Cyrox Posted February 21, 2016 Share Posted February 21, 2016 While I love new Ulrik model as a wolf priest, i think the head is awful and so I decided to convert my Ulrik so he is wearing the Wolf helm of Russ and carrying his trademark Plasma Pistol. I took the hand holding the helmet and slowly carved away the fingers and wrist with a scalpel blade, I then carved out the left side as best as I could to match the right side. It look quite a while and I had to go very slowly. After that I chopped the neck from a standard marine helmet and glued it to the flat bottom of the Wolf helm. I then took a left arm from the Wolf pack sprue that conveniently had the plasma pistol, and cut it at the elbow to match the upper arm on the Ulrik model. I had to shave away the elbow plate on the lower part of the arm as its moulded to the upper part, and there is a recess for the forearm. It's actually better that way as the only place that the join is visible is the ribbed section on the inner elbow. Last thing was to cut the top of the holstered pistol away and carve it a little so it's an empty holster Can't wait to get some paint on it - put it together with blue tac to get some pics: http://i158.photobucket.com/albums/t107/ScoutSi/Miniatures/EDA0F586-9B28-4E1D-8FAC-4C0910D04E06_zpsziqdiovg.jpg http://i158.photobucket.com/albums/t107/ScoutSi/Miniatures/E0D13CC5-9685-4EAA-83AD-1290E7BC7AB9_zpsmadrhpk5.jpg http://i158.photobucket.com/albums/t107/ScoutSi/Miniatures/1449BA98-50C1-466B-969D-295DE708F57E_zpsu6n4tnio.jpg http://i158.photobucket.com/albums/t107/ScoutSi/Miniatures/1D7A16D3-FF23-4671-BA12-F46750D9A4C6_zpswlcfxqme.jpg http://i158.photobucket.com/albums/t107/ScoutSi/Miniatures/D1BD95ED-356C-41D8-BD8B-1CC62E536658_zpsstjlqopx.jpg http://i158.photobucket.com/albums/t107/ScoutSi/Miniatures/F265407D-98CF-4866-A7F8-CC804A2D3D85_zpscivj81ph.jpg Need to do a final clean up and drill he plasma pistol, and then it's paint time Hope you like - I think he looks much better with helmet on Cheers Link to comment https://bolterandchainsword.com/topic/319549-ulrik-the-slayer-helmet-conversion-paint-update/ Share on other sites More sharing options...
Biohazard Posted February 21, 2016 Share Posted February 21, 2016 SO much better. As soon as I saw the new model I was a little disappointed with the head. I love wha you've done with him though. Looking forward to paint. Link to comment https://bolterandchainsword.com/topic/319549-ulrik-the-slayer-helmet-conversion-paint-update/#findComment-4314244 Share on other sites More sharing options...
Widowmaker Posted February 21, 2016 Share Posted February 21, 2016 Nice work Cyrox! I had been wondering if that was possible. Thanks for showing the way! Cheers, Widowmaker Link to comment https://bolterandchainsword.com/topic/319549-ulrik-the-slayer-helmet-conversion-paint-update/#findComment-4314246 Share on other sites More sharing options...
Svengir_Seastrider Posted February 21, 2016 Share Posted February 21, 2016 Glad to see this is a possibility! I agree that it looks much better with the wolf helm. Link to comment https://bolterandchainsword.com/topic/319549-ulrik-the-slayer-helmet-conversion-paint-update/#findComment-4314249 Share on other sites More sharing options...
GrandMagnus Posted February 21, 2016 Share Posted February 21, 2016 Muuuuch better than the bare head version. Link to comment https://bolterandchainsword.com/topic/319549-ulrik-the-slayer-helmet-conversion-paint-update/#findComment-4314341 Share on other sites More sharing options...
deathspectersgt7 Posted February 21, 2016 Share Posted February 21, 2016 ACE JOB !!!!! Much better . Link to comment https://bolterandchainsword.com/topic/319549-ulrik-the-slayer-helmet-conversion-paint-update/#findComment-4314389 Share on other sites More sharing options...
Grotsmasha Posted February 21, 2016 Share Posted February 21, 2016 I actually don't mind the bare head, but the Wolf Helm is a significant improvement, very nicely done :tu: Cheers, Jono Link to comment https://bolterandchainsword.com/topic/319549-ulrik-the-slayer-helmet-conversion-paint-update/#findComment-4314434 Share on other sites More sharing options...
dogfender Posted February 22, 2016 Share Posted February 22, 2016 Looks great! Any thoughts on having him wielding the Crux in a commanding pose rather than the current? Link to comment https://bolterandchainsword.com/topic/319549-ulrik-the-slayer-helmet-conversion-paint-update/#findComment-4314499 Share on other sites More sharing options...
