Ovidius Incertus Posted April 30, 2018 Share Posted April 30, 2018 TITH...or more like over the last week...I built 17 Wyches, 5 Immortals and 5 'Cron Warriors, plus 3 Scarabs. Going to go in on the Cryptek tonight...and I'm off work tomorrow so I'm going to hopefully use the whole day to build! Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/276/#findComment-5068279 Share on other sites More sharing options...
treadhead Posted April 30, 2018 Share Posted April 30, 2018 TITHI Got my caladius grav tank and custodes transfer sheet in the mail, sprayed it (the tank not the transfers) black, boltgun and gold, and began construction of the sub assemblies prior to painting the fiddly bits Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/276/#findComment-5068699 Share on other sites More sharing options...
RikuEru Posted April 30, 2018 Share Posted April 30, 2018 (edited) TITHI mustered the UNPAINTED forces, collected all of them on a sheet and counted them.With all my models that are still on sprues: 266 individual models... still not painted ...for my Space Wolves. (Denial) It can't be that much...(Anger) Why the heck did I buy so much over the last two years? Ugh!(Bargaining) I wish I could get these painted in no time... I'd sell my brother for it.(Depression) I wanna hide down at the Geothermal Reactors of the Aett...(Acceptance) ...but guess I need to vow SOMETHING for the ETL now. Edited April 30, 2018 by RikuEru Montford, N1SB, Semper Fortis and 1 other 4 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/276/#findComment-5068757 Share on other sites More sharing options...
Dreagher Posted April 30, 2018 Share Posted April 30, 2018 Tith I started working on my falchion, which turned out to be a really bad cast. Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/276/#findComment-5068758 Share on other sites More sharing options...
Viridia Posted May 1, 2018 Share Posted May 1, 2018 TITHI received my order of some air-range paints (Yellow and scarlet), some Ushabti Bone, plus a Mephiston Red along with the GW Finecast Sorceror plus two of their basing kits. Now I just need to read the instructions for my airbrush to figure out how to make it work and then I can at least get my Deredeo undercoated in time for my second ETL vow, since the first is going quite well at the moment and should be finished in the next couple of days. As for the sorceror, time to hack it up and see what tricks I've got to make a Sorceror Lord, just need to source a Disc of Tzeentch for him as well. Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/276/#findComment-5069506 Share on other sites More sharing options...
Lord Rust Posted May 1, 2018 Share Posted May 1, 2018 TITH I finally got started on painting the old metal Khârn funny story, Khârn was the first HQ I ever used (had to ask permission..) in my first game of 40k Khârn has been in about 90% of my lists since, although I have been using my own counts-as (aka Khyrk the Berzyrk) I got the metal model at a tourney 3 or so years ago, at a big discount because the packaging was in bad shape, and it has set untouched Then ETL........................ Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/276/#findComment-5069718 Share on other sites More sharing options...
Race Bannon Posted May 1, 2018 Share Posted May 1, 2018 (edited) TITH I bought a DW Kill Team to use as conversion bits for my Sternguard and LotD squad that I *mmmiiiggghhhttt* vow into the ETL. I also put the first color on my first vow and was surprised how fast that went. If I can get the wash done tonight then I'll be further along than I thought I would be. I also took 5th/6th Codecies and had them chopped open. Between work emails I recycled the pages that are "worthless" and kept two other stacks: fluff to compile into a single folder and fluff to scan into PDF for fluff's sake! I loath to chop up my 2nd edition codecies because not only are they "old", they are tangible relics of my glory-gaming days. The more I type, the more I think I'll just box them up with my 3rd edition Index Astartes and Blue Planet RPG stuff. Being a cheap collector can suck ... maybe my wife is right Edited May 1, 2018 by Race Bannon Viridia 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/276/#findComment-5069847 Share on other sites More sharing options...
Semper Fortis Posted May 2, 2018 Share Posted May 2, 2018 TITH I started painting the Legion Recon squad I was about to start when ETL was announced. Go Age of Darkness loyalists! deathspectersgt7 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/276/#findComment-5070031 Share on other sites More sharing options...
Vraxka Posted May 2, 2018 Share Posted May 2, 2018 TITH I started to base coat the helmet of my chapters Captain then started to apply the color. Soon after I rubbed off the paint mostly on the front as I wasn't happy with it in places. I really think I need to get some new brushes lol. Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/276/#findComment-5070290 Share on other sites More sharing options...
Magos Takatus Posted May 2, 2018 Share Posted May 2, 2018 TitHI finished painting and assembling a Necrosphinx I've had kicking around for ages. I'm not happy with the weird finish I got on the stone sections. The Deathshroud clear paint I used seemed to leave a gritty residue and I was getting fluff on the model. I think it might be paper towel fibers from my homemade wet pallette. Anyway, that model is done and I'm about to start preparing a Riptide. I think I might give this to my nephew as a gift, but I am undecided about the pose and the colour scheme currently. Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/276/#findComment-5070586 Share on other sites More sharing options...
