Xirix Posted June 10 Share Posted June 10 I've wanted both these lads in plastic since Imperial Armour Volume 2, glad I can finally get my hands on them. :) roryokane 1 Back to top Link to comment https://bolterandchainsword.com/topic/386077-tarantulas-and-rapiers-on-pre-order-june-14th/page/2/#findComment-6115171 Share on other sites More sharing options...
Mmmmm Napalm Posted June 10 Share Posted June 10 18 hours ago, Corswain said: It looks like a couple of them have holstered bolt guns - I am keen to add those to my bits box. I had the same thought. Also, there's one that's unholstered and slung over the arm: Looks like the Tigris pattern bolter hasn't undergone too many changes, much like its pistol counterpart. The front handguard looks a bit bulkier than the bolters in the 2015 Mk. IV tac squad, but from this angle i don't notice any other substantial differences. LameBeard 1 Back to top Link to comment https://bolterandchainsword.com/topic/386077-tarantulas-and-rapiers-on-pre-order-june-14th/page/2/#findComment-6115172 Share on other sites More sharing options...
The Praetorian of Inwit Posted June 10 Share Posted June 10 I'm not a fan of Rapiers but in the beautiful yellow of the VIIth they do look good. The Astartes themselves are quite interesting. Could be good for bits and using to mix up other Squads. Link to comment https://bolterandchainsword.com/topic/386077-tarantulas-and-rapiers-on-pre-order-june-14th/page/2/#findComment-6115177 Share on other sites More sharing options...
01RTB01 Posted June 13 Author Share Posted June 13 https://www.warhammer-community.com/en-gb/articles/uhpg6wrx/rapiers-and-tarantulas-painted-by-members-of-the-warhammer-design-studio/ What do we think, 50/60mm bases? Link to comment https://bolterandchainsword.com/topic/386077-tarantulas-and-rapiers-on-pre-order-june-14th/page/2/#findComment-6116019 Share on other sites More sharing options...
Nephaston Posted June 13 Share Posted June 13 I quite like them on 60mm, but 50mm might be less obstructive, strictly gameplay-wise 01RTB01 1 Back to top Link to comment https://bolterandchainsword.com/topic/386077-tarantulas-and-rapiers-on-pre-order-june-14th/page/2/#findComment-6116021 Share on other sites More sharing options...
01RTB01 Posted June 13 Author Share Posted June 13 57 minutes ago, Nephaston said: I quite like them on 60mm, but 50mm might be less obstructive, strictly gameplay-wise I must confess I hadn't twigged there were examples of both in the article. Tis very early here still lol. On this basis it'll be 60s. They look much better for it. The 50s look too small. Also means the rapiers should be bigger than the current resin versions and this would also explain the price point too. I've gone for 2 sets of the laser destroyers personally. Link to comment https://bolterandchainsword.com/topic/386077-tarantulas-and-rapiers-on-pre-order-june-14th/page/2/#findComment-6116032 Share on other sites More sharing options...
Deus_Ex_Machina Posted June 14 Share Posted June 14 On 6/13/2025 at 5:49 PM, 01RTB01 said: https://www.warhammer-community.com/en-gb/articles/uhpg6wrx/rapiers-and-tarantulas-painted-by-members-of-the-warhammer-design-studio/ What do we think, 50/60mm bases? Bigger base means you have more room to put tufts on. In addition your texture base paint shines more because on a smaller base most of it is obstructed by the weapon platform. Why has the Consul radioactive Fallout goop on his hammer? Link to comment https://bolterandchainsword.com/topic/386077-tarantulas-and-rapiers-on-pre-order-june-14th/page/2/#findComment-6116184 Share on other sites More sharing options...
