Kierdale Posted April 22, 2021 Author Share Posted April 22, 2021 Thanks. I finished the red on their guns and weathered it today. I’ll start on their tattoos tomorrow and after that I want to add some tire-armour to them. The old shoulder pad here and there. The nobs are taking longer as with that lovely flat armour there is plenty of room for freehand and decoration. If the beast snaggas are monopose, at least I’ve got plenty of spare savage orc bitz :tu: Earlier this year I got a second box of Boyz and of Savage Orcs so I’ve got plenty to be working on. I got a box of tyranid gargoyles too so I can make my stormboys squad. I might do them after finishing this Boyz Mob and the Nobz Mob. You are quite right that it might turn out considerably cheaper to use savage orca if you got plenty of spare Ork bitz. Hopefully the Beasr Snaggas won’t be too expensive or are people simply will do the conversion. MithrilForge 1 Back to top Link to comment https://bolterandchainsword.com/topic/336550-waaargh-grimsnaga-smasha-squig/page/9/#findComment-5691297 Share on other sites More sharing options...
Kierdale Posted April 23, 2021 Author Share Posted April 23, 2021 Now starting their tattoos. Some will have red ones, some blue, some none perhaps. I might do the Wierdboy with near-full body tattoos. Dumah, Warhead01, Spazmolytic and 2 others 5 Back to top Link to comment https://bolterandchainsword.com/topic/336550-waaargh-grimsnaga-smasha-squig/page/9/#findComment-5691556 Share on other sites More sharing options...
Kierdale Posted April 27, 2021 Author Share Posted April 27, 2021 Tattoos are done. I’m now doing the nob’s backbanner, and adding some armour to a few of them. Some have bits of tire bolted into their flesh, others plates from Necron torsos. Warbringer, MithrilForge, Dumah and 1 other 4 Back to top Link to comment https://bolterandchainsword.com/topic/336550-waaargh-grimsnaga-smasha-squig/page/9/#findComment-5692631 Share on other sites More sharing options...
MithrilForge Posted April 28, 2021 Share Posted April 28, 2021 AWESOME...as usual really want to see all these orks mobbed up in a unit... Mithril Kierdale 1 Back to top Link to comment https://bolterandchainsword.com/topic/336550-waaargh-grimsnaga-smasha-squig/page/9/#findComment-5692883 Share on other sites More sharing options...
Dumah Posted April 28, 2021 Share Posted April 28, 2021 Daaaamn...the lats on those guys! Gym goals for sure. Krump yeah! Kierdale 1 Back to top Link to comment https://bolterandchainsword.com/topic/336550-waaargh-grimsnaga-smasha-squig/page/9/#findComment-5692894 Share on other sites More sharing options...
Kierdale Posted April 30, 2021 Author Share Posted April 30, 2021 Thanks! The squad are all done except for the snake and the nob’s back banner, which is currently work in progress: DaBoiKyknos, MithrilForge and 01RTB01 3 Back to top Link to comment https://bolterandchainsword.com/topic/336550-waaargh-grimsnaga-smasha-squig/page/9/#findComment-5693507 Share on other sites More sharing options...
Kierdale Posted May 2, 2021 Author Share Posted May 2, 2021 The boyz mob is finished....and I’ll take some pics when I get the light box out. Soon. Today, I hope. In the meantime work continues on the nobz mob, and I started painting the counts-as-Squiggoth Dino. I did the underside the same as the lizard skin on some of the boyz: Jokaero Orange basecoat. Luggnath Orange Drybrush (kindleflame is the same, I think) Flayed One Flesh Drybrush on the very underside Reikland Fleshshade wash. I’ll do the upper carapace in Mars-red, similar to the basing. I was tempted to the the skin dark, thinking that the beastly would have the red back armour as protection and camouflage, able to crouch down and look like a rock, and the dark skin underneath would look like shadow...but on the other hand the skin down there is nicely textured and I didn’t want to lose that in dark colours. Perhaps at night or when threatened the beastie buries itself in sand/regolith, just leaving its armoured carapace showing. :) Anyway, I’m going to put metal supports bolted into the carapace and a bit of a platform atop it. Only a bit as I want to make the howdah itself interchangeable. First a basic one with a driver, a kannon and one or two crew, to count as a Squiggoth...and have that detachable (magnets, maybe ;) ) so I can if the whim takes me replace it with a (make-later) huge howdah bristling with weapons and have the thing count as a Mork/Gorkanaut. :D I bought a Knight-sized base for mounting it. Warhead01 and MithrilForge 2 Back to top Link to comment https://bolterandchainsword.com/topic/336550-waaargh-grimsnaga-smasha-squig/page/9/#findComment-5694004 Share on other sites More sharing options...
