WAR Posted July 8, 2016 Share Posted July 8, 2016 (edited) +++Accessing Data-Loom XCVIIΦ... +++Establishing Link.... ++Servitor Φ-264 has connected to Terminal Σ221 ++Servitor Φ-89A has connected to Terminal Ω79 +CONNECTING.... +CONNECTING.... +CONNECTING.... +++CONNECTION ESTABLISHED+++*hissing electronics and vox feedback*"Welcome, Commander, to the Khymara Sub-Sector. If we had thought times were hard for the Imperium of Man due to the Thirteenth Black Crusade, then we knew nothing of what has lurked in the shadows for us here. The Kymara sub-sector lies in the Western Fringe of the Ultima Segmentum and sits along the Malestrom. Such a thing has given it great prosperity and great danger, as such things are seen throughout the galaxy.” "Currently we have been unable to regain contact with one of our Imperial Mining Stations, Alpha -67c on Kymara. Imperium forces only control four systems out of the eight within the sub-sector. The sub-sector capitol of Josufa, which is positioned in the center and has had a shaky foothold throughout the last century, but that could be lost.” "Reports have been flooding in for the past decade now on new dangers. The Xenos and Renegade threats have been growing in number and daring, moving out further and more aggressively from various locations. We are afraid one our worlds might become a xenos or renegade vile nest. Aid from several Adeptus Astartes Chapters has been requested in an attempt to assist in exterminating these xenos and renegade threats.” "The last Adeptus Arbites Patrol sent to Kymara in an attempt to regain contact with Alpha-67c has not reported in -- much like the previous 6 such patrols. The Sub-Sector Adeptus Arbites Precinct has filed several more complaints with the Administratum, protesting the lack of initiative on the sub-sector Governor's part to look further into the issue. The old legends about there being several technologically advanced xenos and renegades within the area continue to dissuade their desire to reach them. The local Ecclesiarch has already sent a report via channels to the Inquisition, requesting advice and help in this heretical matter.” "Much is happening beneath the surface events however, Commander. I can feel it. I can only hope that with your arrival that the Imperium of Man will emerge victorious...even through it is against training to entertain doubt, I feel worried. Things are happening within the sub-sector and for all I know, things will not be brighter on the other side."++END MESSAGE+++ UPDATED 05/19/2017: War009's Raptor 10th company Plog is built around the idea of an All Scout army with very little Power Armour (HQs and Elites only) supported by various other vehicles to give the army the punch it needs. This is a slow moving plog, is built for fun and no way intended to be for competive use, some conversions, and rule of cool is in effect. In preparation for 8th I have broken down the selections as follows. As a model is completed a link will be added to it. UPDATED 07/20/2020: WAR009's Raptors 10th Company Plog has been changed from an all Scout army to focusing on the 2 elements that make up the 10th Company: Vanguard and Scouts. The Army will be comprised of the those 2 elements and support from various other companies.10th Company Shadow Captain Admar Voss has crossed the Rubicon and became a Primaris Marine and is overall Commander of the Raptor Forces on Khymara. UPDATED 02/2022: WAR009' Raptors 10th Company Plog has been forced to change gears due to 9e rules changes. The Army will consisit of mainly Phobos armor units with Support in the form of different detachments from the 2nd Company, Armory and Various Headquarters staffing. some units may be deleted and other units may be added over time Update 01/2024 : My Raptors Chapter has been disbanded and no longer. Update 04/12/2024 Please see this link for HH Ravenguard Edited April 12 by WAR Updated HH RG moving to HH section Nusquam 1 Back to top Link to comment https://bolterandchainsword.com/topic/323795-wars-raven-guard-raptors/ Share on other sites More sharing options...
Relic Posted July 10, 2016 Share Posted July 10, 2016 Raptors without Lias? :O I'd probably go heavier in on the scouts, bare bones bolter caddies with a combi-grav on the sarges, they are quite good! Lots of scouts is a good base. Even in a fluff list, I don't think going with power mauls on vet sarges is the best idea, imo, or the heavy weapons on scouts, as i'd prefer to keep them mobile. Link to comment https://bolterandchainsword.com/topic/323795-wars-raven-guard-raptors/#findComment-4439480 Share on other sites More sharing options...
Race Bannon Posted July 10, 2016 Share Posted July 10, 2016 Lisa boosts bolter weapons though. Without those in number then ... meh. I sort of agree on power mauls, yet that's more of a "if I get into CC" versus "when I get into CC"' you know? WAR 1 Back to top Link to comment https://bolterandchainsword.com/topic/323795-wars-raven-guard-raptors/#findComment-4439626 Share on other sites More sharing options...
