wiqid Posted May 6, 2017 Author Share Posted May 6, 2017 The weathering looks great, I'd vote on keeping it up. And if you're worried about the powders hiding the details too much, then go ahead and put the sealer on them and they get dulled down again. I guess I will be a little more measured with the battle damage this time round. Will also have to get that pigment fixer and see how that works out. Thanks for the tip mate. DC look brutal with the NL heads and are those Ashen Circle chain axes? That was the intended effect. Wanted them to look extra menacing since they are Flesh Tearers and Death Company. Should be brutal beyond reproach! and yea, those are Ashen Circle axes. Thought they would add more variation to their chained weapon repertoire. Now I just need to decide on whether to do another squad of terminators, sanguinary guard or a single character. Such indecision. Link to comment https://bolterandchainsword.com/topic/328574-flesh-tearers-wip-army/page/3/#findComment-4731926 Share on other sites More sharing options...
wiqid Posted May 7, 2017 Author Share Posted May 7, 2017 Just wanted to get some opinions on a few minor conversions I have in mind. What do you think of these "chainfists" that I would plan to run as counts as Lightning Claws, but with a Flesh Tearers feel. Still trying to figure out if they fit well. I'm still not 100% about the square-ish shape of the arms compared to the curved geometry of the terminator armor. Might consider reshaping/ filing edges down. What do you guys think? My idea of a slightly converted Sanguinary priest. I think the wingspan isn't too big and it seems to fit well with the mkiv jump pack. C&C welcome And last but not least, thought I would share an image of my newly built "office". Finally got some better storage shelves n racks and a bit more organised. Just need to get my Daylight Company tripple bright light. :cuss doesn't come cheap tho! Well anyway thanks for looking and have a good weekend folks. Time to going back to figure out what to paint before my son wakes up. Link to comment https://bolterandchainsword.com/topic/328574-flesh-tearers-wip-army/page/3/#findComment-4732404 Share on other sites More sharing options...
Augustus b'Raass Posted May 7, 2017 Share Posted May 7, 2017 This is a great army log. Your Flesh Tearers are coming along very, very nicely. Your speed is impressive! Five months for 50 marines or so is no small feat. I love how you've included elements of the FW Night Lords range, alluding to the heritage of the Flesh Tearers, which is whispered in the dark corners of the Imperium. Link to comment https://bolterandchainsword.com/topic/328574-flesh-tearers-wip-army/page/3/#findComment-4732413 Share on other sites More sharing options...
Spiritual Liege Posted May 7, 2017 Share Posted May 7, 2017 Simply awesome painting and modelling in general. Also, someone is envious of your working station Link to comment https://bolterandchainsword.com/topic/328574-flesh-tearers-wip-army/page/3/#findComment-4732698 Share on other sites More sharing options...
wiqid Posted May 7, 2017 Author Share Posted May 7, 2017 This is a great army log. Your Flesh Tearers are coming along very, very nicely. Your speed is impressive! Five months for 50 marines or so is no small feat. I love how you've included elements of the FW Night Lords range, alluding to the heritage of the Flesh Tearers, which is whispered in the dark corners of the Imperium. I'm glad you like what you see. It's my first attempt at trying to document my efforts. After getting back into the hobby n buying a snowball of minis, I thought this might be the best course of action to commit my efforts. Done around 80 now, but seeing the army take shape motivates me. Glad you like to Night Lord additions. Flesh Tearers are renowned for their savagery, so I felt it was in character! Simply awesome painting and modelling in general. Also, someone is envious of your working station Haha my son gets envious of the work station too. God help me when he learns to climb better. Thanks for the words of support :) Think I might work on Sanguinary Priest next. Change of pace compared to painting up squads. Stay tuned :) Link to comment https://bolterandchainsword.com/topic/328574-flesh-tearers-wip-army/page/3/#findComment-4732784 Share on other sites More sharing options...