Kierdale Posted May 2, 2021 Author Share Posted May 2, 2021 The squad is done! Nob, Grimsnik His banner was heavily inspired by Waaargh Da Orks/Ere We Go/Freebooters. Can anyone translate/read the glyphs on his backbanner? ;) Snakebite biting a snake. More to come tomorrow. Must sleep now! MithrilForge, Warhead01 and Azaiel 3 Back to top Link to comment https://bolterandchainsword.com/topic/336550-waaargh-grimsnaga-smasha-squig/page/9/#findComment-5694120 Share on other sites More sharing options...
Magos Takatus Posted May 2, 2021 Share Posted May 2, 2021 I like how you've integrated Ork glyphs into your banner. Seems to be 'Ere we Go written on there. Apparently he's also not that fond of the Eldar. :D I'm not usually that fond of the Snakebite aesthetic but those tattoos and banners are so well executed. Nice work! Kierdale and MithrilForge 2 Back to top Link to comment https://bolterandchainsword.com/topic/336550-waaargh-grimsnaga-smasha-squig/page/9/#findComment-5694128 Share on other sites More sharing options...
Kierdale Posted May 3, 2021 Author Share Posted May 3, 2021 It is indeed “Ere We Go!”. I see that you are a learned man of culture! :D Thank you! And here’s the rest of the mob: Drummer boy, with tire armour and holstered slugga. I did the cord around his left wrist black/yellow, imagining he’d pulled wire from inside something AdMech and decided to wrap it around his wrist. Some of the others have it holding weapons together. “Witness me!” And Gunslinger And the rest... MithrilForge, DaBoiKyknos, Dumah and 1 other 4 Back to top Link to comment https://bolterandchainsword.com/topic/336550-waaargh-grimsnaga-smasha-squig/page/9/#findComment-5694273 Share on other sites More sharing options...
MithrilForge Posted May 3, 2021 Share Posted May 3, 2021 Wow...when you see this pic - you get an idea how close to apes they have modelled their faces ... either that or its your awesome paintjobs! I dig the black & yellow electrical cable used as wrapping I giggled when i read 'Witness me!" ... Great work. cheers, Mithril Kierdale 1 Back to top Link to comment https://bolterandchainsword.com/topic/336550-waaargh-grimsnaga-smasha-squig/page/9/#findComment-5694297 Share on other sites More sharing options...
Evil Eye Posted May 3, 2021 Share Posted May 3, 2021 Now those are some proper boyz! Dumah and Kierdale 2 Back to top Link to comment https://bolterandchainsword.com/topic/336550-waaargh-grimsnaga-smasha-squig/page/9/#findComment-5694353 Share on other sites More sharing options...
Azaiel Posted May 4, 2021 Share Posted May 4, 2021 Superb work! Kierdale 1 Back to top Link to comment https://bolterandchainsword.com/topic/336550-waaargh-grimsnaga-smasha-squig/page/9/#findComment-5694605 Share on other sites More sharing options...
Kierdale Posted May 5, 2021 Author Share Posted May 5, 2021 Thank you very much for the kind comments. And yes, now you mention it, they look rather ape-like there! I’m working on my dino base but unfortunately my go-to oxide paint had run out... So brushed on some oxide craft paint. And applied crackle paint. Which cracked nicely! There was a bit of touching up to do, then drybrushing and doing the exposed Necron terrain. Now to put the Dino on there... MithrilForge, toaae and Ammonius 3 Back to top Link to comment https://bolterandchainsword.com/topic/336550-waaargh-grimsnaga-smasha-squig/page/9/#findComment-5695046 Share on other sites More sharing options...
toaae Posted May 5, 2021 Share Posted May 5, 2021 That base is hot. Real good job on it. Kierdale 1 Back to top Link to comment https://bolterandchainsword.com/topic/336550-waaargh-grimsnaga-smasha-squig/page/9/#findComment-5695483 Share on other sites More sharing options...
Kierdale Posted May 6, 2021 Author Share Posted May 6, 2021 Thanks! I added a bit more decoration... Once he is painted (hopefully tonight) I will use crackle paint around the edges to make it look like he is being stomped into the ground :D Dumah, Warhead01, DaBoiKyknos and 1 other 4 Back to top Link to comment https://bolterandchainsword.com/topic/336550-waaargh-grimsnaga-smasha-squig/page/9/#findComment-5695585 Share on other sites More sharing options...
