Wulfsheade Posted January 12, 2020 Share Posted January 12, 2020 (edited) I've updated my Shapeways store with lots of new weapons for anyone looking for parts to convert their models with. All of the new parts are weapons, some based off old Rogue Trader-era weapons, some newer. There are also more parts for the Angry Marine players added as well! Check them out here:https://www.shapeways.com/shops/wulfsheade-miniatures?sort=newest Here's a pic so you can see some of what's been added: Edited October 30 by Wulfsheade Title & tags BLACK BLŒ FLY, Joe, GalaxyChief and 8 others 11 Back to top Link to comment Share on other sites More sharing options...
DutyBeforeAll Posted January 12, 2020 Share Posted January 12, 2020 Dude, if you make umbra pattern bolters I’ll take a couple sets. Hungry Nostraman Lizard 1 Back to top Link to comment Share on other sites More sharing options...
Wulfsheade Posted January 12, 2020 Author Share Posted January 12, 2020 Dude, if you make umbra pattern bolters I’ll take a couple sets. Are the Umbra Pattern Bolters the ones the original Beakies held? If so I can knock one out tomorrow. I'll post a notice when I have it done. mel_danes and DutyBeforeAll 2 Back to top Link to comment Share on other sites More sharing options...
Kierdale Posted January 12, 2020 Share Posted January 12, 2020 Beautiful stuff! :tu: Link to comment Share on other sites More sharing options...
armarnis Posted January 12, 2020 Share Posted January 12, 2020 Too bad the breaches on the bolters dont line up with the barrel :P But VERY true to the 2nd edition heavy weapons, lovely. Would like to see some real footage Brother-serpent Tylydox 1 Back to top Link to comment Share on other sites More sharing options...
Petitioner's City Posted January 12, 2020 Share Posted January 12, 2020 These are lovely, esp for retro use in necromunda and Inq28, but unfortunately quite pricey. Link to comment Share on other sites More sharing options...
Joe Posted January 12, 2020 Share Posted January 12, 2020 Less common Imperial Guard equipment would be a fantastic addition. Love what's there so far! Link to comment Share on other sites More sharing options...
m_r_parker Posted January 12, 2020 Share Posted January 12, 2020 Yeah, whilst nice it's very pricey when compared to ForgeWorld. I'm in the UK, so I know FW pricing structure is better for me than abroad, but these come across as a very expensive option for very similar parts. 5x Meltaguns for £9.15 vs ForgeWorld's 10x at £13. Even more so for the heavy weapons, where a single weapon is £8.23 and doesn't come with any arms of backpacks. FW still do the classic 'Over the Shoulder' heavy weapons (4x weapons, one of each) for £14 and includes the compatible arms and backpacks. Maybe this is more competitively priced outside of the UK, but for me FW feels the better priced option. Petitioner's City 1 Back to top Link to comment Share on other sites More sharing options...
RedFox Posted January 12, 2020 Share Posted January 12, 2020 Suggestion: vostroyan lasgun Link to comment Share on other sites More sharing options...
Wulfsheade Posted January 12, 2020 Author Share Posted January 12, 2020 Too bad the breaches on the bolters dont line up with the barrel Yeah, I know! But I based them off the artwork, so.. :) Suggestion: vostroyan lasgun Yeah, I did forget about that style. I'll add that to the list for later additions. Less common Imperial Guard equipment would be a fantastic addition. Love what's there so far! Like what kind of equipment? Can you give me an idea of what you are looking for? These are lovely, esp for retro use in necromunda and Inq28, but unfortunately quite pricey. I know, but right now Shapeways is the best way I can get these up for sale right now. BLACK BLŒ FLY and RedFox 2 Back to top Link to comment Share on other sites More sharing options...
wraithman Posted January 15, 2020 Share Posted January 15, 2020 Too bad the breaches on the bolters dont line up with the barrel Yeah, I know! But I based them off the artwork, so.. Suggestion: vostroyan lasgun Yeah, I did forget about that style. I'll add that to the list for later additions. Less common Imperial Guard equipment would be a fantastic addition. Love what's there so far! Like what kind of equipment? Can you give me an idea of what you are looking for? These are lovely, esp for retro use in necromunda and Inq28, but unfortunately quite pricey. I know, but right now Shapeways is the best way I can get these up for sale right now. Vostroyan Long-las would be cool, but I'd like to see old-fashioned autoguns like what the Rogue Trader figs had (including some old Space marine minis I have.. I'd love to see some Squats or, at least their gear. Link to comment Share on other sites More sharing options...
Master Sheol Posted January 16, 2020 Share Posted January 16, 2020 Too bad the breaches on the bolters dont line up with the barrel Yeah, I know! But I based them off the artwork, so.. Suggestion: vostroyan lasgun Yeah, I did forget about that style. I'll add that to the list for later additions. Less common Imperial Guard equipment would be a fantastic addition. Love what's there so far! Like what kind of equipment? Can you give me an idea of what you are looking for? These are lovely, esp for retro use in necromunda and Inq28, but unfortunately quite pricey. I know, but right now Shapeways is the best way I can get these up for sale right now. Vostroyan Long-las would be cool, but I'd like to see old-fashioned autoguns like what the Rogue Trader figs had (including some old Space marine minis I have.. I'd love to see some Squats or, at least their gear. Yes... Squat gear to use with kharadron minis ;) MithrilForge 1 Back to top Link to comment Share on other sites More sharing options...