Rangaman Posted May 7, 2017 Share Posted May 7, 2017 Your Flesh Tearers look fantastic mate! Rich colours but not overdone and beautiful weathering make for some very visually appealing models. Link to comment https://bolterandchainsword.com/topic/328574-flesh-tearers-wip-army/page/3/#findComment-4732971 Share on other sites More sharing options...
wiqid Posted May 8, 2017 Author Share Posted May 8, 2017 Your Flesh Tearers look fantastic mate! Rich colours but not overdone and beautiful weathering make for some very visually appealing models. Thanks mate. I still get a bit hesitant when it comes to weathering. Not quite experienced with the technique and always think twice about how I might otherwise ruin my paint job. Will have to practice it more for the next 30k project which will require a more grim dark feel. I didn't get round to painting anything else just yet. Instead I have been busy trying to tinker around with character conversions. Completed one of my planned two Sanguinary Priests. Most of the pieces are held with bluetac. I went for this rebreather head, since I didn't feel the original sang priest head was menacing enough. Am planning to attempt at making a bloodied puddle and blood drops from the chalice with water effect medium. "Let the dripping blood feed our rage!" And of course, no Flesh Tearers chapter would be complete without the legend that is Nassir Amit . He is almost done, I am just waiting on ammo chain bits I ordered to try and fit to his mounted stormbolters. I tried to interpret how his chainfist stormbolters would look going by the only image found on this novela Decided to go with this variant rather than the other option of scratch building the mounted bolters. I tried to portray his brutal characters as best I can with the bitz I had laying about. Just need to add some scratches,holes and battle damage to his armor and a few other tweeks. "Nassir Amit was notorious among the Blood Angels for both his savage and brutally honest nature. The Primarch Sanguinius valued his honest nature, as Amit would always speak the truth, even when others would be stopped by decorum.[1a] His savage aspect in battle was also known, to the point that he was dubbed "the Flesh Tearer" by his battle-brothers. Far from denying the epithet, he embraced it,[1b] arming himself and his brothers in the Fifth Company with custom serrated flaying knives.[1c] Amit did what he believed to be right, even if went against Legion law, having little fear of the Warden" Had a tonne of fun converting these guys. What do you guys think, C&C welcome as always. Link to comment https://bolterandchainsword.com/topic/328574-flesh-tearers-wip-army/page/3/#findComment-4733314 Share on other sites More sharing options...
Bob Hunk Posted May 8, 2017 Share Posted May 8, 2017 Just wanted to get some opinions on a few minor conversions I have in mind. What do you think of these "chainfists" that I would plan to run as counts as Lightning Claws, but with a Flesh Tearers feel. Still trying to figure out if they fit well. I'm still not 100% about the square-ish shape of the arms compared to the curved geometry of the terminator armor. Might consider reshaping/ filing edges down. Haha, yeah those are really cool! :) Very Flesh Tearers! Although I'd be more inclined to run them as chain fists rather than lightning claws, to avoid confusion. Link to comment https://bolterandchainsword.com/topic/328574-flesh-tearers-wip-army/page/3/#findComment-4733372 Share on other sites More sharing options...
malcharion Posted May 8, 2017 Share Posted May 8, 2017 Most beautiful Death Company I've seen so far ! Nice choice of bitz and great painting, they look ace ! Keep it comming ;) Link to comment https://bolterandchainsword.com/topic/328574-flesh-tearers-wip-army/page/3/#findComment-4733464 Share on other sites More sharing options...
wiqid Posted July 14, 2017 Author Share Posted July 14, 2017 Hey all. Sorry for the lack of updates as I haven't had much time to paint any new additions. Have been busy with the birth of my baby daughter, so everything fell to the wayside as expected. My little sister of battle has arrived! I finally had some time lately to work on my army. Haven't managed to paint as I got carried away with toying with conversion ideas. Got some inspiration of how to convert my land raider from a similar idea I found here, tho I can't find the link to attribute credit. Tweaked it a little and would like to know what you guys think. Just need to add some battle damage n think I am about done with the LR. Link to comment https://bolterandchainsword.com/topic/328574-flesh-tearers-wip-army/page/3/#findComment-4819661 Share on other sites More sharing options...
