Chaplain Raeven Posted October 7, 2016 Share Posted October 7, 2016 PVA is awesome. I've seen some people build capes/cloaks from tissues soaked with PVA-glue. Should work with the foam of your cushions as well Link to comment https://bolterandchainsword.com/topic/322324-greenzz-angels-of-absolution-5th-co-wip/page/4/#findComment-4523820 Share on other sites More sharing options...
Major_Gilbear Posted October 7, 2016 Share Posted October 7, 2016 Well, the technique as I remember it was: - Cut and tear the foam to the shapes you want. - Squidge the foam in a PVA and water mix to make sure the whole thing was fully soaked, and let it dry. - If it's still a bit too flexible, brush some more thinned PVA over the whole thing, and let it dry again. - With a large cheap/old brush, stipple thinned plaster (the ready-mixed wall filler stuff) all over it to give it a more "rock-like" texture, and allow to dry. - Paint as you would other scenery. It's apparently quite durable, and not too heavy. The chap I saw do this stuck it to a base as well, partly for added strength, and partly to stop it moving around during games. Link to comment https://bolterandchainsword.com/topic/322324-greenzz-angels-of-absolution-5th-co-wip/page/4/#findComment-4523884 Share on other sites More sharing options...
Greenz Posted October 7, 2016 Author Share Posted October 7, 2016 I'll definitely bear that in mind about the foam. Especially if it's firm, might make a great base for flames. I went with the foliage largely because of all the images I found for flamethrowers. Typically, once the accelerant is a couple feet out, the stream turns into almost a rolling ball of flame. I felt the foliage gave that "expanding" feel GRC, that's a great tip, thanks. I'll have to mess around with that too. Up till now I've been a sucker using cereal box cardboard and GS to make robes and such! Link to comment https://bolterandchainsword.com/topic/322324-greenzz-angels-of-absolution-5th-co-wip/page/4/#findComment-4523993 Share on other sites More sharing options...
Chaplain Raeven Posted October 7, 2016 Share Posted October 7, 2016 BCK's tutorial Link to comment https://bolterandchainsword.com/topic/322324-greenzz-angels-of-absolution-5th-co-wip/page/4/#findComment-4524017 Share on other sites More sharing options...
jbaeza94 Posted October 7, 2016 Share Posted October 7, 2016 GRC, thanks for sharing that link! I'm definitely going to give that a try! It seems easier than green stuff! Link to comment https://bolterandchainsword.com/topic/322324-greenzz-angels-of-absolution-5th-co-wip/page/4/#findComment-4524091 Share on other sites More sharing options...
Chaplain Raeven Posted October 7, 2016 Share Posted October 7, 2016 Thank BCK, he's the mastermind behind it. Link to comment https://bolterandchainsword.com/topic/322324-greenzz-angels-of-absolution-5th-co-wip/page/4/#findComment-4524095 Share on other sites More sharing options...
Greenz Posted October 7, 2016 Author Share Posted October 7, 2016 Wow, thanks for the link! I'll definitely be giving that a try. Textured too, just need to find the right brand ;) Link to comment https://bolterandchainsword.com/topic/322324-greenzz-angels-of-absolution-5th-co-wip/page/4/#findComment-4524147 Share on other sites More sharing options...
FinylCut Posted October 10, 2016 Share Posted October 10, 2016 Greenz: You've outdone yourself on the assault squad, brother. The first flamer marine has an outstanding feeling of motion. Thanks for sharing. FC Link to comment https://bolterandchainsword.com/topic/322324-greenzz-angels-of-absolution-5th-co-wip/page/4/#findComment-4525663 Share on other sites More sharing options...
Greenz Posted October 10, 2016 Author Share Posted October 10, 2016 Thanks FC! I'm really trying to get across the feeling of this squad landing amongst a mob of boyz. The next 5 in the squad will be doing more dirty work. Im glad you're enjoying so far! Link to comment https://bolterandchainsword.com/topic/322324-greenzz-angels-of-absolution-5th-co-wip/page/4/#findComment-4525879 Share on other sites More sharing options...