Vraxka Posted May 2, 2018 Share Posted May 2, 2018 TITH I attempted to create my Champions Honor crest with white tack and a rough cut out wolf head from a SW axe to get a rough idea how it may look. It's currently my latest challenge. http://0bsidianknights.tumblr.com/post/173521370980/ive-been-really-focused-on-the-honor-crest-for-my Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/276/#findComment-5070769 Share on other sites More sharing options...
Daimyo-Phaeron Lenoch Posted May 5, 2018 Share Posted May 5, 2018 TITHI ordered part of my ETL vow: a Necron overlord (resin) to try and convert/repose. Here’s to it not being a failcast! Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/276/#findComment-5073031 Share on other sites More sharing options...
Viridia Posted May 5, 2018 Share Posted May 5, 2018 YITHI crashed around my room trying in desperation to find my clippers, and promptly failed to find them for about an hour...until I realised they were next to my chair on my desk all along, so yes, I did make myself look a right pillock. But on the bright side, I found my missing sprues for my Skitarii and my GS Initiates, plus the ten resin MkIV marines I bought many moons ago from FW that kickstarted my dive into the Horus Heresy, and my resin Primus Medicae in Cataphractii! I just need to figure out how to replace the weird medical tubes that should be on his back, because they went missing when I first started building him. Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/276/#findComment-5073474 Share on other sites More sharing options...
Teetengee Posted May 5, 2018 Share Posted May 5, 2018 WOOOOO ETL MEANS I'M PAINTING AGAIN FOR THE FIRST TIME IN ABOUT A YEAR!!!!!!!!!!!!!!!!!!!!!! Bryan Blaire, Semper Fortis and Dragonlover 3 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/276/#findComment-5073652 Share on other sites More sharing options...
The Yncarne Posted May 5, 2018 Share Posted May 5, 2018 (edited) Today in the hobby I finished 3 rhinos for my Thousand Sons faction. Here are some pictures. More are in my gallery. I also got decent pictures of a helbrute... And a dreadnought Edit: fixed bad spoiler Edited May 8, 2018 by The Blood Raven Teetengee, N1SB and Vraxka 3 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/276/#findComment-5073664 Share on other sites More sharing options...
Montford Posted May 7, 2018 Share Posted May 7, 2018 TitH I finished painting, decaling and flocking my Avatar and Hemlock Wraithfighetr for my Alaitoc-based Craftworld army. (Craftworld Gondolin) Bryan Blaire 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/276/#findComment-5074376 Share on other sites More sharing options...
treadhead Posted May 7, 2018 Share Posted May 7, 2018 TITHI Finished my first armiger knight and worked on some more skitari rangers Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/276/#findComment-5074395 Share on other sites More sharing options...
Laughingman Posted May 7, 2018 Share Posted May 7, 2018 About 80% done with a Legion Heavy bolter squad (five man) and two veteran sergeants... They just need some shoulder pads and helmets... Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/276/#findComment-5074397 Share on other sites More sharing options...
Winds Of Fury Posted May 8, 2018 Share Posted May 8, 2018 Yesterday i bought a new hobby knife. Today I put the same knife in to my thigh and now I have two stitches. At least the knife is confirmed as sharp. Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/276/#findComment-5075534 Share on other sites More sharing options...
deathspectersgt7 Posted May 8, 2018 Share Posted May 8, 2018 YITH actually posted some pics of a painted Marine. Semper Fortis 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/276/#findComment-5075557 Share on other sites More sharing options...
Jukkiz Posted May 8, 2018 Share Posted May 8, 2018 TITH I started painting the handlemaster of the blades and big boy redemptor Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/276/#findComment-5075890 Share on other sites More sharing options...
Vraxka Posted May 8, 2018 Share Posted May 8, 2018 TITH i have been putting together lists for supplies (painting on hold til I get some new brushes, any recommendations ?) a bitz list and another for what I'm planning to put together. Breaking them down into companies (1st - 5th) and what I plan on equipping them with. Trying to make it easier for myself and helps me get on track :) Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/276/#findComment-5075956 Share on other sites More sharing options...
Viridia Posted May 8, 2018 Share Posted May 8, 2018 TITHI built a Praetorian for my long-planned Inquisimunda AM Explorator warband. Just need to source the bits for the next big part of the warband. Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/276/#findComment-5075979 Share on other sites More sharing options...
Brother Sefiel Posted May 8, 2018 Share Posted May 8, 2018 GreetingsAfter some time away, finally fought two games, against the same list, in one night.Not the results I was hoping for; will write up reports shortly... Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/276/#findComment-5076077 Share on other sites More sharing options...
Lord Rust Posted May 9, 2018 Share Posted May 9, 2018 TITH I continued work on my ETL vow Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/276/#findComment-5076099 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now