Bjorn Firewalker Posted July 14, 2017 Share Posted July 14, 2017 I like the Land Raider Achilles with the giant buzzsaw blades- so Flesh Tearers-y. Where did you get them? Will you add them to other vehicles? Link to comment https://bolterandchainsword.com/topic/328574-flesh-tearers-wip-army/page/3/#findComment-4819665 Share on other sites More sharing options...
terminatorAM Posted July 15, 2017 Share Posted July 15, 2017 I suppose that's one answer to vehicles getting close combat attacks 8) Seriously, it looks great. Nice plastic card work Link to comment https://bolterandchainsword.com/topic/328574-flesh-tearers-wip-army/page/3/#findComment-4819792 Share on other sites More sharing options...
wiqid Posted July 15, 2017 Author Share Posted July 15, 2017 I like the Land Raider Achilles with the giant buzzsaw blades- so Flesh Tearers-y. Where did you get them? Will you add them to other vehicles? Glad you guys like them. As terminatorAM pointed out, I scratch built the buzz blades with plastic card and the hydro arms with plastic tube and bits I had lying around. I don't have much vehicles aside from 2 preds, stormraven and drop pods. If I incorporate similar conversions, will have to be on a scratch built/ kit bashed dozer blade for the preds. Don't think stormraven having em would make sense. Maybe for decorative purposes on the fins of the pods. Not sure. Thanks for the feedback and encouraging words! Will be working on some character conversions next. Link to comment https://bolterandchainsword.com/topic/328574-flesh-tearers-wip-army/page/3/#findComment-4819860 Share on other sites More sharing options...
Vairocanum Posted July 15, 2017 Share Posted July 15, 2017 WOW that is a phenomenal upgrade! Can't wait to see it painted up! Link to comment https://bolterandchainsword.com/topic/328574-flesh-tearers-wip-army/page/3/#findComment-4819878 Share on other sites More sharing options...
wiqid Posted July 18, 2017 Author Share Posted July 18, 2017 Hey folks. Just finished up some conversion work on various characters for my Flesh Tearers army. Most are pretty much done, aside from some additional work on Mephiston and building up a sanguinary priest (previous priest conversion will double as Corbulo). I also managed to finish up some assault terminators (with counts as lightning claws flesh tearers style). Got some 3d printed shoulder pads for em, though I need to convert the left shoulder pad of the captain still to match the squad. Well without further due, here are the lads. Just need to magnetize some bits n bobs and will commence the arduous task of painting all this army n hopefully doing them some justice. Comments and feedback are welcome and appreciated as always! Assault Terminator Squad Counts as Lemartes/ Death Company Chaplain Flesh Tearers Librarian Nuriel Sanguinor, Exemplar of the Host Commander Dante Lord Mephiston Link to comment https://bolterandchainsword.com/topic/328574-flesh-tearers-wip-army/page/3/#findComment-4823970 Share on other sites More sharing options...
Mr Yellow Posted July 18, 2017 Share Posted July 18, 2017 That Land raider achilles is a really neat conversion; very appropriate for the flesh tearers. I also really like the assault terminators, those fists look really well done, how did you manage that? Cheers LM Link to comment https://bolterandchainsword.com/topic/328574-flesh-tearers-wip-army/page/3/#findComment-4823995 Share on other sites More sharing options...
Bjorn Firewalker Posted July 18, 2017 Share Posted July 18, 2017 The modified Sanguinor and Mephiston look great. I notice Dante lacks a jump pack. Will you make him Infantry instead of Jump Infantry? Do you plan to kitbash a winged jump pack for him? Link to comment https://bolterandchainsword.com/topic/328574-flesh-tearers-wip-army/page/3/#findComment-4824132 Share on other sites More sharing options...