MithrilForge Posted May 6, 2021 Share Posted May 6, 2021 oof that necron is getting some serious Shiatsu massage there ! as usual this is cool and awesome. Mithril DaBoiKyknos 1 Back to top Link to comment https://bolterandchainsword.com/topic/336550-waaargh-grimsnaga-smasha-squig/page/9/#findComment-5695646 Share on other sites More sharing options...
Kierdale Posted May 10, 2021 Author Share Posted May 10, 2021 :D That indeed would be quite some shiatsu! Here’s the driver for the Dino/squiggoth: He’ll have chains from the stick in his right hand, to the dino’s mouth (or more likely anchored into the shell/armour on each side of its head). I gave him a huge snake on his head as I figured whoever gets to drive such an important beastie is probably someone important, and gave him a decently long weapon so he can take heads from his perch. MithrilForge and Dumah 2 Back to top Link to comment https://bolterandchainsword.com/topic/336550-waaargh-grimsnaga-smasha-squig/page/9/#findComment-5697729 Share on other sites More sharing options...
Guest Triszin Posted May 10, 2021 Share Posted May 10, 2021 dino!!!! Link to comment https://bolterandchainsword.com/topic/336550-waaargh-grimsnaga-smasha-squig/page/9/#findComment-5698047 Share on other sites More sharing options...
Kierdale Posted May 10, 2021 Author Share Posted May 10, 2021 I was looking around for things to use as the base of the howdah (I want to make it from all kinds of bitz in proppa Orky fashion) and realised that my Aegis defence line has not seen the light of day in many years... and two of the small pieces, bottom-to-bottom are an absolute perfect fit for the back of the dinosaur: The driver will go on a small platform in front of this, and the crew and kannon on top of plates welded to the top of these Aegis sections. Then I had an idea... Triple the floor space. Spikes and barbed wire around the edge. I could build up the middle even more and go for a counts-as Gorkanaut or Morkanaut... Make it a real centrepiece for the army. Warhead01, Holier Than Thou, Dumah and 2 others 5 Back to top Link to comment https://bolterandchainsword.com/topic/336550-waaargh-grimsnaga-smasha-squig/page/9/#findComment-5698100 Share on other sites More sharing options...
MithrilForge Posted May 11, 2021 Share Posted May 11, 2021 I love where this is going !! Mithril Kierdale 1 Back to top Link to comment https://bolterandchainsword.com/topic/336550-waaargh-grimsnaga-smasha-squig/page/9/#findComment-5698170 Share on other sites More sharing options...
Kierdale Posted May 11, 2021 Author Share Posted May 11, 2021 Thanks. I think I’m gonna do both options. I’ll make the howdahs removable. The smaller one will have a couple of crew and a kannon so it’ll count as a Squiggoth, and as for the bigger one I’m going to build up a turret in the middle of it and make it a Morkanaut. :D Link to comment https://bolterandchainsword.com/topic/336550-waaargh-grimsnaga-smasha-squig/page/9/#findComment-5698188 Share on other sites More sharing options...
Holier Than Thou Posted May 11, 2021 Share Posted May 11, 2021 This looks fantastic. Can’t wait to see it finished. Link to comment https://bolterandchainsword.com/topic/336550-waaargh-grimsnaga-smasha-squig/page/9/#findComment-5698192 Share on other sites More sharing options...
Kierdale Posted May 11, 2021 Author Share Posted May 11, 2021 Thanks. It’s going to take a loooooong time to do so I think it’s something I’ll be returning to from time to time. Today’s lunch hammer was four of my nine nobz mob. Weathering their armour and highlighting the three power stabbas. I’ll weather the other five’s armour tomorrow. It has taken a long time to do all the freehand on them. MithrilForge, Dumah, Warhead01 and 1 other 4 Back to top Link to comment https://bolterandchainsword.com/topic/336550-waaargh-grimsnaga-smasha-squig/page/9/#findComment-5698250 Share on other sites More sharing options...
Kierdale Posted May 13, 2021 Author Share Posted May 13, 2021 I finished the nobs’ armour yesterday and will do their skin today. I got a bit more work done on the DinoMorkanaut: Still got so much to do, but I’m going to be getting the Underworlds Savage Orruk band this weekend and converting them before finishing this. Warhead01, Dumah and MithrilForge 3 Back to top Link to comment https://bolterandchainsword.com/topic/336550-waaargh-grimsnaga-smasha-squig/page/9/#findComment-5698849 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now