KrautScientist Posted February 22, 2016 Share Posted February 22, 2016 I love bareheaded Marines, but the helmet was always one of the best parts about Ulric, because it made him look so sinister and mysterious. The head on the new model, then, was a huge disappointment in that it revealed him to be ...just another bearded guy. So I really wanted someone to do this conversion in style, and your version looks fantastic! Excellent job, bringing the cool back to Ulric! :) Link to comment https://bolterandchainsword.com/topic/319549-ulrik-the-slayer-helmet-conversion-paint-update/#findComment-4314506 Share on other sites More sharing options...
hushrong Posted February 22, 2016 Share Posted February 22, 2016 I didn't mind his bare head. However, seeing that helm on his noggin and that plasma pistol ready to rock I like your take a lot more than the original one intended. Link to comment https://bolterandchainsword.com/topic/319549-ulrik-the-slayer-helmet-conversion-paint-update/#findComment-4314619 Share on other sites More sharing options...
Lord Commander Eidolon Posted February 22, 2016 Share Posted February 22, 2016 Love it, truly inspiring stuff! Well done! Link to comment https://bolterandchainsword.com/topic/319549-ulrik-the-slayer-helmet-conversion-paint-update/#findComment-4314681 Share on other sites More sharing options...
Bjorn Firewalker Posted February 22, 2016 Share Posted February 22, 2016 Looks good so far. I can't wait to see him painted. Link to comment https://bolterandchainsword.com/topic/319549-ulrik-the-slayer-helmet-conversion-paint-update/#findComment-4314691 Share on other sites More sharing options...
StraightSilver Posted February 22, 2016 Share Posted February 22, 2016 Hats off to you for doing this, wasn't sure it would be possible but you did a great job gettting it all to come together, doesn't look like a conversion.I actually love the stock model but know that a lot of people don't and I guess the helmet is pretty iconic. Link to comment https://bolterandchainsword.com/topic/319549-ulrik-the-slayer-helmet-conversion-paint-update/#findComment-4314778 Share on other sites More sharing options...
Halandaar Posted February 22, 2016 Share Posted February 22, 2016 Despite the fact that I prefer the bared head (I find the helm a bit daft looking), it's a really well executed job and definitely evokes the original model nicely. Link to comment https://bolterandchainsword.com/topic/319549-ulrik-the-slayer-helmet-conversion-paint-update/#findComment-4314872 Share on other sites More sharing options...
K0rtmer Posted February 22, 2016 Share Posted February 22, 2016 Very well done, sir. He looks awesome like that! Link to comment https://bolterandchainsword.com/topic/319549-ulrik-the-slayer-helmet-conversion-paint-update/#findComment-4314888 Share on other sites More sharing options...
Carrick Posted February 22, 2016 Share Posted February 22, 2016 So good, this is how the model should have been if they were going for static. I always imagined that Ulrik never took the wolf helm off. Link to comment https://bolterandchainsword.com/topic/319549-ulrik-the-slayer-helmet-conversion-paint-update/#findComment-4314960 Share on other sites More sharing options...
Cyrox Posted February 27, 2016 Author Share Posted February 27, 2016 Thanks for the kind comments folks, much appreciated Managed to get some painting done this last couple of evenings, and I'm getting there. Still need to do some final highlighting, do the gem stones and helmet lenses, and properly highlight the cape and wolf pelts. Also needs some tidying up and then basing. http://i158.photobucket.com/albums/t107/ScoutSi/Miniatures/6D17A496-8C81-4660-8781-38980F9BB4ED_zps1ipti1r6.jpg http://i158.photobucket.com/albums/t107/ScoutSi/Miniatures/56E908C9-380B-4A91-8258-1E6568615866_zpssjetkuuk.jpg Link to comment https://bolterandchainsword.com/topic/319549-ulrik-the-slayer-helmet-conversion-paint-update/#findComment-4320116 Share on other sites More sharing options...
That Guy Matt Posted February 28, 2016 Share Posted February 28, 2016 Excellent conversion and paint job. Link to comment https://bolterandchainsword.com/topic/319549-ulrik-the-slayer-helmet-conversion-paint-update/#findComment-4321078 Share on other sites More sharing options...
alakinsky Posted March 2, 2016 Share Posted March 2, 2016 This is a great job to make an excellent model look even better. I want to do a similar conversion to add the Wolf Helm of Russ and the plasma pistol. However, I want to make him a bit more dynamic and also re-do the Crozious arm. It's going to be difficult and will push the limits of my skills. With your model as inspiration, though, I'm ready to tackle it! Link to comment https://bolterandchainsword.com/topic/319549-ulrik-the-slayer-helmet-conversion-paint-update/#findComment-4324564 Share on other sites More sharing options...
Dagoth Ur Posted March 2, 2016 Share Posted March 2, 2016 Wow, amazing paintjob and conversion! Link to comment https://bolterandchainsword.com/topic/319549-ulrik-the-slayer-helmet-conversion-paint-update/#findComment-4324594 Share on other sites More sharing options...
deathspectersgt7 Posted March 2, 2016 Share Posted March 2, 2016 He looks Great . Link to comment https://bolterandchainsword.com/topic/319549-ulrik-the-slayer-helmet-conversion-paint-update/#findComment-4324610 Share on other sites More sharing options...
lukeprice85 Posted July 27, 2018 Share Posted July 27, 2018 This looks epic! I want to do something similar with the head. So difficult finding the bits needed without buying the whole model Link to comment https://bolterandchainsword.com/topic/319549-ulrik-the-slayer-helmet-conversion-paint-update/#findComment-5131808 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.