Martox Posted April 5, 2015 Share Posted April 5, 2015 Good evening, B&C'ers With the release of Daemonkin, I thought it was time to revisit the first power armoured army I painted, many years ago - A Khorne Warband. This meant going back, finding the models I had and thinking 'oh hell, these are damaged/poorly painted - best strip em and repair em.' As such, there's a unit of converted Berserkers in a tub of Dettol at the moment steeping to paint removal. For now, it lets me build stuff and put in some one off kitbashes. So. The Eightscarred. Followers of a Bloodthirster of the 3rd level, so a Bloodthirster of Giant Axe swinging Death: Still need to tidy up the edge on that base, since it's covered in fingerprints. Probably need to add a few more sandbags and some sort of mesh for the base to make it look more like a trench system further. Now this guy is due to AD-B's book The Talon of Horus. Whilst not quite Ukris, I love the idea of a Khorne devotee with a heavy bolter blazing death as he marches towards the enemy. In terms of tabletop gameplay, probably not going to do so well. In terms of hobby and fluff fun, why not? The mouth needs some more work and general tidying up. Alt view of the heavy bolter barrel front And finally the work in progress of the Eightscarred's symbol pad. Been trying to get it to look symmetrical for a few days, so I've made a mould of the pad so far to try and cut down the remaining arrow points and apply them to the opposite sides, then recast the entire pad for duplication across the units that warrant it. Very, very WIP so far. Link to comment https://bolterandchainsword.com/topic/305643-martox-thread-of-wipness/ Share on other sites More sharing options...
Rev. Tiberius Jackhammer Posted April 5, 2015 Share Posted April 5, 2015 Nice work on the Khornate Havoc, aren't enough of those around, and nice WIP of the Warband symbol. Cool idea with mounting the Bloodthirster on a trench system, establishes ti as a 40k model. I actually enjoy the asymmetrical look the Eightscarred sigil has right now, looks pretty cool as-is. Link to comment https://bolterandchainsword.com/topic/305643-martox-thread-of-wipness/#findComment-3998801 Share on other sites More sharing options...
Martox Posted April 9, 2015 Author Share Posted April 9, 2015 Well, it's been an interesting week. Plenty of airbrushing on a unit, figuring out how to paint said unit, deciding I dislike this or that and going back. Settled on how to paint them and finally go them finished tonight. Biggest one is to leave the heads off when painting like this, it makes it a bunch easier to paint the bodies. At any rate, first unit of Bloodletters: And now, for the second unit and whilst I'm at it, figuring out how in the world I'm going to do a unit of Bloodcrushers. C&C welcomed! Cheers Link to comment https://bolterandchainsword.com/topic/305643-martox-thread-of-wipness/#findComment-4002977 Share on other sites More sharing options...
Martox Posted April 21, 2015 Author Share Posted April 21, 2015 Building stuff continues, 3 Bloodcrushers built, however, I've been building something else in the meantime... Opinions on proportion sought, as it stands I think it's close, however with the terminator true scale torso I'm not too sure. I'll upload some other angles later. Link to comment https://bolterandchainsword.com/topic/305643-martox-thread-of-wipness/#findComment-4016047 Share on other sites More sharing options...
Scribe Posted April 21, 2015 Share Posted April 21, 2015 Really like the way those Daemons came out. Link to comment https://bolterandchainsword.com/topic/305643-martox-thread-of-wipness/#findComment-4016053 Share on other sites More sharing options...
HighGothic Posted April 21, 2015 Share Posted April 21, 2015 Nice stuff. I thought about Daemonkin, it makes chaos a lot more interesting imo, but I'm sticking with my current army(s) Link to comment https://bolterandchainsword.com/topic/305643-martox-thread-of-wipness/#findComment-4016088 Share on other sites More sharing options...
Martox Posted April 21, 2015 Author Share Posted April 21, 2015 Pushing on with the prototype Wrathmonger-Berserker Champion. The head is a sticking point for me at the moment as it seems a bit small, which is a MASSIVE shame as these Wrathmonger heads are excellent. It's also going to be really tall for a power armoured model, Bloodletter for scale.Things still to do: add the ribbing instead of the chanmail to the legs, drill one/both the arms sides of the torso so I can add one of/both of the bare arms from the Wrathmonger kits. I'd love some feedback on the head, since it's just tacked in there at the moment. Link to comment https://bolterandchainsword.com/topic/305643-martox-thread-of-wipness/#findComment-4016255 Share on other sites More sharing options...
