Jump to content

Recommended Posts

Aphael looks choice.

One thing is nagging me about those destroyers being used as DC, the additional pistol holster on each one. So far I've only been able to use mine either by making gunslinger Vanguard or cutting a holster off and covering it with other bits and bobs, though that could well just be me being neurotic...

Ha thanks abadizzle! I started on Aphael today in fact, along with a tactical squad, assault marine squad, Death Company squad and two Dreadnoughts! I'm also painting another Mephiston and there are plenty more in the queue behind...

 

@ Mikael the head is also separate so no worries there. If you go to the GW website there should be a picture of the sprue..?

I thought I had, but could have sworn it was just various angles of the model. I'll check again, but thanks for the answer!

 

Additionally, I am also waiting with bated breath on Captain Aphael (and the rest of your project list). :thumbsup:

 

Edit: It seems there is a photo of the sprue. Maybe I was thinking of a different model that didn't show a sprue...

Edited by Brother Mikael
  • 1 month later...

Finally time to brush off the cobwebs from this thread and show Mephiston, who I painted for fellow frater Indefragable. This completes a small set of models I painted for him which will be shipping off across the pond this weekend :smile.:

 

http://www.themightybrush.com/wp-content/uploads/2016/12/Blood-Angels-Mephiston-Original-01-750x750.jpg

http://www.themightybrush.com/wp-content/uploads/2016/12/Blood-Angels-Mephiston-Original-02-750x750.jpg

http://www.themightybrush.com/wp-content/uploads/2016/12/Blood-Angels-Mephiston-Original-03-750x750.jpg

http://www.themightybrush.com/wp-content/uploads/2016/12/Blood-Angels-Mephiston-Original-04-750x750.jpg

http://www.themightybrush.com/wp-content/uploads/2016/12/Blood-Angels-Mephiston-Original-05-750x750.jpg

It would be great if the sword were thinner and the the pistol arm pointing up...

I don't mind the thickness of the blade and the orientation of the pistol. The two prongs near the point of the blade just seem ridiculous. I fear both weapons pointing up would end up with a silly pose like this one.

Thanks Uveron!

 

 

It would be great if the sword were thinner and the the pistol arm pointing up...

I don't mind the thickness of the blade and the orientation of the pistol. The two prongs near the point of the blade just seem ridiculous. I fear both weapons pointing up would end up with a silly pose like this one.

 

That's true – I'd prefer him with sword down and pistol up, personally. I just think the pistol arm looks static and un-natural somehow... and the blade is so thick it makes it look almost like a club!

  • 2 weeks later...

First finished models of 2017, lots more to come!

 

Relic Sicaran Battle Tank:

 

http://www.themightybrush.com/wp-content/uploads/2017/01/Blood-Angels-Sicaran-Battle-Tank-01-750x514.jpg

http://www.themightybrush.com/wp-content/uploads/2017/01/Blood-Angels-Sicaran-Battle-Tank-02-750x514.jpg

http://www.themightybrush.com/wp-content/uploads/2017/01/Blood-Angels-Sicaran-Battle-Tank-03-750x514.jpg

http://www.themightybrush.com/wp-content/uploads/2017/01/Blood-Angels-Sicaran-Battle-Tank-04-750x514.jpg

http://www.themightybrush.com/wp-content/uploads/2017/01/Blood-Angels-Sicaran-Battle-Tank-05-750x514.jpg

http://www.themightybrush.com/wp-content/uploads/2017/01/Blood-Angels-Sicaran-Battle-Tank-06-750x514.jpg

http://www.themightybrush.com/wp-content/uploads/2017/01/Blood-Angels-Sicaran-Battle-Tank-07-750x514.jpg

http://www.themightybrush.com/wp-content/uploads/2017/01/Blood-Angels-Sicaran-Battle-Tank-08-750x514.jpg

http://www.themightybrush.com/wp-content/uploads/2017/01/Blood-Angels-Sicaran-Battle-Tank-09-750x514.jpg

 

Deredeo Pattern Dreadnought

 

http://www.themightybrush.com/wp-content/uploads/2017/01/Blood-Angels-Deredeo-Dreadnought-01-750x750.jpg

http://www.themightybrush.com/wp-content/uploads/2017/01/Blood-Angels-Deredeo-Dreadnought-02-750x750.jpg

http://www.themightybrush.com/wp-content/uploads/2017/01/Blood-Angels-Deredeo-Dreadnought-03-750x750.jpg

http://www.themightybrush.com/wp-content/uploads/2017/01/Blood-Angels-Deredeo-Dreadnought-04-750x750.jpg

http://www.themightybrush.com/wp-content/uploads/2017/01/Blood-Angels-Deredeo-Dreadnought-05-750x750.jpg

http://www.themightybrush.com/wp-content/uploads/2017/01/Blood-Angels-Deredeo-Dreadnought-06-750x750.jpg

Really love these latest additions, love the vibrant red and how you've managed to effectively weather it. The Sicaran is spectacular, but i'd probably try some weathering powders on and around the tracks to simulate the dirt and dust built up! Great use of white on the Deredeo too, really makes the head pop -- I was pondering doing my latest EC dread with a white head, you've certainly convinced me to go with it!!

