Sword Brother Adelard Posted April 28, 2020 Share Posted April 28, 2020 Too small, IMO. I don't think so. The legs are longer than a boxnaught's and almost as wide. Link to comment https://bolterandchainsword.com/topic/353010-in-service-of-the-death-lord-duskraiders-at-project/page/12/#findComment-5513753 Share on other sites More sharing options...
schoon Posted May 1, 2020 Share Posted May 1, 2020 The Storm Eagle is a Forumware kit. I found it on eBay a long time ago and haven't seen one since, unfortunately. Honestly, Xiphons or even the Imperialis Aeronautica models would probably be a better mod for the Strategem (and it just so happens that there's a crashed Xiphon on the FW board), but u hate the Xiphon design, there was no IA at that time, and I really like the Storm Eagle design. Really like the Storm Eagle design myself, and I figure it's only a matter of time till GW/FW gets around to doing it for Aeronautica. There's always this on Thingiverse for those that aren't good at waiting... Sword Brother Adelard 1 Back to top Link to comment https://bolterandchainsword.com/topic/353010-in-service-of-the-death-lord-duskraiders-at-project/page/12/#findComment-5515650 Share on other sites More sharing options...
malika666 Posted May 3, 2020 Share Posted May 3, 2020 Or if you dont have a 3d printer, there are always proxies... https://vanguardminiatures.co.uk/shop/novan-elites-wyvern-light-dropship/ https://vanguardminiatures.co.uk/shop/novan-elites-javelin-fighter/ https://vanguardminiatures.co.uk/shop/novan-elites-spiculum-heavy-fighter/ Link to comment https://bolterandchainsword.com/topic/353010-in-service-of-the-death-lord-duskraiders-at-project/page/12/#findComment-5516160 Share on other sites More sharing options...
DuskRaider Posted February 8, 2021 Author Share Posted February 8, 2021 Hey everyone, Well I'm back. After probably the worst year of my life I have decided to pick up the paintbrush again and my first dip into the waters that are the hobby is Titanicus. For the past two weeks I have been assembling two Warbringers (the two from last year technically), another Reaver and finally 16 Cerastus Knights for House Makabius (8 x Acheron and 8 x Castigator). I've been a busy little bee with these and have no only sub-assembled but have painted the metal and black, red and (some) white on the armour panels. The worst part is now to come with the trim but hopefully soon I'll have some new models to show off, albeit most likely not based as I'm still figuring out what supplies I've lost and whatnot. Keep your eyes peeled, I hope this will be worth it. 1ncarnadine, Brother Dallo, General Zodd and 1 other 4 Back to top Link to comment https://bolterandchainsword.com/topic/353010-in-service-of-the-death-lord-duskraiders-at-project/page/12/#findComment-5665178 Share on other sites More sharing options...
Mandragola Posted February 8, 2021 Share Posted February 8, 2021 (edited) Awesome that you’re back. Sorry you had a crap year. Let’s hope 2021 is better. Edited February 8, 2021 by Mandragola Link to comment https://bolterandchainsword.com/topic/353010-in-service-of-the-death-lord-duskraiders-at-project/page/12/#findComment-5665181 Share on other sites More sharing options...
Brother Dallo Posted February 8, 2021 Share Posted February 8, 2021 Welcome back DuskRaider. Yeah, 2020 wasn’t a great year in general. Here’s to 2021. Looking forward to seeing your progress. Dallo Link to comment https://bolterandchainsword.com/topic/353010-in-service-of-the-death-lord-duskraiders-at-project/page/12/#findComment-5665226 Share on other sites More sharing options...
DuskRaider Posted February 8, 2021 Author Share Posted February 8, 2021 Thanks guys! Yeah, I have hopes that 2021 will be a better year. I'm now remembering how much I hate doing the trim on these... ugh. I should be done with the three Titans by week's end then I'll move on to the Banners. I'm really hoping GW releases the Warmaster soon... it may be pointless in normal games but I'm really looking forward to painting it up. Link to comment https://bolterandchainsword.com/topic/353010-in-service-of-the-death-lord-duskraiders-at-project/page/12/#findComment-5665478 Share on other sites More sharing options...
