Calyptra Posted October 9, 2017 Share Posted October 9, 2017 My Cronos so far: Action shot! I wrote a thing in my project log, so if you're interested in reading about my deep and personal struggle with painting a Cronos (spoiler: there's too much purple in the flesh tones), you can read about it there. WarriorFish, Trokair, walter h and 1 other 4 Back to top Link to comment https://bolterandchainsword.com/topic/338953-xeno-community-event/page/5/#findComment-4905159 Share on other sites More sharing options...
fisheyedbunny Posted October 10, 2017 Share Posted October 10, 2017 (edited) So I have finally settled (I think) on a camo scheme for the Tau forces I will be doing. Done the test scheme on the Riptide and I felt it was far to bright. I was going for a night/urban theme. I decided to flip the colours and end with the darkest colour this time. The two Ghostkeel plates you can see were done this way however the pictures show them just airbrushed. Still to be drybrushed/washed etc. I think the darker grey in the new camo scheme is just a shade to dark however I will address this with some of the drybrushing to bring the black more in line...in theory Loving the work so far loads of cracking pictures and great work, need to get my finger out of my backside EDIT - Also changed from Digital to Hex camo, felt it was more Tau somehow, don't ask me why tho, my mind works in the strangest of ways Edited October 10, 2017 by fisheyedbunny elmo, robofish7591, Parweke and 2 others 5 Back to top Link to comment https://bolterandchainsword.com/topic/338953-xeno-community-event/page/5/#findComment-4905350 Share on other sites More sharing options...
Guest Triszin Posted October 10, 2017 Share Posted October 10, 2017 So I have finally settled (I think) on a camo scheme for the Tau forces I will be doing. Done the test scheme on the Riptide and I felt it was far to bright. I was going for a night/urban theme. I decided to flip the colours and end with the darkest colour this time. The two Ghostkeel plates you can see were done this way however the pictures show them just airbrushed. Still to be drybrushed/washed etc. they look fantastic. what stencils did you use? ------------------------------------------- some of my tau are based, and figuring out the scheme right now. breacher team commander: (still have to build his drones) WIP Drone controller: Link to comment https://bolterandchainsword.com/topic/338953-xeno-community-event/page/5/#findComment-4905623 Share on other sites More sharing options...
fisheyedbunny Posted October 10, 2017 Share Posted October 10, 2017 Hey Triszin I used the Anarchy Models HD Stencils. I am on a work PC so unable to get the hyperlink to work but have typed below and also some pictures of them: http://www.anarchymodels.co.uk Link to comment https://bolterandchainsword.com/topic/338953-xeno-community-event/page/5/#findComment-4905984 Share on other sites More sharing options...
Uprising Posted October 12, 2017 Author Share Posted October 12, 2017 I just want to say great job everyone, you make me proud to be hosting the event. fisheyedbunny and WarriorFish 2 Back to top Link to comment https://bolterandchainsword.com/topic/338953-xeno-community-event/page/5/#findComment-4906917 Share on other sites More sharing options...
fisheyedbunny Posted October 12, 2017 Share Posted October 12, 2017 Some more WIP, Ghostkeel has been my main area of focus but I have also completed most of the work on the Fire Warriors. I think/hope the minimal detailing and the darker colours suit the overall theme of the Urban/Night style. There is still some odds and sods to be done as well as the basing on it. The helmet is no where near as white in real life, will need to get my lightbox set up again. elmo, WarriorFish and Trokair 3 Back to top Link to comment https://bolterandchainsword.com/topic/338953-xeno-community-event/page/5/#findComment-4906960 Share on other sites More sharing options...
WarriorFish Posted October 12, 2017 Share Posted October 12, 2017 I've been making steady progress, but I got side tracked by a single model He's almost complete though so not in vain :) Evening painting isn't great but I have next week off to get some serious painting done Keep up the good work everyone, and keep those updates posted! elmo, robofish7591, brettfp and 3 others 6 Back to top Link to comment https://bolterandchainsword.com/topic/338953-xeno-community-event/page/5/#findComment-4907585 Share on other sites More sharing options...
brettfp Posted October 12, 2017 Share Posted October 12, 2017 Here's the WIP of my Stormboyz fisheyedbunny, walter h and WarriorFish 3 Back to top Link to comment https://bolterandchainsword.com/topic/338953-xeno-community-event/page/5/#findComment-4907687 Share on other sites More sharing options...
E_50_Panzer Posted October 14, 2017 Share Posted October 14, 2017 (edited) Alrighty, I had a few free hours t'day, so I got to work on the wyches. Stripped, based, primed, and a few with the first layers of basecoats started - really messy if I do say so myself. Edited October 14, 2017 by Archon Yllithian WarriorFish 1 Back to top Link to comment https://bolterandchainsword.com/topic/338953-xeno-community-event/page/5/#findComment-4908593 Share on other sites More sharing options...
The_Chaplain Posted October 14, 2017 Share Posted October 14, 2017 Just waiting on my order of paint to arrive then I can start painting in earnest. Link to comment https://bolterandchainsword.com/topic/338953-xeno-community-event/page/5/#findComment-4908873 Share on other sites More sharing options...
elmo Posted October 14, 2017 Share Posted October 14, 2017 There is frantic priming going on in the background on DF(1) /HH (3) / SR (2) - (I got a little carried away... I only vowed 1... :() and the 'Cuda but I can show you the WIP so far on the Riptide :) WarriorFish, robofish7591, E_50_Panzer and 2 others 5 Back to top Link to comment https://bolterandchainsword.com/topic/338953-xeno-community-event/page/5/#findComment-4908950 Share on other sites More sharing options...
