Dantay VI Posted June 22, 2016 Share Posted June 22, 2016 If you want a bit more control to do finer highlights, lower the psi and move closer in, it will narrow the spray arc and not fire the paint all over the place because of the over pressure. The only issue I have found is tat I get a bit more clogging so regular cleaning is required. Not sure if his is my fault or just a part of airbrushing. http://www.bolterandchainsword.com/topic/322393-etl-v-tips-master-thread/?p=4415842 This is the link to the airbrushing stuff. WGC have some really good tips and buypainted does TWC like Timberwolves I think. he only downside to his tutorials is that he doesn't mention pressures for the airbrush and sometimes he does not use GW colours. Which paints are you using out of curiosity? Link to comment https://bolterandchainsword.com/topic/317324-muffins-progress-blog/page/2/#findComment-4425865 Share on other sites More sharing options...
lovesmuffins Posted June 22, 2016 Author Share Posted June 22, 2016 Right now all I have are gw paints that I'm thinning down to get through the air brush. I'm looking at a few other companies. lucky for me I am very good friends with a guy that does commissions and has some close ties with some members of the industry so he usually has some good tips and suggestions Link to comment https://bolterandchainsword.com/topic/317324-muffins-progress-blog/page/2/#findComment-4425872 Share on other sites More sharing options...
Dantay VI Posted June 22, 2016 Share Posted June 22, 2016 Out of curiosity, how much do you thin them down? I am using GW air paints, but I have a lot of standard paints. Knowing how much to thin them would be awesome. I would try the likes of P3 or Vallejo, but not having any stockists nearby at all means I have to order online and unless I order lots, I have to pay postage (which is not worth it if it is only 1-3 pots of paint) I can at least get to a relatively local GW. It is also good hat you have friends who can guide you along too. Not jealous of that at all :P Looking forward to seeing some more progress :) Link to comment https://bolterandchainsword.com/topic/317324-muffins-progress-blog/page/2/#findComment-4425882 Share on other sites More sharing options...
lovesmuffins Posted June 22, 2016 Author Share Posted June 22, 2016 Today I used a 1:3 (1 being the paint) and didn't have any clogging. I mixed them to be just a little thicker than the shades. I have an older Vallejo brown that I tried yesterday straight from the pot. But it's a really old paint (at least 7 years old) and I don't think I quite got it mixed completely before dropping it in (was a little over zealous in wanting to use my brush) I don't have any experience with p3 But I hear it's on the thicker side. I'd try warcolours they are cheap and come in dropper bottles. My buddy uses these religiously now. Those will be the next paints I try Www.warcolours.com Link to comment https://bolterandchainsword.com/topic/317324-muffins-progress-blog/page/2/#findComment-4425941 Share on other sites More sharing options...
Dantay VI Posted June 22, 2016 Share Posted June 22, 2016 Coolio!! Thanks for that, now I can start experimenting bwah hahaha!! I will look into warcolours Link to comment https://bolterandchainsword.com/topic/317324-muffins-progress-blog/page/2/#findComment-4425949 Share on other sites More sharing options...
lovesmuffins Posted June 22, 2016 Author Share Posted June 22, 2016 http://www.models-workshop.com/2016/whats-in-a-bottle-warcolours-review-exclusive-10-discount-code-included/ Here is my friends review on them. Link to comment https://bolterandchainsword.com/topic/317324-muffins-progress-blog/page/2/#findComment-4425952 Share on other sites More sharing options...
Dantay VI Posted June 22, 2016 Share Posted June 22, 2016 I absolutely love the fact they do their paints in gradients. Depending on how the greys match to what I GW have I might give it a shot. Would save a lot of time and hassle mixing Your friends AoS model is pretty epic on their website. Link to comment https://bolterandchainsword.com/topic/317324-muffins-progress-blog/page/2/#findComment-4425960 Share on other sites More sharing options...
lovesmuffins Posted June 22, 2016 Author Share Posted June 22, 2016 The names are awesome too... Grey 1, grey 2, grey 3.... lol at least that way it's easy to remember! Link to comment https://bolterandchainsword.com/topic/317324-muffins-progress-blog/page/2/#findComment-4425970 Share on other sites More sharing options...
