Guest kodopitharos Posted August 14, 2011 Share Posted August 14, 2011 Hello there, I have begun designing an Emperor Warmonger Titan for a customer which I will begin building on tuesday. The design is based on this model. http://i1122.photobucket.com/albums/l534/Kodopitharos/Emperor%20Titan%20WIP/Emperor.jpg The weapon loadout will be Vengeance cannon, Hellstorm Cannon, 4 Laser Blasers, Volcano Cannon and Quake Cannon. And here is the link with the 3d model fly-around movie Emperor Warmonger Titan Fly-around The construction is going to be mainly extruded polysterene parts cut with CnC hot wire and foamboard. The customer also requests working lights which will be fun working with. C&C welcome! Link to comment https://bolterandchainsword.com/topic/236319-emperor-titan-commission/ Share on other sites More sharing options...
MRCHAOS Posted August 14, 2011 Share Posted August 14, 2011 That is going to be one hell of a Beast! Link to comment https://bolterandchainsword.com/topic/236319-emperor-titan-commission/#findComment-2847033 Share on other sites More sharing options...
Tsuro Posted August 14, 2011 Share Posted August 14, 2011 Sounds like a fun project, i look forward to the WIPs. If you're doing away with its leg doors I'd consider getting rid of the stairs on the feet along with them; it not like they're needed anymore - the reference model has them because it's based off of the imperator model, but if you're building up from scratch there's no such restriction. Tsuro Link to comment https://bolterandchainsword.com/topic/236319-emperor-titan-commission/#findComment-2847092 Share on other sites More sharing options...
Guest kodopitharos Posted August 14, 2011 Share Posted August 14, 2011 Well the problem is that there only exists an official Imperator Datasheet so although the titan is a Warmonger it will actually be used as an imperator with normal transport capacity. I will add Air lock doors on each side of the feet. At the momment I am a bit concerned with how the model will balance. I also had an idea for a Golden emperor titan, matching the Adeptus Custodes probably? Anyway here is the new concept flyaround. And here is the head concept http://i1122.photobucket.com/albums/l534/Kodopitharos/Emperor%20Titan%20WIP/EmperorTitanAlthead.jpg Link to comment https://bolterandchainsword.com/topic/236319-emperor-titan-commission/#findComment-2847133 Share on other sites More sharing options...
Terminatorinhell Posted August 14, 2011 Share Posted August 14, 2011 Also maybe bulking out the thighs would be a good idea as well, the ones on the reference look too thin to work. Link to comment https://bolterandchainsword.com/topic/236319-emperor-titan-commission/#findComment-2847135 Share on other sites More sharing options...
Vaaish Posted August 15, 2011 Share Posted August 15, 2011 If you are interested, I still have the top and rear views of that imperator Warmaster Nice converted you are using as a base for this. He appears to have placed the doors for the leg bastions on the back of the models feet. Link to comment https://bolterandchainsword.com/topic/236319-emperor-titan-commission/#findComment-2847511 Share on other sites More sharing options...
Sons of Horus Posted August 15, 2011 Share Posted August 15, 2011 I really hope you complete this WIP since it looks promising. Link to comment https://bolterandchainsword.com/topic/236319-emperor-titan-commission/#findComment-2847720 Share on other sites More sharing options...
Guest kodopitharos Posted August 15, 2011 Share Posted August 15, 2011 I really hope you complete this WIP since it looks promising. I have to :) Im getting paid for this and the bills are gaining on me <_< @ Vaaish : I would really appreciate if you could give me the rear view of the model. I cant seem to find it anywhere and am just reconstructing it from pure imagination B) Link to comment https://bolterandchainsword.com/topic/236319-emperor-titan-commission/#findComment-2847827 Share on other sites More sharing options...
Loken86 Posted August 15, 2011 Share Posted August 15, 2011 Dude this is gonna be sweet can't wait to see you build this beast gotta love titans Link to comment https://bolterandchainsword.com/topic/236319-emperor-titan-commission/#findComment-2848428 Share on other sites More sharing options...