Mandragola Posted February 8, 2021 Share Posted February 8, 2021 Yeah I'm looking forward to the warmaster too. We won't get them for a while though. If they're previewed in two sundays' time they'll go on preorder the week after that, so we're talking at least a month. Plenty of time for us to work on our existing piles of grey plastic. I do shudder to think of people attempting to build the legs on those things. The AT community is excellent in many ways, but reading instructions does not seem to be one of our collective strong suits. Sword Brother Adelard 1 Back to top Link to comment https://bolterandchainsword.com/topic/353010-in-service-of-the-death-lord-duskraiders-at-project/page/12/#findComment-5665484 Share on other sites More sharing options...
DuskRaider Posted July 25, 2023 Author Share Posted July 25, 2023 It’s been a long LONG time since I’ve updated this or even picked up a brush but here we are… I’ve finally found the time and motivation to get back into the hobby, a big part thanks to Legions Imperialis. I had actually started work on my horde of Makabius Knights a few months back but never finished. Once I got to the trim I lost all motivation to keep going. I loathe painting trim and I hate gold paint even more (it seems to coagulate very quickly). I decided to go big with my re-introduction and have been working on my Warmaster for the past couple weeks now. It’s almost complete, I’m just painting the Plasma coils and adding decals and it’s on to the base. I’m usually not a big fan of posting WIP photos but I’m hoping it’ll give me the push I need to see this through and onto the ridiculous amount of other Titans and Knights I need to complete. Fingers crossed. Next I have 8 Acheron, 8 Castigators, 6 or so Questoris, 2 Acastus, 2 Warbringers and 3 Reavers that are in various stages of assembly and painting. Wish me luck! Noserenda, Shovellovin, LameBeard and 1 other 4 Back to top Link to comment https://bolterandchainsword.com/topic/353010-in-service-of-the-death-lord-duskraiders-at-project/page/12/#findComment-5975359 Share on other sites More sharing options...
Shovellovin Posted July 25, 2023 Share Posted July 25, 2023 You picked a good time to resurrect this thread. Like you and plenty of others, LI has rekindled my interest in AT. I’m looking forward to seeing your warmaster completed and what you have planned for LI. Link to comment https://bolterandchainsword.com/topic/353010-in-service-of-the-death-lord-duskraiders-at-project/page/12/#findComment-5975420 Share on other sites More sharing options...
DuskRaider Posted July 26, 2023 Author Share Posted July 26, 2023 Welp… there we go. I present Cadaver Domini, Carrion Lord. “Eternum Vigilate Portas Perditionis“ There’s some details here and there that I still need to do such as barrel and exhaust soot and give it a matte coat, but otherwise it’s done. tinpact, Kythnos, Spazmolytic and 5 others 7 1 Back to top Link to comment https://bolterandchainsword.com/topic/353010-in-service-of-the-death-lord-duskraiders-at-project/page/12/#findComment-5975509 Share on other sites More sharing options...
nilsh Posted July 26, 2023 Share Posted July 26, 2023 That's some really nice painting and I completely agree on the dislike for painting trim, not something I'm looking forward to on my Legions Imperialis models. DuskRaider 1 Back to top Link to comment https://bolterandchainsword.com/topic/353010-in-service-of-the-death-lord-duskraiders-at-project/page/12/#findComment-5975549 Share on other sites More sharing options...
DuskRaider Posted July 27, 2023 Author Share Posted July 27, 2023 The Imperialis models *should* be easier. The one (and as far as I’m concerned only) advantage to Mk. VI armor is that there’s barely any trim. I’m now moving on to the Warbringers and Reaver that I started painting over two years ago. Of course really the only thing they need is the trim… Link to comment https://bolterandchainsword.com/topic/353010-in-service-of-the-death-lord-duskraiders-at-project/page/12/#findComment-5975958 Share on other sites More sharing options...
Urauloth Posted July 27, 2023 Share Posted July 27, 2023 Glad to see you back! Looking forward to seeing some more of your Makabius knights, they're some of my favourite things on this site. DuskRaider 1 Back to top Link to comment https://bolterandchainsword.com/topic/353010-in-service-of-the-death-lord-duskraiders-at-project/page/12/#findComment-5975997 Share on other sites More sharing options...