Pyroclast91 Posted July 18, 2017 Share Posted July 18, 2017 the buzz saw fists are possibly the greatest thing I've ever seen I NEED SOME this army is looking awesome so far consider me subbed Link to comment https://bolterandchainsword.com/topic/328574-flesh-tearers-wip-army/page/3/#findComment-4824144 Share on other sites More sharing options...
Vairocanum Posted July 19, 2017 Share Posted July 19, 2017 Great update, lots of cool new models. Mephiston is my favorite of the bunch, really well done, looking forward to seeing him completed! Link to comment https://bolterandchainsword.com/topic/328574-flesh-tearers-wip-army/page/3/#findComment-4824359 Share on other sites More sharing options...
wiqid Posted July 19, 2017 Author Share Posted July 19, 2017 Thanks for all the feedback folks. I'm glad you guys are liking what I have finished thus far. Just a few more conversions and I can get to the daunting task of painting the rest of this army up. Hopefully I can finish the army by the end of the year while doing them justice! @Pyroclast91 & LamenterMarine The buzzsaw fists are from puppetswar. I wasn't too happy with the original look of them as they had square geometry n hard edges. So I filed down most of the surfaces to fit with the rest of the contoured curvature of the armor. @Bjorn Oh yea. I forgot to add his JP lol. He basically has a winged pre heresey JP (mark 2 i think), exactly the same design as my sang priest/ Corbulo pictured in a previous post. Death from the skies is essential :) @Vairocanum Mephiston is the one conversion I really am putting a lot of work into. First time really sculpting. So there is a lot of trial and error and trepidation with what I am doing. The robe n cape are the trickiest parts with this in mind. Thanks again for the CC folks. Hope to have a completed Mephiston done later this week. Hopefully it does this infamous legend some justice. Link to comment https://bolterandchainsword.com/topic/328574-flesh-tearers-wip-army/page/3/#findComment-4825169 Share on other sites More sharing options...
Race Bannon Posted July 19, 2017 Share Posted July 19, 2017 I wondered how Cataog0be shoulder pads looked on Indomitus bodies :tu: Link to comment https://bolterandchainsword.com/topic/328574-flesh-tearers-wip-army/page/3/#findComment-4825197 Share on other sites More sharing options...
wiqid Posted July 21, 2017 Author Share Posted July 21, 2017 Quick update. Finally got round to finishing off my Mephiston conversion. Took a bit longer than expected after a number of failed attempts at making robes. Shaping folds proved trickier than expected and had to scrap a few attempts. Ended up with a simpler look for the robes n cloak. Will have to work on learning how to do more elaborate shapes and folds on the next conversion. Think I am more or less done with this army. Unless I decide to convert some bikes and add them to the army. Time to deliberate. Thanks for looking guys. CnC appreciated. Link to comment https://bolterandchainsword.com/topic/328574-flesh-tearers-wip-army/page/3/#findComment-4827576 Share on other sites More sharing options...
wiqid Posted October 4, 2017 Author Share Posted October 4, 2017 Just a quick blog update. After countless stops n starts over the last few months, finally managed to get a squad done. Hope to get some better pics of the minis at a later date. CnC welcome. Link to comment https://bolterandchainsword.com/topic/328574-flesh-tearers-wip-army/page/3/#findComment-4902333 Share on other sites More sharing options...
Vairocanum Posted October 4, 2017 Share Posted October 4, 2017 Oh man, I totally missed Mephiston back in July. He looks awesome completed, the GS work looks great! And the terminator squad is looking so cool with the custom chainfists, very fitting for the flesh tearers! Looking forward to seeing more! Link to comment https://bolterandchainsword.com/topic/328574-flesh-tearers-wip-army/page/3/#findComment-4902376 Share on other sites More sharing options...
Sagentus Posted October 4, 2017 Share Posted October 4, 2017 Mephiston looks great, looking forward to seeing him painted. The termies look epic now painted, great job all round! Link to comment https://bolterandchainsword.com/topic/328574-flesh-tearers-wip-army/page/3/#findComment-4902612 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.