Lord Marshal Posted June 14 Share Posted June 14 5 minutes ago, Deus_Ex_Machina said: Why has the Consul radioactive Fallout goop on his hammer? Graviton glow I think; Iron Warriors and all that. Link to comment https://bolterandchainsword.com/topic/386077-tarantulas-and-rapiers-on-pre-order-june-14th/page/2/#findComment-6116185 Share on other sites More sharing options...
soviet1337 Posted June 14 Share Posted June 14 On 6/13/2025 at 5:51 PM, 01RTB01 said: I must confess I hadn't twigged there were examples of both in the article. Tis very early here still lol. On this basis it'll be 60s. They look much better for it. The 50s look too small. Also means the rapiers should be bigger than the current resin versions and this would also explain the price point too. I've gone for 2 sets of the laser destroyers personally. I think I want to put mine on ovals, with the crew and gun all together. 105mm x 70mm seems about right. LameBeard 1 Back to top Link to comment https://bolterandchainsword.com/topic/386077-tarantulas-and-rapiers-on-pre-order-june-14th/page/2/#findComment-6116189 Share on other sites More sharing options...
01RTB01 Posted June 14 Author Share Posted June 14 1 hour ago, Deus_Ex_Machina said: Bigger base means you have more room to put tufts on. In addition your texture base paint shines more because on a smaller base most of it is obstructed by the weapon platform. Why has the Consul radioactive Fallout goop on his hammer? When I initially looked I hadn't realised they had some on 50s and some on the 60s. I've grabbed 60mm bases for mine. Larger bases look better for sure. Link to comment https://bolterandchainsword.com/topic/386077-tarantulas-and-rapiers-on-pre-order-june-14th/page/2/#findComment-6116193 Share on other sites More sharing options...
Corswain Posted June 14 Share Posted June 14 On 6/14/2025 at 1:49 AM, 01RTB01 said: https://www.warhammer-community.com/en-gb/articles/uhpg6wrx/rapiers-and-tarantulas-painted-by-members-of-the-warhammer-design-studio/ What do we think, 50/60mm bases? Box comes with 60mm so that's probably what we'll see the most of. Not sure if I'll base them at all. Link to comment https://bolterandchainsword.com/topic/386077-tarantulas-and-rapiers-on-pre-order-june-14th/page/2/#findComment-6116200 Share on other sites More sharing options...
01RTB01 Posted June 14 Author Share Posted June 14 2 minutes ago, Corswain said: Box comes with 60mm so that's probably what we'll see the most of. Not sure if I'll base them at all. Thanks for that, based on GW's official images that wasn't clear they came with any. I've cancelled my 60mm base order. I'll base as it makes transport easier as I magnetise all my bases. Corswain 1 Back to top Link to comment https://bolterandchainsword.com/topic/386077-tarantulas-and-rapiers-on-pre-order-june-14th/page/2/#findComment-6116201 Share on other sites More sharing options...
Nephaston Posted June 14 Share Posted June 14 What a strange coincidence. skylerboodie, roryokane, lhg033 and 4 others 1 1 4 1 Back to top Link to comment https://bolterandchainsword.com/topic/386077-tarantulas-and-rapiers-on-pre-order-june-14th/page/2/#findComment-6116216 Share on other sites More sharing options...
Xirix Posted June 15 Share Posted June 15 Neat, should be able to easily make some early Razorbacks too. Firedrake Cordova 1 Back to top Link to comment https://bolterandchainsword.com/topic/386077-tarantulas-and-rapiers-on-pre-order-june-14th/page/2/#findComment-6116395 Share on other sites More sharing options...
roryokane Posted June 16 Share Posted June 16 8 hours ago, Xirix said: Neat, should be able to easily make some early Razorbacks too. Volkite razorbacks, even. ;) Xirix 1 Back to top Link to comment https://bolterandchainsword.com/topic/386077-tarantulas-and-rapiers-on-pre-order-june-14th/page/2/#findComment-6116476 Share on other sites More sharing options...
Brofist Posted June 16 Share Posted June 16 Anybody got an idea of how those tarantula turret missiles compare in size to a deredeo missile launcher? Spagunk 1 Back to top Link to comment https://bolterandchainsword.com/topic/386077-tarantulas-and-rapiers-on-pre-order-june-14th/page/2/#findComment-6116508 Share on other sites More sharing options...