Thanks guys!

 

@ Eidolon, yeah I'm happy with the choice of white helmet. All my Veterans will have white helmets instead of gold (I just like the red & white combo), so he'll tie in nicely.

 

I did consider using some powders to represent dust on both of these but didn't want to overdo it. May still go back and add some.

New models look great Luther! Really like how you've picked the colour combination for the reds, blacks, golds and silver. Will be looking to do something similar when I paint mine. Only crit I have is for the barrels on both of the models which show some noticeable bends which is really detracting from the overall paintjob. You should look into getting a heat gun (much more effective than a hair dryer) for straightening out those really stubborn parts. 

I actually had to go back and look at the pictures to figure out what you meant but I can see it now! They were actually very severely bent went I received the kits but I soaked them in hot water and straightened them. Must have slowly bent back slightly without me noticing! I wonder if it's safe to heat them up now they're painted and try straightening again..?

 

In other news, I finished some Scout Snipers!

 

http://www.themightybrush.com/wp-content/uploads/2017/01/Blood-Angels-Scout-Snipers-01-750x449.jpg

http://www.themightybrush.com/wp-content/uploads/2017/01/Blood-Angels-Scout-Snipers-02-750x449.jpg

http://www.themightybrush.com/wp-content/uploads/2017/01/Blood-Angels-Scout-Snipers-03-750x750.jpg

http://www.themightybrush.com/wp-content/uploads/2017/01/Blood-Angels-Scout-Snipers-04-750x750.jpg

http://www.themightybrush.com/wp-content/uploads/2017/01/Blood-Angels-Scout-Snipers-05-750x750.jpg

http://www.themightybrush.com/wp-content/uploads/2017/01/Blood-Angels-Scout-Snipers-06-750x750.jpg

http://www.themightybrush.com/wp-content/uploads/2017/01/Blood-Angels-Scout-Snipers-07-750x750.jpg

http://www.themightybrush.com/wp-content/uploads/2017/01/Blood-Angels-Scout-Snipers-08-750x750.jpg

http://www.themightybrush.com/wp-content/uploads/2017/01/Blood-Angels-Scout-Snipers-09-750x750.jpg

http://www.themightybrush.com/wp-content/uploads/2017/01/Blood-Angels-Scout-Snipers-10-750x750.jpg

http://www.themightybrush.com/wp-content/uploads/2017/01/Blood-Angels-Scout-Snipers-11-750x750.jpg

http://www.themightybrush.com/wp-content/uploads/2017/01/Blood-Angels-Scout-Snipers-12-750x750.jpg

Edited by LutherMax

I actually had to go back and look at the pictures to figure out what you meant but I can see it now! They were actually very severely bent went I received the kits but I soaked them in hot water and straightened them. Must have slowly bent back slightly without me noticing! I wonder if it's safe to heat them up now they're painted and try straightening again..?

 

In other news, I finished some Scout Snipers!

 

Yeah, I've had the same thing happen with some of my models from before. It's a huge pain as that's all I notice now when I look at them and really distracts from the paintjob. Never tried reheating after painting it...I'd assume it would cause the paint to bubble and peel but let me know if you do try and how it turns out :D

 

Snipers look great btw...excellent job on the camo and straight barrels!

It wrecks the paint.

 

My Spartan had curly lascannons, which I straightene, ten they began to curve slightly after painting. I put them in boiling water to straighten them again and the paint went bubbly.

 

I wasn't sure if it was the heat or the water (or both). I would suggest getting some spare resin or sprue. Paint it then try heating with a hairdryer If the paint bubbles you haven't wrecked a model, if it works okay then you can go straighten out your Blood Angels.

 

Btw, that Sicaran is sweet..

  • 3 weeks later...

Finished this guy up this morning...

 

http://www.themightybrush.com/wp-content/uploads/2017/02/Blood-Angels-Furioso-Dreadnought-01-750x750.jpg

http://www.themightybrush.com/wp-content/uploads/2017/02/Blood-Angels-Furioso-Dreadnought-02-750x750.jpg

http://www.themightybrush.com/wp-content/uploads/2017/02/Blood-Angels-Furioso-Dreadnought-03-750x750.jpg

http://www.themightybrush.com/wp-content/uploads/2017/02/Blood-Angels-Furioso-Dreadnought-04-750x750.jpg

http://www.themightybrush.com/wp-content/uploads/2017/02/Blood-Angels-Furioso-Dreadnought-05-750x750.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.