KrautScientist Posted April 22, 2015 Share Posted April 22, 2015 This is a very cool idea -- I've just been messing around with the same set of legs and a leftover, damaged Chaos Terminator torso due to your idea, and I think I might end up with a very cool true scale-ish World Eater! Thanks for the inspiration! One additional idea: It seems to me that, by slightly shaving down the breastplate, you could even fit the original Skullreaper breastplate (and hip plates) over the Terminator chest piece -- that's the route I'll be going with my own model, I think. Link to comment https://bolterandchainsword.com/topic/305643-martox-thread-of-wipness/#findComment-4016873 Share on other sites More sharing options...
Martox Posted April 22, 2015 Author Share Posted April 22, 2015 Cheers KS, glad to know our ideas are bouncing off each other for mutual inspiration :D At any rate, I intend to use a bit of instant mold to cast up the details from the front plates of the Wrathmongers and then (hopefully) curve it to match the terminator torso. It should work if I can get the details to match correctly. Should.I'm looking forward to getting back from work to get some more work done on this tonight, specifically seeing if I can get the bare arm/arms to fit with the idea I've had (see - Ferrus/Khârn for what I mean). I just hope I've got some suitable shoulder pads. Maybe from the old Marauders..Check back later for more progress! Link to comment https://bolterandchainsword.com/topic/305643-martox-thread-of-wipness/#findComment-4016914 Share on other sites More sharing options...
KrautScientist Posted April 22, 2015 Share Posted April 22, 2015 The bare arms from the warshrine priest should also work great -- that's what I'll be using, because I still have a right arm left from that model. Link to comment https://bolterandchainsword.com/topic/305643-martox-thread-of-wipness/#findComment-4016917 Share on other sites More sharing options...
Martox Posted April 22, 2015 Author Share Posted April 22, 2015 Your idea with the shaved down chest piece came to mind as I was figuring out if I needed to drill into the torso for the arm (I don't IMHO, photo later) and I put the chest plate up to the torso as it is now.Would save a whole lot of hassle to cut down the torso and it would look good.... photos in a bit. Link to comment https://bolterandchainsword.com/topic/305643-martox-thread-of-wipness/#findComment-4017182 Share on other sites More sharing options...
Martox Posted April 22, 2015 Author Share Posted April 22, 2015 Here's tonight's progress - added the bare arms and the Axe of Khorne, filled in a few gaps and added some testers for shoulder pads. Not full marine pads, these are taken from the Marauder kit. Changed my mind on the torso, just greenstuff molding it.The greenstuff on the left arm will be part of a gauntlet - the power armoured hand is one of the ones holding a chainsword. The torso cover is currently curing before I add it to the front. I'll also be adding the side plates from the torso cover of the Wrathmonger kit to cover some gaps and givei t that heavier armoured look. Do still need to fill in the back of the legs for power armour, so ribbing and a bit heavier plating. Still undecided on the head, a power armoured one would work better for scale - but the Wrathmonger one is too good! Might have to kitbash em together. Link to comment https://bolterandchainsword.com/topic/305643-martox-thread-of-wipness/#findComment-4017343 Share on other sites More sharing options...
Martox Posted April 23, 2015 Author Share Posted April 23, 2015 Triple post huh - well, good thing I've got a built model then, eh? C&C welcome Link to comment https://bolterandchainsword.com/topic/305643-martox-thread-of-wipness/#findComment-4018558 Share on other sites More sharing options...
Kriegsmacht Posted April 23, 2015 Share Posted April 23, 2015 Nice conversion there. Really like the helmet and the axe. Link to comment https://bolterandchainsword.com/topic/305643-martox-thread-of-wipness/#findComment-4018569 Share on other sites More sharing options...
paz Posted April 23, 2015 Share Posted April 23, 2015 fantastic! I've been eyeing up those figs for berserkers or some such for my Wrath daemonkin. Only problem is you only get 5... Link to comment https://bolterandchainsword.com/topic/305643-martox-thread-of-wipness/#findComment-4018577 Share on other sites More sharing options...