Relic Posted July 10, 2016 Share Posted July 10, 2016 ? Raptor chapter tactics give everyone with bolters/bolt pistols, the rending rule if they don't move. Lias manipulates reserves and the like, although a scout army will waste his warlord trait, unless you want to model up some devs as scouts or ruffle up some sternguard. Link to comment https://bolterandchainsword.com/topic/323795-wars-raven-guard-raptors/#findComment-4439692 Share on other sites More sharing options...
Race Bannon Posted July 11, 2016 Share Posted July 11, 2016 Whoops my bad, must be getting old. Still, for all Lias is, the Warlord trait is "neat", but does not make or break him as a choice. Agreed it's wasted on a Scout army, but the theme is cool enough and open up the warlord table for the HQ. In my humble opinion ^_^ WAR 1 Back to top Link to comment https://bolterandchainsword.com/topic/323795-wars-raven-guard-raptors/#findComment-4439920 Share on other sites More sharing options...
WAR Posted July 11, 2016 Author Share Posted July 11, 2016 Raptors without Lias? :O I'd probably go heavier in on the scouts, bare bones bolter caddies with a combi-grav on the sarges, they are quite good! Lots of scouts is a good base. Even in a fluff list, I don't think going with power mauls on vet sarges is the best idea, imo, or the heavy weapons on scouts, as i'd prefer to keep them mobile. Not a fan of taking the Chapter Master on an 10th company "training mission" And personally not a fan of grav weapons......and considering the amount of xenos (nids, tau, eldar) I will be facing, not sure it is worth it. Lisa boosts bolter weapons though. Without those in number then ... meh. I sort of agree on power mauls, yet that's more of a "if I get into CC" versus "when I get into CC"' you know? While lias is cool his abilities are truly lost on the scouts Normally I would take axes and fists but considering the Nid threat and the fact they will be in melee I feel strength 6 is better than striking last or a strength 4 hit ? Raptor chapter tactics give everyone with bolters/bolt pistols, the rending rule if they don't move. Lias manipulates reserves and the like, although a scout army will waste his warlord trait, unless you want to model up some devs as scouts or ruffle up some sternguard. I'm doing the 10th company....so count as devs are a no go. Eventually Sternguard will appear but that will be post campaign (starts at 1000 pts ends at 2500 pts) Whoops my bad, must be getting old. Still, for all Lias is, the Warlord trait is "neat", but does not make or break him as a choice. Agreed it's wasted on a Scout army, but the theme is cool enough and open up the warlord table for the HQ. In my humble opinion ^_^ And there is the 3rd reason not to take lias. Link to comment https://bolterandchainsword.com/topic/323795-wars-raven-guard-raptors/#findComment-4440103 Share on other sites More sharing options...
jpwyrm Posted July 11, 2016 Share Posted July 11, 2016 Agreed, the strongest benefit for taking Lias is his ability to Infiltrate 3 non vehicle units. Though his other abilities would fit the 10th Company theme, I also think the Chapter Master should not bother accompanying a training exercise contingent. That said, I think the Predators and Dreadnought are odd choices as well. I would replace them with Land Speeder Storm and Stormtalons to better mesh with a scout force, giving you even more mobility, transport capacity and quite flexible firepower. You might want to include some meltabombs to tackle MC in CC. Since you don't have the usual suspects to deal with those (Centurions Devastators, grav command squads or Sternguards) you'll probably have to chip at them in multiple shooting phases and your scouts will eventually get stuck in CC with one. Might as well throw a Str8 AP2 bomb in their face out of spite. Who knows, that one lucky sergeant might take the last wound off a Carnifex! WAR 1 Back to top Link to comment https://bolterandchainsword.com/topic/323795-wars-raven-guard-raptors/#findComment-4440175 Share on other sites More sharing options...
WAR Posted July 11, 2016 Author Share Posted July 11, 2016 Have meltabombs, and we agreed no flyers until the first bump (1000 pts to 1500) which I add another scout squad with bolters hvy bolter vet sgt with combi weapon, melta bombs, LSS w/ assault cannon, stormhawk, and a storm talon (both with skyhammer missiles) and a 2nd tornado Link to comment https://bolterandchainsword.com/topic/323795-wars-raven-guard-raptors/#findComment-4440211 Share on other sites More sharing options...