lovesmuffins Posted June 22, 2016 Author Share Posted June 22, 2016 There are a few others that contribute to the site as well. I think his first AoS purchase was this past weekend with silver tower. Which I think he said was his first gw purchase in 10 years For the greys I'd definitely at least grab the set and try them out. Worst case scenario they don't match and you use them for something else. Link to comment https://bolterandchainsword.com/topic/317324-muffins-progress-blog/page/2/#findComment-4425972 Share on other sites More sharing options...
lovesmuffins Posted June 22, 2016 Author Share Posted June 22, 2016 Managed to get some more painting I today. Pictures to follow here in a bit once I get my chores done for the wife.... Link to comment https://bolterandchainsword.com/topic/317324-muffins-progress-blog/page/2/#findComment-4426581 Share on other sites More sharing options...
lovesmuffins Posted June 23, 2016 Author Share Posted June 23, 2016 http://imagizer.imageshack.us/v2/80x600q90/924/pHolQy.jpg http://imagizer.imageshack.us/v2/800x600q90/924/S5kfCV.jpg http://imagizer.imageshack.us/v2/600x800q90/924/pHolQy.jpg Link to comment https://bolterandchainsword.com/topic/317324-muffins-progress-blog/page/2/#findComment-4426651 Share on other sites More sharing options...
lovesmuffins Posted June 23, 2016 Author Share Posted June 23, 2016 Used the new copper metallic on ulriks trim and the inside of the wings on the crozius. I love how easy this paint is to control with a brush goes on very easily. Link to comment https://bolterandchainsword.com/topic/317324-muffins-progress-blog/page/2/#findComment-4426658 Share on other sites More sharing options...
Dantay VI Posted June 23, 2016 Share Posted June 23, 2016 That copper looks lush!! Have you shaded or highlighted it? Also is it wacolours or GW? Link to comment https://bolterandchainsword.com/topic/317324-muffins-progress-blog/page/2/#findComment-4426796 Share on other sites More sharing options...
lovesmuffins Posted June 23, 2016 Author Share Posted June 23, 2016 It's the gw fulgrite copper (I think). no highlights. That's just straight from the pot Link to comment https://bolterandchainsword.com/topic/317324-muffins-progress-blog/page/2/#findComment-4427042 Share on other sites More sharing options...
lovesmuffins Posted June 25, 2016 Author Share Posted June 25, 2016 Picked up the new gw silver paint today. I really couldn't resist. Spent too much time at the flgs talking with the owner and missed out on a couple hours of painting (woops). I have a knight renegade box coming in next week (skipped the warden and just went ahead with 2× the Knights *insert happy face*!!! ) and another dreadnought the week after. Not building anything until my first etl vow is finished. (Which should be done this coming week.) After that I may have to figure out another small vow that I can quickly finish with Cypher. I don't really want to spend time building so it may be the rest of my wulfen with Cypher. I may not get to the Knights until the etl is complete so please keep an eye out for them. I already have colors picked out for both. Link to comment https://bolterandchainsword.com/topic/317324-muffins-progress-blog/page/2/#findComment-4428422 Share on other sites More sharing options...
Dantay VI Posted June 25, 2016 Share Posted June 25, 2016 I will keep an eye out for them, and there s no harm in building tem before your vow is completed, as it can be a good stress relief to have a second project on the go. or those times when you get fed up of grey or a hobby slump sets in. Just so long as the vows get completed ;) Link to comment https://bolterandchainsword.com/topic/317324-muffins-progress-blog/page/2/#findComment-4428549 Share on other sites More sharing options...
lovesmuffins Posted June 25, 2016 Author Share Posted June 25, 2016 Haha, I don't have a ton of hobby time that's why I'm going to put them off until after the vow is done. One of them my friend claimed as a commission piece(along with the terrain piece). The one I'm painting will end up being in one of the new(er) gold metallics and some reds to really make him knightly. I don't feel like making the "wolf knight" really fits what I want for them. Link to comment https://bolterandchainsword.com/topic/317324-muffins-progress-blog/page/2/#findComment-4428712 Share on other sites More sharing options...