SteelDragon26 Posted October 10, 2016 Share Posted October 10, 2016 The modelling on these models is amazing, really like the feeling of movement and action they exude. Link to comment https://bolterandchainsword.com/topic/322324-greenzz-angels-of-absolution-5th-co-wip/page/4/#findComment-4525910 Share on other sites More sharing options...
Greenz Posted October 15, 2016 Author Share Posted October 15, 2016 Small update. I decided to take some pics of the terminators as they are. The SB terminators are close to being done, they just need the chapter symbols, battle damage, and power fist effects. The thundernators are in need of a bit more love, so Ill be entering them into the Covenant competition. I was originally thinking of putting in my half assault squad, but with 4 squads still not "fully" complete, I probably shouldnt start a 5th. Hope you guys enjoy! And if anyone has any thoughts/ suggestions on the red power fists, Im all ears. I liked the idea at first, but now Im not 100% sure. They might look better bone, or brighter red but with black striping, like from the Siege of Vraks books. Edit: I thought Id rectified the image size issue, but theyre still coming out small. Anyone have any suggestions on how I can post larger pics? Link to comment https://bolterandchainsword.com/topic/322324-greenzz-angels-of-absolution-5th-co-wip/page/4/#findComment-4532800 Share on other sites More sharing options...
Major_Gilbear Posted October 15, 2016 Share Posted October 15, 2016 I like the red fists, but I think that because they are rather big, they add too much colour to the model (which is distracting). Maybe make just the fingers red, and the rest of the fist's housing bone (or black with a little bit of white checkerboard detail here and there)? //Edit: Or maybe make the fingers bone, and have the fist housing in black and red diagonal stripes - like industrial stripes but with red instead of yellow? // As for bigger images, you just need to link directly to the image with image tags (right-click "view image" in the gallery and then take the url out of the address bar). Link to comment https://bolterandchainsword.com/topic/322324-greenzz-angels-of-absolution-5th-co-wip/page/4/#findComment-4532823 Share on other sites More sharing options...
Greenz Posted October 16, 2016 Author Share Posted October 16, 2016 Greatly appreciated Major. I don't know if I kept making the same mistake or what, but I've finally got it figured out As for the fist, I think it'll probably be straight bone. I might mess around with some spare fists. Though the checker pattern sounds fun, if a little frustrating :D Link to comment https://bolterandchainsword.com/topic/322324-greenzz-angels-of-absolution-5th-co-wip/page/4/#findComment-4533003 Share on other sites More sharing options...
Malcifer Posted October 16, 2016 Share Posted October 16, 2016 Termi on the right: "which pouch did I put those spare magazines in?" Top notch work! It all looks good. Those xenos might not be loving it though. Link to comment https://bolterandchainsword.com/topic/322324-greenzz-angels-of-absolution-5th-co-wip/page/4/#findComment-4533008 Share on other sites More sharing options...
Chaplain Raeven Posted October 16, 2016 Share Posted October 16, 2016 Nice! Thundernators pummeling Orks is a beautifull sight. Some splatter effect on the headblow would be wicked. And that bone colour! The Angels of Absolution are a very fitting chapter for your skills. That being sais, I'm not sold on the bone robes though (even if it is according to fluff). I personally like the red fists. Just colouring the fingers isn't a bad idea either. I used bone fingers with green fists and red fingers with black fists. It looks better than you would think. Link to comment https://bolterandchainsword.com/topic/322324-greenzz-angels-of-absolution-5th-co-wip/page/4/#findComment-4533061 Share on other sites More sharing options...
Greenz Posted October 16, 2016 Author Share Posted October 16, 2016 Thanks for the compliment GRC :) bone colour and I have a very love/ hate relationship. Dont worry, there will be blood splatter and power weapon effects. Funny you mention the robes. There is no real fluff on them. The good Major suggested a while back to try white robes for the 1st, black robes for the 2nd co, and green for battle companies. I love the idea, but in practice I find the white robes get lost. I think I'll stick with a uniform green Link to comment https://bolterandchainsword.com/topic/322324-greenzz-angels-of-absolution-5th-co-wip/page/4/#findComment-4533329 Share on other sites More sharing options...