Guest kodopitharos Posted August 16, 2011 Share Posted August 16, 2011 I completed the paths for all the polysteren parts , minus the weapons and arms. The following paths are for the feet, legs, pelvis and most parts of the torso. Tommorrow will be a trip to the machine shop to get all these parts cut. After I shake off the dizziness from a day's work among poisonous fumes Ill start assembling the thing and bring you more pics :D http://i1122.photobucket.com/albums/l534/Kodopitharos/Emperor%20Titan%20WIP/EmperorTemplates-3.jpg http://i1122.photobucket.com/albums/l534/Kodopitharos/Emperor%20Titan%20WIP/EmperorTemplates-2.jpg http://i1122.photobucket.com/albums/l534/Kodopitharos/Emperor%20Titan%20WIP/EmperorTemplates-1.jpg Link to comment https://bolterandchainsword.com/topic/236319-emperor-titan-commission/#findComment-2848993 Share on other sites More sharing options...
Guest kodopitharos Posted August 22, 2011 Share Posted August 22, 2011 I got back today with 2 huge bags full of Emperor Titan parts and started the assembly - it is going to take a while. Here is the WIP on the feet. I put my Warlord next to the Emperor feet for size comparison. The current design Im working on will give me an Emperor 36" tall http://i1122.photobucket.com/albums/l534/Kodopitharos/Emperor%20Titan%20WIP/100_0513.jpg http://i1122.photobucket.com/albums/l534/Kodopitharos/Emperor%20Titan%20WIP/100_0514.jpg http://i1122.photobucket.com/albums/l534/Kodopitharos/Emperor%20Titan%20WIP/100_0516.jpg http://i1122.photobucket.com/albums/l534/Kodopitharos/Emperor%20Titan%20WIP/100_0517.jpg Tommorrow Ill probably have the rest of the legs up to the pelvis complete. C&C welcome! Link to comment https://bolterandchainsword.com/topic/236319-emperor-titan-commission/#findComment-2854506 Share on other sites More sharing options...
Guest kodopitharos Posted August 23, 2011 Share Posted August 23, 2011 Well unfortunately it seems that the shoulder area is slightly smaller than it should. I will make one of the correct size probably tommorrow. So far the build seems great. I actually put a 5kg weight on top of it and it held well. Offcourse I didnt trust it long enough to take a picture of it ;). I tried a larger thigh armour plate on the left leg which I think makes the entire leg look kind of right (the thigh plate is actually a reject lower leg plating from a Warlord Titan). The back is going to accomodate the batteries and wiring for the LED lights. At the momment I am not sure what to do on the back of the feet to allow models to safely move off the Titan. Any ideas? I'd rather not make a ladder of any kind. http://i1122.photobucket.com/albums/l534/Kodopitharos/Emperor%20Titan%20WIP/100_0518.jpg http://i1122.photobucket.com/albums/l534/Kodopitharos/Emperor%20Titan%20WIP/100_0519.jpg http://i1122.photobucket.com/albums/l534/Kodopitharos/Emperor%20Titan%20WIP/100_0520.jpg http://i1122.photobucket.com/albums/l534/Kodopitharos/Emperor%20Titan%20WIP/100_0521.jpg http://i1122.photobucket.com/albums/l534/Kodopitharos/Emperor%20Titan%20WIP/100_0522.jpg Ignore the wooden dowel running down from his groin - I just couldnt be asked to saw it off at this time of night. Link to comment https://bolterandchainsword.com/topic/236319-emperor-titan-commission/#findComment-2855404 Share on other sites More sharing options...
Commander S. Caesare Posted August 23, 2011 Share Posted August 23, 2011 WOW thats an awkward note to mention. hope all goes well. Link to comment https://bolterandchainsword.com/topic/236319-emperor-titan-commission/#findComment-2855416 Share on other sites More sharing options...
winterdyne Posted August 23, 2011 Share Posted August 23, 2011 You're running some sort of CNC hot wire setup. The models themselves (sorry) could be better in terms of proportion and pose, but I'm damn impressed by the production method. Edit: I do note your models get better with each revision, I'm not digging, just pointing out you can improve... :-) Link to comment https://bolterandchainsword.com/topic/236319-emperor-titan-commission/#findComment-2855476 Share on other sites More sharing options...
Guest kodopitharos Posted August 23, 2011 Share Posted August 23, 2011 I was thinking of shortening the thighs actually. It doesnt seem imperiumy enough :yes: And dont be sorry - Im posting here so I can get constructive criticism like that :P Link to comment https://bolterandchainsword.com/topic/236319-emperor-titan-commission/#findComment-2855539 Share on other sites More sharing options...