DuskRaider Posted July 27, 2023 Author Share Posted July 27, 2023 10 hours ago, Urauloth said: Glad to see you back! Looking forward to seeing some more of your Makabius knights, they're some of my favourite things on this site. I hope you mean AT Knights and not 40K, lol. I still have my Knight Abominant sitting in subassembly and only somewhat painted to this day. The horde of Knights will be next on the list for completion… or at the very least, the Cerastus will be. I believe the Questoris are assembled but not primed and the Acastus aren’t even assembled. Hell, I still have a city’s worth of buildings that need to be primed and painted along with the Realm of Battle board. So much stuff… Urauloth 1 Back to top Link to comment https://bolterandchainsword.com/topic/353010-in-service-of-the-death-lord-duskraiders-at-project/page/12/#findComment-5976200 Share on other sites More sharing options...
Mandragola Posted July 28, 2023 Share Posted July 28, 2023 Great to see you back. I hope LI turns out to be as good as we all want it to be. I think personally I'll probably still prefer AT but it's good that epic will exist. Noserenda 1 Back to top Link to comment https://bolterandchainsword.com/topic/353010-in-service-of-the-death-lord-duskraiders-at-project/page/12/#findComment-5976510 Share on other sites More sharing options...
DuskRaider Posted July 29, 2023 Author Share Posted July 29, 2023 On 7/28/2023 at 8:28 AM, Mandragola said: Great to see you back. I hope LI turns out to be as good as we all want it to be. I think personally I'll probably still prefer AT but it's good that epic will exist. I’m with you on that. It seems as though Titans are going to be very uh… dumbed down in LI. The complexity of the rules is one of the biggest draws to Titanicus for me. You always have to be two steps ahead of yourself in the game. Managing your reactors, pushing at the right time… every move you make has consequences. Titans aren’t easy to take down so when you do manage to get an Engine Kill it’s a big deal. The game is incredibly immersive and while I’m really looking forward to commanding a massive army with the new Epic, I’m not sure if it will be the same experience as it is with Titanicus. I’ve finally convinced one of my friends to get into the game as well. Really, LI convinced him more than I’ve been able to over the past three or so years. He’s one of the ones that started 30K with me over a decade ago and has since sold his Iron Warriors, but the idea of recreating his army WITH Titans AND Knights and being able to fit it all in one case is just too tempting. Mandragola and Xin Ceithan 2 Back to top Link to comment https://bolterandchainsword.com/topic/353010-in-service-of-the-death-lord-duskraiders-at-project/page/12/#findComment-5976822 Share on other sites More sharing options...
DuskRaider Posted August 7, 2023 Author Share Posted August 7, 2023 Another update time… I finished the first Warbringer. Actually, I finished him about a week ago but haven’t had time to upload pictures. I’ll be honest, I really don’t like it. I had assembled painted the majority of this one almost 3 years ago and then it just sat in a box along with the other one and a Reaver. I’m not a fan of the color scheme on this one and I never actually did a dry fit with the armor panels so there’s a gap in the shin armor on the trailing left leg due to the pistons being in the way. One of the carapace guns is also at an elevated angle compared to the other and that’s also setting me off. It is what it is. I really don’t know how much if actually field Warbringers anyhow, they don’t fit my play style well overall. Anyhow, here it is. Corona Angoris, Crown of Anguish. I’ve also finally taken pictures of my terrain! Mind you all of this is now also over 3 years old and some of them are better than others in term of build quality and whatnot, but here’s where we are. I’m going to start priming all of it soon and finally finish these damn things. As you can see with the size comparison, some of these are quite large. The Governor’s Palace is a copy of one that GW had shown years ago, albeit no where near as nice as theirs. Still, it’s huge and makes a good centerpiece on the board and blocks line of sight to even the largest Titans (so far). The same could be said for the big step-pyramid looking building. There’s also a boatload of smaller scatter terrain including all of the containers, barrels, smaller tankers and such from the Industrial Set. I’ve also finished another Reaver and I just need to add decals. Originally it was going to be another Brawler, but I noticed a distinct lack of Melta in my Reaver collection so he’s packing some heat. Literally. Two more are on the docket after him and I’ve got my FW Titan weapons almost finished as far as painting goes. Until next time! Matcap86, Captain Idaho, Spazmolytic and 6 others 7 2 Back to top Link to comment https://bolterandchainsword.com/topic/353010-in-service-of-the-death-lord-duskraiders-at-project/page/12/#findComment-5979672 Share on other sites More sharing options...
