omgitsduane Posted October 20, 2017 Author Share Posted October 20, 2017 After a long hiatus we are back with more! Had been sketching stuff out for a little while in prep for a crashed space hulk board. terminatorAM and Honda 2 Back to top Link to comment https://bolterandchainsword.com/topic/328611-district-terra-wip/page/3/#findComment-4913132 Share on other sites More sharing options...
omgitsduane Posted October 20, 2017 Author Share Posted October 20, 2017 Construction has been a difficult issue. Making sure the foamcard is cut to the right angles so it can slide down the angled walls of the space hulk. The customer had this hex piece of foam laying about as he wanted his army to be able to connect with other display boards down the road. Details inside the rear. From the start I wanted this to be a very open piece so there is more room for the customer to keep his models. It adds another dimension when you come around the side and see a unit of scouts hiding out behind the walls of the hulk. The whole thing came together really fast once I had the floors erected. trying to get crisp straight edges has always been difficult for me with the tools I have but I was really happy with the flush top of this. deathspectersgt7 and Brother Carn 2 Back to top Link to comment https://bolterandchainsword.com/topic/328611-district-terra-wip/page/3/#findComment-4913138 Share on other sites More sharing options...
Bjorn Firewalker Posted October 20, 2017 Share Posted October 20, 2017 The cannon looks beautiful! Link to comment https://bolterandchainsword.com/topic/328611-district-terra-wip/page/3/#findComment-4913585 Share on other sites More sharing options...
omgitsduane Posted October 26, 2017 Author Share Posted October 26, 2017 The cannon looks beautiful! Thanks. It came together super fast once I had the structure built. Details on the internal floors. Lots of fun widgets and mechanisms purchased from a mate of mine who does laser cutting @ miniaturescenery.com The door details were really fun to try and find pieces that would form a mechanism to close and open the doors. I have filled the bottom up with expanding foam so give the impression of wind swept sands into the cavity below the crashed ship. I've been told that Range https://www.therange.co.uk/ in the UK has the foamboard as well as Hobbycraft. Honda and deathspectersgt7 2 Back to top Link to comment https://bolterandchainsword.com/topic/328611-district-terra-wip/page/3/#findComment-4917834 Share on other sites More sharing options...
omgitsduane Posted October 31, 2017 Author Share Posted October 31, 2017 We begin with the blue texture!!!! This is rendering paint, as I get a lot of questions about it and it's changed the way I do hobby. No lies. It's a thick texture that you can paint on wherever you need it, add grainy rocky desert or even thinned down can create small rusting effects. I have used it on every piece I've made since we got it and I don't intend to go back to sanding with PVA ever again. The sand will help cover the unsightly expanding foam, plus protect the actual soft foam edges from damages during spray. Because its painted on, you can use it to create drift and flow through the areas you want it quite easily too! Link to comment https://bolterandchainsword.com/topic/328611-district-terra-wip/page/3/#findComment-4921095 Share on other sites More sharing options...
omgitsduane Posted November 2, 2017 Author Share Posted November 2, 2017 We added a lot more work to the front of the board for the models to blend in with, plus the customers basing is very debris heavy. Back of the board needs attention too! We got around to spray painting finally. The assembly coming apart for ease of painting was a great idea. I'm super happy that it actually worked as well as I hoped. apologist, Brother Dallo, deathspectersgt7 and 2 others 5 Back to top Link to comment https://bolterandchainsword.com/topic/328611-district-terra-wip/page/3/#findComment-4922523 Share on other sites More sharing options...
DaBoiKyknos Posted November 2, 2017 Share Posted November 2, 2017 (edited) Dude, your terrain-game is top-notch! If it´s Eldar or human worlds, this looks really convincing! Edited November 16, 2017 by LordVelype Link to comment https://bolterandchainsword.com/topic/328611-district-terra-wip/page/3/#findComment-4922571 Share on other sites More sharing options...
omgitsduane Posted November 5, 2017 Author Share Posted November 5, 2017 Dude, your terrain-game is top knotch! If it´s Eldar or human worlds, this looks really convincing! Thank you. We're always trying to push ourselves with each build. Learn by doing and making things a little more complex each time. We began with trying to shade areas I felt would have a lot of sand coverage and flow from the winds as well as obviously painting the sand itself. Very dark at first. Laying down some basic colors other than sand. The purple strip was to help establish the space hulk as part of the customers army as he has a purple themed Blood Angels legion. Gradually getting lighter as we went on. Lexington, deathspectersgt7, CyderPirate and 1 other 4 Back to top Link to comment https://bolterandchainsword.com/topic/328611-district-terra-wip/page/3/#findComment-4924723 Share on other sites More sharing options...