Naryn Posted June 17 Share Posted June 17 Deeply disappointed there isn't a grumpy marine poking his head out of the Whirlwind six inches in front of the launchers like in the old metal WW. Firedrake Cordova, roryokane and LameBeard 1 2 Back to top Link to comment https://bolterandchainsword.com/topic/386077-tarantulas-and-rapiers-on-pre-order-june-14th/page/2/#findComment-6116725 Share on other sites More sharing options...
Nephaston Posted June 17 Share Posted June 17 11 hours ago, Naryn said: Deeply disappointed there isn't a grumpy marine poking his head out of the Whirlwind six inches in front of the launchers like in the old metal WW. Gotta grab this beauty from the command sprue for maximum grump. HolyPestilience, painting.for.my.sanity, stretch_135 and 2 others 4 1 Back to top Link to comment https://bolterandchainsword.com/topic/386077-tarantulas-and-rapiers-on-pre-order-june-14th/page/2/#findComment-6116861 Share on other sites More sharing options...
roryokane Posted June 17 Share Posted June 17 3 hours ago, Nephaston said: Gotta grab this beauty from the command sprue for maximum grump. "I fought on both Isstvans and all I got was this crappy bionic" vibes. Firedrake Cordova 1 Back to top Link to comment https://bolterandchainsword.com/topic/386077-tarantulas-and-rapiers-on-pre-order-june-14th/page/2/#findComment-6116924 Share on other sites More sharing options...
Firedrake Cordova Posted June 19 Share Posted June 19 (edited) On 6/14/2025 at 11:21 PM, Nephaston said: What a strange coincidence. Is the turret ring on the Scorpius the same size as the one on the Rhino/Razorback kit? (I want to make Razorbacks and Whirlwinds for the 40K vehicles as I prefer the look of these parts to the regular ones) Edited June 19 by Firedrake Cordova painting.for.my.sanity 1 Back to top Link to comment https://bolterandchainsword.com/topic/386077-tarantulas-and-rapiers-on-pre-order-june-14th/page/2/#findComment-6117356 Share on other sites More sharing options...
Brofist Posted June 22 Share Posted June 22 On 6/19/2025 at 7:22 AM, Firedrake Cordova said: Is the turret ring on the Scorpius the same size as the one on the Rhino/Razorback kit? (I want to make Razorbacks and Whirlwinds for the 40K vehicles as I prefer the look of these parts to the regular ones) Yes, its the same size as the rhino/razorback kit. Also the same size as the OOP tarantulas Firedrake Cordova, Spagunk and roryokane 1 1 1 Back to top Link to comment https://bolterandchainsword.com/topic/386077-tarantulas-and-rapiers-on-pre-order-june-14th/page/2/#findComment-6117793 Share on other sites More sharing options...
Firedrake Cordova Posted June 22 Share Posted June 22 19 minutes ago, Brofist said: Yes, its the same size as the rhino/razorback kit. Also the same size as the OOP tarantulas Thanks! Link to comment https://bolterandchainsword.com/topic/386077-tarantulas-and-rapiers-on-pre-order-june-14th/page/2/#findComment-6117797 Share on other sites More sharing options...
Xenith Posted June 22 Share Posted June 22 On 6/8/2025 at 10:44 PM, Lupercals chosen said: Retro 2nd ed whirlwind here we come... Didn't they actually show artwork of a retro multiple rocket whirlwind model in one of the previews? Id hold off until we know whether it'll get released soon! Link to comment https://bolterandchainsword.com/topic/386077-tarantulas-and-rapiers-on-pre-order-june-14th/page/2/#findComment-6117801 Share on other sites More sharing options...
Firedrake Cordova Posted June 22 Share Posted June 22 4 hours ago, Xenith said: Didn't they actually show artwork of a retro multiple rocket whirlwind model in one of the previews? Id hold off until we know whether it'll get released soon! This? derLumpi and roryokane 1 1 Back to top Link to comment https://bolterandchainsword.com/topic/386077-tarantulas-and-rapiers-on-pre-order-june-14th/page/2/#findComment-6117829 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now