WAR Posted July 11, 2016 Author Share Posted July 11, 2016 (edited) Sorry for the crappy phone pics...but here is the start. Bolter teams (plasticard suppressors, anvil industries scopes, sights, peq, and box mags, FW melta bomb on Sgt.....and lots of spare scout bits Shotgun team (halo sight anvil and lots of spare scout parts) Sniper team (peq anvil industries) Pre Suppressed Hvy Bolter Hvy Bolter suppressed 10th co Scouts and dread (updated pic Captain Voss of the 10th Co. the Right hand was replaced with a grenade hand Edited December 4, 2017 by war009 Race Bannon, airinhere, librisrouge and 2 others 5 Back to top Link to comment https://bolterandchainsword.com/topic/323795-wars-raven-guard-raptors/#findComment-4440320 Share on other sites More sharing options...
jpwyrm Posted July 12, 2016 Share Posted July 12, 2016 Great start war009! I really dig the Anvil Industry parts you added, it reinforce the Legendary Marksmen SR and the fact they don't have access to a full astartes auto-senses. Captain Voss is great - could even be used as a Lias Issodon stand-in when playing larger games. It's a shame there is no place for specialist HQs in 40k like there is in 30K - I could certainly see a 10th company captain using a special vox to call down artillery strike and coordinate reserves. Keep up the good work! WAR 1 Back to top Link to comment https://bolterandchainsword.com/topic/323795-wars-raven-guard-raptors/#findComment-4440727 Share on other sites More sharing options...
WAR Posted July 12, 2016 Author Share Posted July 12, 2016 (edited) I got side tracked yesterday and built a Epistolary Borak......should have built my LSS ot Tornados but I did build my 5th scout squad too.... I plan on doing a WIP soon so I'll post the link here Edit here is the link......mainly for me so i can find it easier http://www.bolterandchainsword.com/topic/323889-war009s-raptors-10th-company-wip-log/ Edited July 12, 2016 by war009 Link to comment https://bolterandchainsword.com/topic/323795-wars-raven-guard-raptors/#findComment-4440791 Share on other sites More sharing options...
WAR Posted July 19, 2016 Author Share Posted July 19, 2016 (edited) Got bored the past 2 nights and cranked some new models: 10th Co. Chaplain (yet to be named) Sternguard head, terminator crux terminatus (rosarius), Hersey Era Night lord Terror head, and B@C rest of the model. Chapter Master Lias Issoden, "The Grim". Raven Wing bike Command Head, FW MK IV Vox back back, MK IV power weapon set chest, MK III arms, Stern Guard Shoulder pad and knife, B@C legs, pouches, helmet, other shoulder pad, and bolter, Sniper Scout silencer and stock, Land Speeder storm camo cloak and bipod, catachan dagger (power sword sheathed) and anvil industries gun accessories I am still waiting on a few parts from Shapeways so I can start working on my predators and and an arm for my dreadnought. And I've been avoiding building my Land Speeder storm and Land Speeder tornado. Edited December 4, 2017 by war009 Nusquam 1 Back to top Link to comment https://bolterandchainsword.com/topic/323795-wars-raven-guard-raptors/#findComment-4446311 Share on other sites More sharing options...
Race Bannon Posted July 19, 2016 Share Posted July 19, 2016 Looks good :tu: As for Land Speeders ... I am not a fan of the models, yet when I made three in a row it really wasn't as bad as I thought. I recommend saving them up and busting all out in one shot. Kinda like removing a Band-Aid :lol: I'm curious what Shapeways had for vehicles? WAR 1 Back to top Link to comment https://bolterandchainsword.com/topic/323795-wars-raven-guard-raptors/#findComment-4446363 Share on other sites More sharing options...
WAR Posted July 19, 2016 Author Share Posted July 19, 2016 Looks good As for Land Speeders ... I am not a fan of the models, yet when I made three in a row it really wasn't as bad as I thought. I recommend saving them up and busting all out in one shot. Kinda like removing a Band-Aid I'm curious what Shapeways had for vehicles? Thank you sir. I klow i have a total of 2 LSS, 2Tornados, and a typhoon to build....GAHHH for my predators External fuel tanks Tools Smoke Dischargers Tank Barrels Plus I have a lot of stowage, random accessories, and modifications for them including these from Secret Weapons and Baal predator's hvy bolter sponsons and ammo bin for the rear of the turret. Link to comment https://bolterandchainsword.com/topic/323795-wars-raven-guard-raptors/#findComment-4446430 Share on other sites More sharing options...
Race Bannon Posted July 19, 2016 Share Posted July 19, 2016 Ok. It will be a new brand of heresy if pics are not shared of the tank(s). ;) Link to comment https://bolterandchainsword.com/topic/323795-wars-raven-guard-raptors/#findComment-4446441 Share on other sites More sharing options...
