Jump to content

Blackadders Warlord WIP


Recommended Posts

Ha bet you thought I'd forgotten about this. Truth is I've been repairing plumbing and wiring and installing a new water heater and hadn't much time for building but that's behind me for a couple of days so back to the cockpit design. Actually I had time to reflect how to proceed with this and have come up with a way to build a hollow flight deck.

 

Seen below compared to Lucie's cockpit the Warlord's is about three times larger which compares well as the Warlord is three times taller than the Warhound.

 

http://i.imgur.com/NKhhV.jpg

http://i.imgur.com/NKhhVl.jpg

 

Here you see the footing for the interior floor and the inner edge of the prominent overbite of the head armour.

 

http://i.imgur.com/CsoU9.jpg

http://i.imgur.com/CsoU9l.jpg

 

as seen in this image of the original.

Link to comment
Share on other sites

I haven't a clue what I am doing guessing at angles and sizes this head construct should prove interesting. It's much the same way I built the arms for Lucie so I can only that lightning does strike twice in the same place or in this case three times.

 

http://i.imgur.com/yDQbE.jpg

http://i.imgur.com/yDQbEl.jpg

Link to comment
Share on other sites

Ya know when I was a kid there was a show on TV, "Jon Gnagy's 'Learn to Draw'." I used to watch that show religiously. I had the Jon Gnagy book, pencils, eraser, sketchpad, charcoal,.... you name it I had it. That SOB would start drawing some forest scene or Steam engine at the station and I was furiously following along trying to do everything that bast---d did and he'd be put the frame on his work and my jaw was on the floor. You just couldn't keep up with him.

 

I thought it might be fun for you to see how the Blackadder works so I'm going to be taking pictures step by step of this head assembly so you can see that I haven't the vaguest idea what I am going to do next. I have no mechanical drawings, templates, or sketches to go by except for the G--D----- images DS posted. A lot of people ask for templates and I feel bad that I can't provide them because there aren't any, it's all in my head so we can both see how this cockpit module progresses for better or worse because it could be a total fiasco..............

 

http://i.imgur.com/fKEn8.jpg

http://i.imgur.com/fKEn8l.jpg

Link to comment
Share on other sites

I Have to admit the head is coming along swimmingly The relative size seems good and the movement range seems adequate. also most of the damage to Lucie has been repaired; just remounting the guns with magnets to go.

 

http://i.imgur.com/YQdaI.jpg

http://i.imgur.com/YQdaIl.jpg

 

I had Lucie pose with the new titan for a size comparison and she is dwarfed by the Warlord; I may have to make a Reaver just to take up the gap

 

http://i.imgur.com/219OM.jpg

http://i.imgur.com/219OMl.jpg

 

Here we have the Warlord looking right,

 

http://i.imgur.com/ZDnIs.jpg

http://i.imgur.com/ZDnIsl.jpg

 

Looking left and

 

http://i.imgur.com/rq3Zh.jpg

http://i.imgur.com/rq3Zhl.jpg

 

looking down to the right a bit unnerving from this angle thank the Emperor she's not armed.

 

http://i.imgur.com/qtapV.jpg

http://i.imgur.com/qtapVl.jpg

 

I have to reposition the chest/neck armour a bit as the head armour won't clear when it's installed.

Link to comment
Share on other sites

I neglected to mention the telescoping feature of the neck module prompting some to comment that the neck was too short. I prefer to rationalize that the neck in full extension is scout mode and retracted is battle mode.

 

Thats my story take it or leave it :P

http://i.imgur.com/1neqy.jpg

http://i.imgur.com/1neqyl.jpg

 

http://i.imgur.com/m7M6a.jpg

http://i.imgur.com/m7M6al.jpg

 

http://i.imgur.com/ECHvU.jpg

http://i.imgur.com/ECHvUl.jpg

 

That's the ticket Blackadder blind them with footwork..........

Link to comment
Share on other sites

There is nothing new under the Sun, the more I work on this thing the more it reminds me of the snout of a Diplodocus Carnegii.

 

http://i.imgur.com/mcQbk.jpg

http://i.imgur.com/mcQbkl.jpg

 

http://i.imgur.com/rNnkR.jpg

http://i.imgur.com/rNnkRl.jpg

 

 

http://images.inmagine.com/img/iris/imagebrokerrm-288/ptg01377602.jpg

Link to comment
Share on other sites

Dude I'm tell'n ya women have a lot of goodies that they keep from us and I'm not talk'n 'bout the obvious but chances are your ol' lady has a spatter shield that she uses when she fries up those 'burgers and that is just scream'n to be replaced. If its like my old lady there are rents in it and its all wrinkled (I'm talk'n 'bout the splatter shield now.....) and its time for a new one (Still talk'n 'bout the splatter shield). Imagine the joy on yer spouse's mug when you give her a new one for Christmas and what better way to help the environment than to recycle the old one in your scratch projects......

 

http://i.imgur.com/ed8YI.jpg

http://i.imgur.com/ed8YIl.jpg

 

Here is mine as new grills for the Warlord cockpit intakes or whathaveyou.

 

http://i.imgur.com/N4eSy.jpg

http://i.imgur.com/N4eSyl.jpg

 

http://i.imgur.com/UapZY.jpg

http://i.imgur.com/UapZYl.jpg

 

Its gonna be a Merry Christmas at the Blackadder household believe me or I'm an Orc's Grandpa.............

 

Yeah the BA has a bag on.

 

But I'm dead serious about the Christmas present......................

Link to comment
Share on other sites

This morning I cut the lozenge shaped vents that define the screens and before I glue on the right side I'm taking a picture that you might know how it was accomplished.

 

The radius of the side curve where it wraps around the snout seems almost perfect; about a quarter of a millimeter too big on the bottom but not enough to quibble over if the other side matches.

