-court-brothers-inquisitorial-detachment/#findComment-4253940 Share on other sites More sharing options...
rye0006 Posted January 21, 2016 Author Share Posted January 21, 2016 I've painted one of my jokaero weaponsmiths, largely because I wasn't sure how to paint an orangutan. I think it's come out OK, bit what do you guys think? http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20160121_200910_zpsc18527s6.jpg http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20160121_200940_zpsl6qjdi0p.jpg Link to comment https://bolterandchainsword.com/topic/309782-the-court-brothers-inquisitorial-detachment/#findComment-4281164 Share on other sites More sharing options...
Isiah Posted January 23, 2016 Share Posted January 23, 2016 Looks pretty awesome, very dynamic. I'm glad he's not a bright orange too :tu: Cheers I Link to comment https://bolterandchainsword.com/topic/309782-the-court-brothers-inquisitorial-detachment/#findComment-4282720 Share on other sites More sharing options...
rye0006 Posted January 31, 2016 Author Share Posted January 31, 2016 Cobbled together another multi-melta servitor. It's not amazingly adventurous, but has a bit of character. Body and upper legs are from the free white dwarf sigmarine model. It's right leg is from a terminator (wanted to change its height a bit) and its left peg-leg is from the dwarf gyrocopter. Head is from the khorne berserkers kit. http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20160131_211157_zpsvxnnvotm.jpg http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20160131_211234_zpsxyl0bmyv.jpg http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20160131_211211_zpsx1of7af6.jpg Link to comment https://bolterandchainsword.com/topic/309782-the-court-brothers-inquisitorial-detachment/#findComment-4290436 Share on other sites More sharing options...
Isiah Posted February 2, 2016 Share Posted February 2, 2016 ... he looks like a 40K pirate ... needs a parrot on his shoulder (or servo-skull). ;) Very creative. Cheers I Link to comment https://bolterandchainsword.com/topic/309782-the-court-brothers-inquisitorial-detachment/#findComment-4292250 Share on other sites More sharing options...
Epimetheus13 Posted February 14, 2016 Share Posted February 14, 2016 Fantastic conversions. Getting a real BB-88 vibe from the monowheel multimelta servitor! Keep it up! Love how the lack of easily obtainable official models leads INQ players to do so much creative converting. It's the best reason to collect an INQ force. Link to comment https://bolterandchainsword.com/topic/309782-the-court-brothers-inquisitorial-detachment/#findComment-4306113 Share on other sites More sharing options...
rye0006 Posted October 21, 2016 Author Share Posted October 21, 2016 Anvil industry have released a new werewolf model with choice of parts to make it either fantasy or sci-fi; it looks seriously cool so I bought 2. I've changed a hand on each of them using bits from my bits box to make them a bit more individual. Not sure whether to use them as Arco-flagellants or deathcult assassins, but either way, the Court brothers have gained some interesting new recruits. http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20161021_113321_zpsjpubzf8v.jpg http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20161021_113343_zpsbttbqcfc.jpg http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20161021_113403_zpsqqnaq7ev.jpg http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20161021_113418_zpsnjxkkttg.jpg Link to comment https://bolterandchainsword.com/topic/309782-the-court-brothers-inquisitorial-detachment/#findComment-4539330 Share on other sites More sharing options...
Inquisitor Fox Posted October 21, 2016 Share Posted October 21, 2016 You know, you could take a 2nd Henchmen unit of JUST Daemonhosts... that way their randomness won't mess up not them and you can use them as an secondary warband to your shooting warband. :) Link to comment https://bolterandchainsword.com/topic/309782-the-court-brothers-inquisitorial-detachment/#findComment-4540064 Share on other sites More sharing options...
rye0006 Posted October 28, 2016 Author Share Posted October 28, 2016 I finished doing a bit of painting tonight for one of my fantasy armies, and got thinking about psykers for my inquisition detachment. I have one modeled already, but ideally want 1 in each squad, so need so other models. I want my psykers to look odd and outside of society, so I started fiddling with a few things in my bits box. I quite like this 'wild' man. http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20161028_214459_zps1ebipm1r.jpg http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20161028_214526_zpsuupdslx1.jpg http://i296.photobucket.com/albums/mm195/John_Rye/Mobile%20Uploads/IMG_20161028_214538_zpsulesgnlo.jpg Link to comment https://bolterandchainsword.com/topic/309782-the-court-brothers-inquisitorial-detachment/#findComment-4547146 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.