lovesmuffins Posted June 30, 2016 Author Share Posted June 30, 2016 http://imagizer.imageshack.us/v2/800x600q90/924/1Uf5Lu.png Mr. Slayer complete Link to comment https://bolterandchainsword.com/topic/317324-muffins-progress-blog/page/2/#findComment-4432816 Share on other sites More sharing options...
lovesmuffins Posted July 2, 2016 Author Share Posted July 2, 2016 So while at work tonight, I've been playing with battle scribe and just trying to (from memory) point up my entire great company. With the addition of the two nights next week and a blizzard dread. I'm sitting right around 6100 points. Still slowly approaching the 10k mark. Models I still want before I go warhound big or start something new: 1.Magnetized weapon options land raider 2.Stormgrrr x2 (one of each type) 3. 3-6 drop pods 4. Sicarin (because it makes this sound: dakkadadakkadakka) 5. Logan 6. Arjac 7. Njal 8. Krom Link to comment https://bolterandchainsword.com/topic/317324-muffins-progress-blog/page/2/#findComment-4433718 Share on other sites More sharing options...
Dantay VI Posted July 3, 2016 Share Posted July 3, 2016 Mr. the Slayer looks pretty awesome :tu: Link to comment https://bolterandchainsword.com/topic/317324-muffins-progress-blog/page/2/#findComment-4434469 Share on other sites More sharing options...
lovesmuffins Posted July 4, 2016 Author Share Posted July 4, 2016 http://imagizer.imageshack.us/v2/800x600q90/924/oYEJXH.png Almost done with the pack leader in what it took to watch 1 episode of Grey's Anatomy (what can is say? the nurse of the house got me hooked on it) need to pick out silver bits and shade/highlight the face. Next 2 coming shortly after I run to get nourishment supplies. Shouldn't take more than an hour total to finish the last 2 thunderwolves. The real challenge tonight will be the 5 wulfen but as long as I don't focus on just 1 and assembly line them they should go pretty quick. There's not much to paint other than flesh/fur tones. Their armor will be a breeze and shade/highlight shouldnt take long. Picked up the last piece to the Cypher puzzle tonight. I looked at picking up the DA upgrade sprue weeks ago but didn't see a hooded head...turns out there is one in there I just by passed it Link to comment https://bolterandchainsword.com/topic/317324-muffins-progress-blog/page/2/#findComment-4434724 Share on other sites More sharing options...
KiltedMarine Posted July 4, 2016 Share Posted July 4, 2016 The conversion for the Wolf Priest is brilliant, and I really admire the pelts on the TWS. Looking good, man! Link to comment https://bolterandchainsword.com/topic/317324-muffins-progress-blog/page/2/#findComment-4434779 Share on other sites More sharing options...
lovesmuffins Posted July 4, 2016 Author Share Posted July 4, 2016 The conversion for the Wolf Priest is brilliant, and I really admire the pelts on the TWS. Looking good, man! Which wolf priest? If you're talking about the terminator armor priest, then thank you. I was digging through my bits box one day and it just struck me to use that dreadnought head for a wolf priest and terminator armor was the only way to do it. The TWS I have since gone back over. It started as an experiment with my air brush to try to see how I could get some blending down. I ended up going back over the brownish white one and built them all up to grey and sprayed a mix of dawnstone and drakenhof nightshade and have since dry brushed praxeti white Link to comment https://bolterandchainsword.com/topic/317324-muffins-progress-blog/page/2/#findComment-4434784 Share on other sites More sharing options...
lovesmuffins Posted July 4, 2016 Author Share Posted July 4, 2016 http://imagizer.imageshack.us/v2/800x600q90/921/rDoTyy.jpg Twc and ulrik finished. I'll take better photos later. Don't worry their bases are finished now and drying. http://imagizer.imageshack.us/v2/800x600q90/922/2TW116.jpg Project: wulfen taking longer to get to than I expected I have a couple hours left in me. Link to comment https://bolterandchainsword.com/topic/317324-muffins-progress-blog/page/2/#findComment-4434799 Share on other sites More sharing options...
KiltedMarine Posted July 4, 2016 Share Posted July 4, 2016 The terminator one is great, but the conversion using the B@C mk IV body really jumped out at me. The wolf helmet on that armor is just too cool. Link to comment https://bolterandchainsword.com/topic/317324-muffins-progress-blog/page/2/#findComment-4434807 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.