[Review] Kromlech - Bedlam Fraternity Legs

[Jolemai]

Kromlech - Bedlam Fraternity Legs

The link for these can be found here.

These were a gift from a friend of mine so I can't comment on any delivery time or packaging. As they are in blister format, I gather they were acquired from an independent stockist (feel free to let me know in the replies and I'll update).

Blister:

Front:


Back:


Have to say, the QR code is a nice touch (and yes it works).

On to the models, there's some flash as expected with resin but no bubbles or warping. Detail is crisp:

Front:

Back:

They are attached to the sprue on the underneath of the feet meaning that no damage will be caused to the model when you removed them (provided you're careful and follow the usual procedure for freeing resin bits from spure of course)

Next up is the dryfit. The bits used to demonstrate the model are a power armoured Grey Knights torso with weapons and heads from the Death Company box. The base is an old 25mm one. It's held together with blu-tac.

Front:


Side:


Back:

Bar a bit of flash and the underneath of the feet being smoothed out, not much is needed to make a model. The tops of the legs is curved like GWs to allow a torso to fit and the detail on the groin doesn't impede twisting at the hip too much

Finally, we have a comparison picture of Kromlech's offering placed alongside some of GW's.

From left to right: Sanguinary Guard -> Kromlech dryfit -> current Tactical Marine kit -> third edition Death Company Marine:



As you can see, the leg size is all in the same ball park. The SG is there to show the difference with a less static pose and show off the current scale, as is the Tactical Marine (static pose). The DC chap is there to show how it ranks up against the older stuff

[Charlo]

Looks like some solid casting!

 

http://s2.quickmeme.com/img/56/56421f0d2c90d936375b9d95625a32d498bf70425edac3eaa3fb33e47b9931d0.jpg