Joe Posted January 16, 2020 Share Posted January 16, 2020 Less common Imperial Guard equipment would be a fantastic addition. Love what's there so far!Like what kind of equipment? Can you give me an idea of what you are looking for? There's quite a broad range of different pattern equipment that'd be fantastic for conversions. I've done a small library below. \o Lascarbine. Lasgun from Inquisitor. Longlas from Inquisitor. Necromunda Lasgun. Lexington 1 Back to top Link to comment Share on other sites More sharing options...
Lucerne Posted January 16, 2020 Share Posted January 16, 2020 Have you considered doing the chaos space marine boltguns from relic's space marine game, or the Vengeance launcher? Brother Cruoris 1 Back to top Link to comment Share on other sites More sharing options...
Snazzy Posted January 16, 2020 Share Posted January 16, 2020 A nice combi-plasma would be great. I need tons of those. Link to comment Share on other sites More sharing options...
Wulfsheade Posted January 19, 2020 Author Share Posted January 19, 2020 Have you considered doing the chaos space marine boltguns from relic's space marine game, or the Vengeance launcher? Actually I didn't think about making Chaos Specific weapons, but that's something I can add. I'm currently working on a set of Sci-fi Buildings for my next Kickstarter, so I'll probably wait till that's done to start on more weapons. BLACK BLŒ FLY and Lucerne 2 Back to top Link to comment Share on other sites More sharing options...
Wulfsheade Posted May 7, 2020 Author Share Posted May 7, 2020 Less common Imperial Guard equipment would be a fantastic addition. Love what's there so far!Like what kind of equipment? Can you give me an idea of what you are looking for? There's quite a broad range of different pattern equipment that'd be fantastic for conversions. I've done a small library below. \o oiler] Lasgun from Inquisitor. Longlas from Inquisitor. LOL, I sculpted those two Inquisitor lasguns for Forge World years ago! BLACK BLŒ FLY, Sandlemad, Commissar Molotov and 6 others 9 Back to top Link to comment Share on other sites More sharing options...
Brother-Chaplain Kage Posted May 7, 2020 Share Posted May 7, 2020 Would love to have some Necromunda pattern lasguns for my Escher gang (I kinda-sorta converted one and it was a major PITA), but not at Shapeways prices. And pretty much every 3rd party gun I've seen for 40k that came from Shapeways looked awful. Not the modeling, mind you, but the printing. Vostroyan lasguns would be cool as well, but I think a major problem most people wishing for them are overlooking is that the distinctive curved handle won't work with normal gun-gripping hands. Link to comment Share on other sites More sharing options...
Wulfsheade Posted May 8, 2020 Author Share Posted May 8, 2020 Would love to have some Necromunda pattern lasguns for my Escher gang (I kinda-sorta converted one and it was a major PITA), but not at Shapeways prices. And pretty much every 3rd party gun I've seen for 40k that came from Shapeways looked awful. Not the modeling, mind you, but the printing. Vostroyan lasguns would be cool as well, but I think a major problem most people wishing for them are overlooking is that the distinctive curved handle won't work with normal gun-gripping hands. I am looking into offering the STL files separately, but can't use Shapeways for that. They allow downloads of the STL files, but not the sale (as far as I can tell). So I'll probably add the STL files to my Gumroad shop. https://gumroad.com/wulfsheademiniatures mel_danes and Lucerne 2 Back to top Link to comment Share on other sites More sharing options...
Wulfsheade Posted May 10, 2020 Author Share Posted May 10, 2020 I uploaded all the STL files for the Eldar-Style Outpost on my Gumroad page, so you can purchase them individually rather than the whole set. You can check them out here: https://gumroad.com/wulfsheademiniatures ShibeKing, Dwango, Papewaio and 3 others 6 Back to top Link to comment Share on other sites More sharing options...
barek Posted May 10, 2020 Share Posted May 10, 2020 Terminator combiplasma? Link to comment Share on other sites More sharing options...
Wulfsheade Posted May 11, 2020 Author Share Posted May 11, 2020 Would love to have some Necromunda pattern lasguns for my Escher gang (I kinda-sorta converted one and it was a major PITA), but not at Shapeways prices. And pretty much every 3rd party gun I've seen for 40k that came from Shapeways looked awful. Not the modeling, mind you, but the printing. Vostroyan lasguns would be cool as well, but I think a major problem most people wishing for them are overlooking is that the distinctive curved handle won't work with normal gun-gripping hands. I went ahead an made one. I know you don't like Shapeways, but at least there is one available. I'm also making a Vostroyan Pattern one as well and should have that uploaded later tonight. Doctor Perils and Naryn 2 Back to top Link to comment Share on other sites More sharing options...
Wulfsheade Posted May 17, 2020 Author Share Posted May 17, 2020 I started hashing out a mausoleum-style bunker for the Necron scenery set I'm working on. I took some inspiration from Egyptian architecture for it. This is just a WIP, I still have more work to do, but I like how it's turning out so far. I think the spires on the sides need to be a bit larger, and taller. The Ergonomic Enginseer, Tyriks and NTaW 3 Back to top Link to comment Share on other sites More sharing options...
Tyriks Posted May 17, 2020 Share Posted May 17, 2020 Wow! Ties in with a Monolith but still looks distinct. Very cool! Link to comment Share on other sites More sharing options...
NTaW Posted May 17, 2020 Share Posted May 17, 2020 This is very cool. What are the dimensions of the spires? They look fairly beefy but it's hard to tell size compared to the model on the roof from this angle. Could another solution be to have them on the back of the building as well for a bit of a crown look? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now