 

http://i.imgur.com/SRfRS.jpg

http://i.imgur.com/SRfRSl.jpg

 

http://i.imgur.com/XeKBl.jpg

http://i.imgur.com/XeKBll.jpg

 

Most of these vents will be covered with the face armour but if you peer really hard under that armour you will see that the whole vent opening is there.

 

Crazy I know but I need the practice.

Link to comment
Share on other sites

The lozenge shaped vents came out fairly decent but not as well crafted as Mr Smith's. I wonder how he made his? I made mine with a Martini in hand which I wouldn't recommend to would be modelers handling razor sharp knives and the like and there seems to be a slackening of quality.

 

But they should suffice for this titan.

 

http://i.imgur.com/GSWKQ.jpg

http://i.imgur.com/GSWKQl.jpg

 

http://i.imgur.com/sIDu8.jpg

http://i.imgur.com/sIDu8l.jpg

 

 

The pencil scribed lines are for the face shield which I shall attempt next. This shield gives the head the anthropomorphic quality from which the upper lip and cockpit windshield detracts.

 

What would give the head a more human appearance would be a nose but that would just look silly. We're not going there.

Link to comment
Share on other sites

Its about time to start considering the scale of the furniture and crew in the cockpit. I'm getting an idea of the height of the seated figures so they might peer out of the windscreen. The seated Princep should be on a raised dais and a Moderatus standing in attendance. Two seated helmsmen; a Sensorus and a Steersman. The latter two individuals I have in abundance but I need candidates for the Princep and Moderatus?

 

 

http://i.imgur.com/ubFwM.jpg

http://i.imgur.com/ubFwMl.jpg

 

 

http://i.imgur.com/ioUgF.jpg

http://i.imgur.com/ioUgFl.jpg

 

 

http://i.imgur.com/CAbSV.jpg

http://i.imgur.com/CAbSVl.jpg

Link to comment
Share on other sites

I must agree with Lazy here, and having read the awsomeness that is Titanicus the warlord has ( if the princept is in an amniotic tank ) has a famulous then the Moderati is seated seperatly. Not sure how it would be done if the Princept isnt in a tank, but im sure it would be similar.

 

Would be rather interesting to see how you would model an amniotic emerssed Princept Mr.Blackadder!!!

 

As always keep up the fantastic work!!!

 

British

Link to comment
Share on other sites

I'm really getting into it now as it seems the proportions are workable.

 

http://i.imgur.com/BGnt5.jpg

http://i.imgur.com/BGnt5l.jpg

 

 

http://i.imgur.com/CiKM6.jpg

http://i.imgur.com/CiKM6l.jpg

 

 

http://i.imgur.com/lROP8.jpg

http://i.imgur.com/lROP8l.jpg

 

 

http://i.imgur.com/wtIwg.jpg

http://i.imgur.com/wtIwgl.jpg

 

 

http://i.imgur.com/wH635.jpg

http://i.imgur.com/wH635l.jpg

 

I tend to get depressed when things don't work out and drop the modeling for a few days to reflect.

 

Another glimpse into my psychosis............

Link to comment
Share on other sites

Psi-titans are a thing, or at least, they were . . . if the witch-princeps knew a power like 'Wings of Sanguinus,' it could happen. ;)

That would be the single most terrifying thing ever.

 

"Ok, movement phase... my Warlord Titan is casting Wings of Sanguinus."

 

"... Um, what?"

 

"Successful roll, he's going to stomp on everything between here and... there, yep, measures out to be 36 inches."

 

"Your kidding right?"

 

"Nope. Don't even try cover saves, this isn't the shooting phase."

 

"..."

 

"Although we'll have plenty of fun in the shooting phase too, don't worry, that inferno cannon is still itching for payback on your Baneblade."

Link to comment
Share on other sites

Psi-titans are a thing, or at least, they were . . . if the witch-princeps knew a power like 'Wings of Sanguinus,' it could happen. :P

That would be the single most terrifying thing ever.

 

"Ok, movement phase... my Warlord Titan is casting Wings of Sanguinus."

 

"... Um, what?"

 

"Successful roll, he's going to stomp on everything between here and... there, yep, measures out to be 36 inches."

 

"Your kidding right?"

 

"Nope. Don't even try cover saves, this isn't the shooting phase."

 

"..."

 

"Although we'll have plenty of fun in the shooting phase too, don't worry, that inferno cannon is still itching for payback on your Baneblade."

 

Quit frankly I would be more concerned with how it landed. a 500 ton mechanized god coming in for a landing from a jump... yes... EVERYTHING with in 10D6" must take a toughess test. If they fail they take a strength 4 hit, armour saves allowed. Vehicles will instead be aromatically shaken (If not shaken apart!) and take a strength 8 hit against their rear armor. If any legged model included walkers, infantry, jump infantry, and Calvary do not die to this hit they count at stunned for the next turn while they try to regain their footing. All shooting conducted by these units will be treated as snap fire until the end of their turn. Everything in this area now counts as being in difficult terrain.

Link to comment
Share on other sites

All this speculation on how this monstrosity will land is specious at best. I constantly wonder how it maintains structural integrity even in the simple act of walking as all the weight is one one foot for a significant period of time multiple seconds at the least. Note that in nature there are very few over-sized bipeds with the noted exception of T'Rex and his ilk but they had the benefit of a huge tail to supplement stabilization by shifting side to side. Large quadrupeds such as elephants only have one foot off the ground at one time which accounts for its peculiar running gait. The thought of a 1000+ ton construct attempting a controlled crash is ludicrous.

 

I say 1000 ton because even a Baneblade weighs in at 300 tons so a Warlord should be at least 3 times heavier

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.