Lexington Posted November 5, 2017 Share Posted November 5, 2017 This so completely rules. Excellent job. Link to comment https://bolterandchainsword.com/topic/328611-district-terra-wip/page/3/#findComment-4925202 Share on other sites More sharing options...
Bjorn Firewalker Posted November 6, 2017 Share Posted November 6, 2017 The area under the crashed starship is unusually smooth. Is the blue "ground" meant to be water, i.e., the wreck is partially submerged? Link to comment https://bolterandchainsword.com/topic/328611-district-terra-wip/page/3/#findComment-4925281 Share on other sites More sharing options...
omgitsduane Posted November 13, 2017 Author Share Posted November 13, 2017 The area under the crashed starship is unusually smooth. Is the blue "ground" meant to be water, i.e., the wreck is partially submerged? The blue is texture paint nothing more. I have done a smoother ground as I imagine this vessel to be dug in deep to the sandbed and what's exposed is almost the tip of the iceberg. The sand has slowly moved in and against the ship and eventually flattened out the area around it. This so completely rules. Excellent job. Thank you so much!!! Im glad you're enjoying it. Link to comment https://bolterandchainsword.com/topic/328611-district-terra-wip/page/3/#findComment-4930496 Share on other sites More sharing options...
omgitsduane Posted November 14, 2017 Author Share Posted November 14, 2017 It all starts really coming together at this point. Weathering powders, tones with the airbrush, grease and oils and machinery colors. The gun carraige I was really proud of, the movement of it also adds a lot with the gun being able to rotate and elevate. Very dark and grim looking pipelines with gauges and sanded internals. Carrack, deathspectersgt7, DuskRaider and 2 others 5 Back to top Link to comment https://bolterandchainsword.com/topic/328611-district-terra-wip/page/3/#findComment-4931452 Share on other sites More sharing options...
deathspectersgt7 Posted November 14, 2017 Share Posted November 14, 2017 Link to comment https://bolterandchainsword.com/topic/328611-district-terra-wip/page/3/#findComment-4931515 Share on other sites More sharing options...
Bjorn Firewalker Posted November 16, 2017 Share Posted November 16, 2017 As a gun nut, I can't help but wonder what kind of ammo casing you used to make the cannon projectile. (The markings on the case aren't legible in the photo.) It's clearly rimmed, so is it from a .303 British round? 7.62x54mm R Russian? Link to comment https://bolterandchainsword.com/topic/328611-district-terra-wip/page/3/#findComment-4933492 Share on other sites More sharing options...
omgitsduane Posted November 21, 2017 Author Share Posted November 21, 2017 As a gun nut, I can't help but wonder what kind of ammo casing you used to make the cannon projectile. (The markings on the case aren't legible in the photo.) It's clearly rimmed, so is it from a .303 British round? 7.62x54mm R Russian? I have a mate that owns a .303 rifle so your guess would be right. I have a whole bunch of .22 and .303 he gave me as they are brutal scale for 40k. The .22 shells fit perfectly into vindicator style cannons. Link to comment https://bolterandchainsword.com/topic/328611-district-terra-wip/page/3/#findComment-4936850 Share on other sites More sharing options...
omgitsduane Posted November 22, 2017 Author Share Posted November 22, 2017 More painting work. Refinement and other painting effects to be done to bring the grimdark up a few notches so its seen. A nice angle shot here from the side and getting a little into the depth of the actual ship. A closer shot with the rusting on the backs of the pipes and layers of dirt we piled up. Internals of some compartments. Really happy with the hundreds of straws that died for this board and the MDF bits haha. Some work on the cannon emplacement. Absolutely stoked with how this turned out. Couldn't have been more pleased. deathspectersgt7, brettfp and robofish7591 3 Back to top Link to comment https://bolterandchainsword.com/topic/328611-district-terra-wip/page/3/#findComment-4937841 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now