MordentHex Posted April 26, 2015 Share Posted April 26, 2015 This is good stuff. keep it up! Khorne loves you! Link to comment https://bolterandchainsword.com/topic/305643-martox-thread-of-wipness/#findComment-4020674 Share on other sites More sharing options...
Martox Posted April 26, 2015 Author Share Posted April 26, 2015 Cheers for the comments guys :D The weekends work, 1 Herald of Khorne. I love these Wrathmonger kits. C&C welcome as always. Cheers! Link to comment https://bolterandchainsword.com/topic/305643-martox-thread-of-wipness/#findComment-4021043 Share on other sites More sharing options...
Wolfmerc Posted April 29, 2015 Share Posted April 29, 2015 Liking the herald! might need to fill in the back of the head though. Link to comment https://bolterandchainsword.com/topic/305643-martox-thread-of-wipness/#findComment-4023593 Share on other sites More sharing options...
Draakur Posted April 29, 2015 Share Posted April 29, 2015 Hot stuff! Both are looking amazing :) Link to comment https://bolterandchainsword.com/topic/305643-martox-thread-of-wipness/#findComment-4023674 Share on other sites More sharing options...
Targetlock Posted April 29, 2015 Share Posted April 29, 2015 great stuff :) now I'm tempted towards the wrathmongers hehe Link to comment https://bolterandchainsword.com/topic/305643-martox-thread-of-wipness/#findComment-4024109 Share on other sites More sharing options...
Martox Posted May 22, 2015 Author Share Posted May 22, 2015 I return, after a hiatus. I went back and worked a project I started last year when they were originally released: I present the Sword of the Dawn, my first Freeblade Knight to be attached to my guard/Iron Hands. Base is pending.The second Knight is currently being built and I'm currently mulling over the heraldry/colour scheme/whether I want to weather the second as much as the first.C&C welcome, as ever. Cheers Link to comment https://bolterandchainsword.com/topic/305643-martox-thread-of-wipness/#findComment-4053884 Share on other sites More sharing options...
Martox Posted July 16, 2015 Author Share Posted July 16, 2015 I'm back!One month (and a bit :S) later and the Age of Sigmar brings me some fun models to convert with the method Kraut and myself messed about with a while ago. Some minor changes include sculpting the ribbed undersuit rather than chainmail, as well as some extra bulk to the armour to make it look more like powered armour. So, first of the test batch is the Khorne Lord from the AoS box, as he stands ATM: C&C welcome Link to comment https://bolterandchainsword.com/topic/305643-martox-thread-of-wipness/#findComment-4124363 Share on other sites More sharing options...
Martox Posted July 22, 2015 Author Share Posted July 22, 2015 Well, after the server downtime [Praise Brother Argus for repairs!] I had some time to work on the Lord; here's how he stands at the moment: Notable change is the arm, the scorpion claw just didn't make sense for the large axe. He wouldn't be able to wield it properly IMHO. The hand holding the chains has been switched for a plasma pistol, because necessary. He still needs a belt buckle and a backpack - the backpack is causing some issue as I'm trying to think of how to make one look ornate enough to match the style of the armour. The Fleshhound has been built but unconverted, bar removal of the chains. Link to comment https://bolterandchainsword.com/topic/305643-martox-thread-of-wipness/#findComment-4125521 Share on other sites More sharing options...
Brother Mayhem Posted July 22, 2015 Share Posted July 22, 2015 I love that lord, I was thinking of picking one up and sticking him on a Juggernaut. All those fantasy bits really make these models stand out! Link to comment https://bolterandchainsword.com/topic/305643-martox-thread-of-wipness/#findComment-4125556 Share on other sites More sharing options...
Martox Posted July 27, 2015 Author Share Posted July 27, 2015 Been working on the AoS standard bearer for the past couple of days - removing the furs and clothing in favour of power armour styled detailing to the back. Next comes the difficult part, the torso. I'm wanting to keep the skulls that are normally on the front of the model, so sculpting in a chest plate might prove a bit interesting. Not too happy with parts of him, particularly the inside of the right knee at the moment and the general smoothness of some of the plates. C&C welcome as always.Cheers! Link to comment https://bolterandchainsword.com/topic/305643-martox-thread-of-wipness/#findComment-4129776 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.