WAR Posted July 19, 2016 Author Share Posted July 19, 2016 oh they will be shared..... hopefully the shape ways parts are here thursday and I get the mold done for these soon too. Link to comment https://bolterandchainsword.com/topic/323795-wars-raven-guard-raptors/#findComment-4446445 Share on other sites More sharing options...
WAR Posted September 2, 2016 Author Share Posted September 2, 2016 (edited) So I got distracted with another game system but finally got around to working on my raptors again......and buying Deathwatch stuff Here is my new Predator designated Vulture I Front View Rear view Barrel Difference [ The barrel will have camo netting draped on it to on the front and some kind of identifier will be put on it to signify where I actually measure from. The other shapeway stuff i ordered was too small so I scrapped that idea. I still need to fill the bustle rack with stuff. I found more sand bags to add to it on top of the sponsons. And I need to add more gear to the turret add tracks and mount the hedgerow cutter. Edited December 4, 2017 by war009 Nusquam, Nostalgia and NiceGuyAdi 3 Back to top Link to comment https://bolterandchainsword.com/topic/323795-wars-raven-guard-raptors/#findComment-4488081 Share on other sites More sharing options...
Race Bannon Posted September 2, 2016 Share Posted September 2, 2016 Now that's a big gun! WAR 1 Back to top Link to comment https://bolterandchainsword.com/topic/323795-wars-raven-guard-raptors/#findComment-4488097 Share on other sites More sharing options...
WAR Posted September 6, 2016 Author Share Posted September 6, 2016 (edited) Well finally got stuff primed/ painted.......and the paint fuzzed on me.... busted out the steel wool and got them cleaned up....but broke some stuff in the process but all is fixable. Since I am still waiting on the bulk of my Deathwatch stuff for the B&C 2016 Deathwatch Painting Challenge to come in I have more time to work on my Raptors Army painter Color primer army green. Which now includes my rifleman Dreadnought. Edited December 4, 2017 by war009 duz_ 1 Back to top Link to comment https://bolterandchainsword.com/topic/323795-wars-raven-guard-raptors/#findComment-4493022 Share on other sites More sharing options...
Race Bannon Posted September 7, 2016 Share Posted September 7, 2016 There are some neat things happening in that pic, I'm curious for some sideways shots: the cupola gunner, librarian (?) and those models behind the tank specifically. Looking good otherwise :tu: Link to comment https://bolterandchainsword.com/topic/323795-wars-raven-guard-raptors/#findComment-4493510 Share on other sites More sharing options...
WAR Posted September 7, 2016 Author Share Posted September 7, 2016 (edited) That's the 10th company captain.....he kinda fell apart during the steel wool. But he is back together. Ill get some more pics posted today of the predator, Gunner and Librarian for you. Scouts Predator Dreadnought [ Unnamed 10th Co. Chaplain......need to undercoat him black but found my MK IV Night lord Helm Lias Issoden Librarian 10th Co. Captain Edited December 4, 2017 by war009 Nusquam and MithrilForge 2 Back to top Link to comment https://bolterandchainsword.com/topic/323795-wars-raven-guard-raptors/#findComment-4493557 Share on other sites More sharing options...
WAR Posted September 8, 2016 Author Share Posted September 8, 2016 (edited) There are some neat things happening in that pic, I'm curious for some sideways shots: the cupola gunner, librarian (?) and those models behind the tank specifically. Ask and you shall receive: Predator 10th Co. Captain Edited December 4, 2017 by war009 duz_ 1 Back to top Link to comment https://bolterandchainsword.com/topic/323795-wars-raven-guard-raptors/#findComment-4494210 Share on other sites More sharing options...
WAR Posted September 8, 2016 Author Share Posted September 8, 2016 (edited) Librarian Lias Edited December 4, 2017 by war009 Link to comment https://bolterandchainsword.com/topic/323795-wars-raven-guard-raptors/#findComment-4494213 Share on other sites More sharing options...
Race Bannon Posted September 8, 2016 Share Posted September 8, 2016 All of it really great. Frankly, the bike cowling for the gunner is a brilliant idea. WAR 1 Back to top Link to comment https://bolterandchainsword.com/topic/323795-wars-raven-guard-raptors/#findComment-4494234 Share on other sites More sharing options...
WAR Posted September 8, 2016 Author Share Posted September 8, 2016 I saw it in an OLD edition of White Dwarf during 3rd edition.....I used the biker scout cowling as I have extra ones due to building biker scouts with GLs. All 3 of my predators will have them. MithrilForge 1 Back to top Link to comment https://bolterandchainsword.com/topic/323795-wars-raven-guard-raptors/#findComment-4494255 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now