Major_Gilbear Posted October 16, 2016 Share Posted October 16, 2016 Yeah, I have to admit that getting bone armour and white robes to look separate is pretty tricky... Doable, but very tricky. Maybe make 1st Company robes red? So red-black-green for 1st-2nd-3-10th accordingly. If you make the fists bone coloured and the robes red, that might also "shift" the palette a bit more towards bone overall and look a bit more "Derathwing"? Link to comment https://bolterandchainsword.com/topic/322324-greenzz-angels-of-absolution-5th-co-wip/page/4/#findComment-4533360 Share on other sites More sharing options...
Greenz Posted October 16, 2016 Author Share Posted October 16, 2016 Very true Major. The robes are more of a true white in person, the camera definitely blends the two together. But overall there's very little to separate them, and I remember from my chaplain that I wasn't feeling the gray base for the robes. I have a DV test marine with GS robes on him, so I'll give the red robes a go. Link to comment https://bolterandchainsword.com/topic/322324-greenzz-angels-of-absolution-5th-co-wip/page/4/#findComment-4533386 Share on other sites More sharing options...
Greenz Posted November 7, 2016 Author Share Posted November 7, 2016 All of these fantastic updates today convinced me I need to update my own thread. Unfortunately with some wicked super cold ripping through my household, my painting has fallen far behind where I should be for these 2 challenges. Im hoping I can bunker down now and get everything done Heres my Chapter Master Ammiar, still very much a WIP All the base coats are on. The bone armour and blacks are mostly done, but the rest of the details still need picking out And a couple more assault marines are done too I see finger prints now... 7/10 built, 1 almost built, 2 nowhere near done Link to comment https://bolterandchainsword.com/topic/322324-greenzz-angels-of-absolution-5th-co-wip/page/4/#findComment-4555594 Share on other sites More sharing options...
Spaced Hulk Posted November 7, 2016 Share Posted November 7, 2016 The Chapter Master is looking awesome mate! You've possibly already answered this before, but are those the arms & sword from the DV Company Master? Link to comment https://bolterandchainsword.com/topic/322324-greenzz-angels-of-absolution-5th-co-wip/page/4/#findComment-4556317 Share on other sites More sharing options...
Greenz Posted November 7, 2016 Author Share Posted November 7, 2016 The Chapter Master is looking awesome mate! You've possibly already answered this before, but are those the arms & sword from the DV Company Master? Thanks Hulk! I may or may not have answered it earlier. Yes, the hands, sword and head are all the DV master. I love the model, especially for a box set snap fit, but he's way too static for what I'm trying to pull off with this project. The rest of the model is mostly sternguard bits, and the cape is from my wood elves Link to comment https://bolterandchainsword.com/topic/322324-greenzz-angels-of-absolution-5th-co-wip/page/4/#findComment-4556386 Share on other sites More sharing options...
FinylCut Posted November 13, 2016 Share Posted November 13, 2016 Greenz: I hope things warm up for you soon; time is running short. The chapter master is coming along very nicely. Thanks for sharing. FC Link to comment https://bolterandchainsword.com/topic/322324-greenzz-angels-of-absolution-5th-co-wip/page/4/#findComment-4560910 Share on other sites More sharing options...
Syphid Posted November 21, 2016 Share Posted November 21, 2016 You bring honour to the chapter! Link to comment https://bolterandchainsword.com/topic/322324-greenzz-angels-of-absolution-5th-co-wip/page/4/#findComment-4568879 Share on other sites More sharing options...
Greenz Posted November 22, 2016 Author Share Posted November 22, 2016 Thanks Syphid, but I bring no more honour to our chapter than you do ;) FC, thank you. My household managed to get rid of our illnesses in time to finish my vows. Link to comment https://bolterandchainsword.com/topic/322324-greenzz-angels-of-absolution-5th-co-wip/page/4/#findComment-4568936 Share on other sites More sharing options...
Syphid Posted December 6, 2016 Share Posted December 6, 2016 I'm really curious to see the shoulderpad work on Ammiar, would you be willing to show us a side profile picture? :D Link to comment https://bolterandchainsword.com/topic/322324-greenzz-angels-of-absolution-5th-co-wip/page/4/#findComment-4584826 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.