Dark Apostle Thirst Posted August 23, 2011 Share Posted August 23, 2011 So worth following, but I do agree that it needs a lot of baroque and gothic decorations, as well as a lot of Aquilas and Cogs for the Admech. Link to comment https://bolterandchainsword.com/topic/236319-emperor-titan-commission/#findComment-2855554 Share on other sites More sharing options...
Olis Posted August 24, 2011 Share Posted August 24, 2011 Wow, this is coming along pretty quick. I'd love to see your rendition of that beast's weaponry. :P Link to comment https://bolterandchainsword.com/topic/236319-emperor-titan-commission/#findComment-2855661 Share on other sites More sharing options...
winterdyne Posted August 24, 2011 Share Posted August 24, 2011 Think it needs to be in a walking pose more. Link to comment https://bolterandchainsword.com/topic/236319-emperor-titan-commission/#findComment-2855979 Share on other sites More sharing options...
Guest kodopitharos Posted August 24, 2011 Share Posted August 24, 2011 Ok, I shortened the thighs and the model came far closer to the original model. It also came closer to the 35-36 inches target height. I still need to make the plateau on the shoulder a bit larger so it can accomodate the weapon hard points without them touching the legs. I also adjusted the legs to create a subtle walking pose - didnt want to unbalance the model in any way. The small legs are from another WIP warlord titan. http://i1122.photobucket.com/albums/l534/Kodopitharos/Emperor%20Titan%20WIP/100_0527.jpg http://i1122.photobucket.com/albums/l534/Kodopitharos/Emperor%20Titan%20WIP/100_0528.jpg http://i1122.photobucket.com/albums/l534/Kodopitharos/Emperor%20Titan%20WIP/100_0529.jpg http://i1122.photobucket.com/albums/l534/Kodopitharos/Emperor%20Titan%20WIP/100_0530.jpg http://i1122.photobucket.com/albums/l534/Kodopitharos/Emperor%20Titan%20WIP/100_0531.jpg C&C always welcome! Link to comment https://bolterandchainsword.com/topic/236319-emperor-titan-commission/#findComment-2856385 Share on other sites More sharing options...
Khargan Posted August 24, 2011 Share Posted August 24, 2011 I'm not going to lie... this project actually turns me on in a hobby sort of way... not sure if you get that... er... ANYWAY, I am left actually wanting one of those and honestly I was sat here at the start feeling very cynical about this project and now feel rather foolish.. Really awesome work, that foam put together looks like it has come leaps and bounds from the first one!.. PM me the price? :lol: Link to comment https://bolterandchainsword.com/topic/236319-emperor-titan-commission/#findComment-2856511 Share on other sites More sharing options...
HellChyld Posted August 24, 2011 Share Posted August 24, 2011 when you pm the price to Khargan mind pm'ing it to me too easily worth wanting one of these....... Link to comment https://bolterandchainsword.com/topic/236319-emperor-titan-commission/#findComment-2856557 Share on other sites More sharing options...
Watcher in the Dark Posted August 24, 2011 Share Posted August 24, 2011 I would like to know the price too...hehe. Project is looking very good! Link to comment https://bolterandchainsword.com/topic/236319-emperor-titan-commission/#findComment-2856623 Share on other sites More sharing options...
Vor Posted August 26, 2011 Share Posted August 26, 2011 Are you the guy who sells the Warlord commissions on ebay? Link to comment https://bolterandchainsword.com/topic/236319-emperor-titan-commission/#findComment-2858176 Share on other sites More sharing options...
Master of fact Posted August 26, 2011 Share Posted August 26, 2011 Good googly moog thats HUGE. I hope you measured the door to your work space to get the bugger out!! Looks great so far. Dang you lot and you money!!!!! Link to comment https://bolterandchainsword.com/topic/236319-emperor-titan-commission/#findComment-2858202 Share on other sites More sharing options...
Zincite Posted August 26, 2011 Share Posted August 26, 2011 Very cool... Moar! :D Link to comment https://bolterandchainsword.com/topic/236319-emperor-titan-commission/#findComment-2858649 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.