Rossco Posted June 21, 2010 Share Posted June 21, 2010 I usually use a spray varnish and everything is wonderful and all is well in the world but on my latest project I need different finishes in different spots and so am using GW 'ard cote and brushing it on, it seems a little thicker than I'd like so my question is, should I be thinning it and with what ? thanks in advance for any help you can give, Rossco Link to comment Share on other sites More sharing options...
Tanhausen Posted June 21, 2010 Share Posted June 21, 2010 I believe you can thin it with water (like any acrylic based products). If it is solvent based, it will eat both the plastic and the acrylic paints Hope it helps! Link to comment Share on other sites More sharing options...
Moribund the Burgermeister Posted June 22, 2010 Share Posted June 22, 2010 Water is correct (assuming you use GWs or similar), and yes, you should thin it just like any other paint you use. Link to comment Share on other sites More sharing options...
Rossco Posted June 24, 2010 Author Share Posted June 24, 2010 Cheers guys Link to comment Share on other sites More sharing options...
Tranc Posted June 24, 2010 Share Posted June 24, 2010 Be careful, if you use too much water, it may pool and collect in places. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.