Trokair Posted October 14, 2017 Share Posted October 14, 2017 Calyptra, that Cronos looks good so far. There are quite a few Dark Eldar models I always liked the look of but that is an army I am yet to collect any off. Looking forward to seeing it finished. Fisheyedbunny, Nice work on the Ghostkeel WarriorFish, that Slyth is gorgeous. Elmo, what green is that? Calyptra, WarriorFish and fisheyedbunny 3 Back to top Link to comment https://bolterandchainsword.com/topic/338953-xeno-community-event/page/5/#findComment-4909103 Share on other sites More sharing options...
elmo Posted October 15, 2017 Share Posted October 15, 2017 Black primer, Army Painter Angel Green with Goblin Green drybrush. ;) Trokair and walter h 2 Back to top Link to comment https://bolterandchainsword.com/topic/338953-xeno-community-event/page/5/#findComment-4909259 Share on other sites More sharing options...
brettfp Posted October 15, 2017 Share Posted October 15, 2017 Got another buggy built 'Skull Squisha' I'm about halfway through painting the stormboyz, I think I'll wait until I've painted this and to put up photos :) walter h, Kierdale, WarriorFish and 2 others 5 Back to top Link to comment https://bolterandchainsword.com/topic/338953-xeno-community-event/page/5/#findComment-4909662 Share on other sites More sharing options...
Calyptra Posted October 16, 2017 Share Posted October 16, 2017 Another week of work on the Cronos. Action shot! Thoughts, commentary, and list of all the parts I've accidentally snapped off this model (so far) can be found in my project log. E_50_Panzer, WarriorFish, Warhead01 and 1 other 4 Back to top Link to comment https://bolterandchainsword.com/topic/338953-xeno-community-event/page/5/#findComment-4910234 Share on other sites More sharing options...
Marcus Arias Posted October 16, 2017 Share Posted October 16, 2017 A WIP Warlock to test out the colour scheme before I commit: still a bit to go before I am satisfied with him! Calyptra, Dosjetka, WarriorFish and 3 others 6 Back to top Link to comment https://bolterandchainsword.com/topic/338953-xeno-community-event/page/5/#findComment-4910260 Share on other sites More sharing options...
Studio Silvernale Posted October 16, 2017 Share Posted October 16, 2017 Testing a color scheme for my "counts as" mandrakes.. WarriorFish and Warhead01 2 Back to top Link to comment https://bolterandchainsword.com/topic/338953-xeno-community-event/page/5/#findComment-4910295 Share on other sites More sharing options...
Marshal Wolfhart Posted October 16, 2017 Share Posted October 16, 2017 Finally got around to getting a wip pic. As stated above (pg2) my guardians were too far along, as I got impatient and painted them before taking wip pics So here goes: 2 Warlocks, 5 Dark Reapers: WarriorFish and Trokair 2 Back to top Link to comment https://bolterandchainsword.com/topic/338953-xeno-community-event/page/5/#findComment-4910452 Share on other sites More sharing options...
Sabadin Posted October 22, 2017 Share Posted October 22, 2017 Finally got my pics so i can get started. Ignore the current paint on the broodlord, was painting him as Spawn of Cryptus, since that's not a thing now he's getting the retro scheme. WarriorFish 1 Back to top Link to comment https://bolterandchainsword.com/topic/338953-xeno-community-event/page/5/#findComment-4914630 Share on other sites More sharing options...
Sviar Posted October 22, 2017 Share Posted October 22, 2017 Does Epic count? Link to comment https://bolterandchainsword.com/topic/338953-xeno-community-event/page/5/#findComment-4914895 Share on other sites More sharing options...
Studio Silvernale Posted October 22, 2017 Share Posted October 22, 2017 Wyche squad done. These were Raging Heroes' pre-TGG2 kickstarter and their quality wasn't as good as the newer stuff. WarriorFish 1 Back to top Link to comment https://bolterandchainsword.com/topic/338953-xeno-community-event/page/5/#findComment-4915028 Share on other sites More sharing options...
Uprising Posted October 22, 2017 Author Share Posted October 22, 2017 Does Epic count? I am going to say why not. The more painted miniatures the better. Go for it. Sviar 1 Back to top Link to comment https://bolterandchainsword.com/topic/338953-xeno-community-event/page/5/#findComment-4915100 Share on other sites More sharing options...
Calyptra Posted October 24, 2017 Share Posted October 24, 2017 (in)action shot fisheyedbunny, E_50_Panzer, Sviar and 3 others 6 Back to top Link to comment https://bolterandchainsword.com/topic/338953-xeno-community-event/page/5/#findComment-4916063 Share on other sites More sharing options...
Sviar Posted October 24, 2017 Share Posted October 24, 2017 Thanks Uprising. I Sviar, one of the slowest painter on the B&C vow to paint: 10 Orks with sluggas and Dakkas 1 Ork Painboy 1 Ork Stompa- Epic Starting pictures coming soon. WarriorFish 1 Back to top Link to comment https://bolterandchainsword.com/topic/338953-xeno-community-event/page/5/#findComment-4916080 Share on other sites More sharing options...
Sabadin Posted October 25, 2017 Share Posted October 25, 2017 And then some paint happened, forgot how much longer edge highlighting takes instead of the drybrushing approach on my regular nids. These guys are just going to be basic tabletop standard, will be aiming to take the broodlord to a much higher level though. E_50_Panzer, WarriorFish and Sviar 3 Back to top Link to comment https://bolterandchainsword.com/topic/338953-xeno-community-event/page/5/#findComment-4916709 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now