Tar Aldarion Posted August 8, 2023 Share Posted August 8, 2023 (edited) I think you're quite strict there. Your warbringer looks fine as a model, whether it fits your gaming preferences or not. And the terrain is an outright impressive display of what the civitas sets can become. I'm very much looking forward to seeing it in some more colour, and I'm sure they make for an awesomely immersive gaming experience! Great stuff! Do you have space to leave it built up? It's pretty much a display of its own, and putting it back into boxes between games would almost be a bit of a shame. Edited August 8, 2023 by Tar Aldarion DuskRaider 1 Back to top Link to comment https://bolterandchainsword.com/topic/353010-in-service-of-the-death-lord-duskraiders-at-project/page/12/#findComment-5979780 Share on other sites More sharing options...
Sherrypie Posted August 8, 2023 Share Posted August 8, 2023 I do love how the statues combine with the buildings, the vibe is just right. LameBeard and DuskRaider 1 1 Back to top Link to comment https://bolterandchainsword.com/topic/353010-in-service-of-the-death-lord-duskraiders-at-project/page/12/#findComment-5979783 Share on other sites More sharing options...
DuskRaider Posted August 8, 2023 Author Share Posted August 8, 2023 7 hours ago, Tar Aldarion said: I think you're quite strict there. Your warbringer looks fine as a model, whether it fits your gaming preferences or not. And the terrain is an outright impressive display of what the civitas sets can become. I'm very much looking forward to seeing it in some more colour, and I'm sure they make for an awesomely immersive gaming experience! Great stuff! Do you have space to leave it built up? It's pretty much a display of its own, and putting it back into boxes between games would almost be a bit of a shame. Thanks for the comment! I don’t know, there’s just something about the Warbringer and it’s scheme that seems off to me but I don’t know what it is. Maybe too much red. I think the Warbringer overall looks cool, I’m just not happy with mine. Id love to display these at all times but unfortunately I just don’t have the space. My buddy just bought a house and will have a HUGE room dedicated to just gaming so I may be bringing all of the Titanicus stuff there but we’ll see. One of the biggest issues is that I built a lot of these buildings with a complete disregard for my Realm of Battle board and so many won’t fit at all, lol. I’ll probably prime them soon but they’re so far back on the to-do list right now that I’m not sure when I’ll get to them. Presently I have to do these two other Reavers so I can run my Corsair list and stand a chance since back when I built my other Reavers I equipped them more in a support role and less to carry an entire list themselves. So far I have a Melta / Chain Fist Reaver finished and I’m going to build at least one with Melta / Gatling. The last one I’m struggling with… I know I want one arm to be Melta but the second I’m unsure of. Part of me wants to make it another Melta / Gatling but part of me is thinking a Laser arm would work or be better. The biggest concern is obviously stripping shields to get the most out of the Melta / Fusion so Gatling seems like a good idea due to strength in number of dice, but Shieldbane is pretty nice as well and can definitely lay the hurt down when voids are gone. 7 hours ago, Sherrypie said: I do love how the statues combine with the buildings, the vibe is just right. I wish I could take credit for that one but GW did it first and I couldn’t help but copy them, lol. Theirs looks so awesome and I wish they would do more articles showing off the cool ways you can make use of the Civitas kit. Link to comment https://bolterandchainsword.com/topic/353010-in-service-of-the-death-lord-duskraiders-at-project/page/12/#findComment-5979851 Share on other sites More sharing options...
Achinadav Posted August 15, 2023 Share Posted August 15, 2023 I like the warbringer. The red shoulders will make it distinctive in play, especially from the angle you get when standing over the able. DuskRaider 1 Back to top Link to comment https://bolterandchainsword.com/topic/353010-in-service-of-the-death-lord-duskraiders-at-project/page/12/#findComment-5981356 Share on other sites More sharing options...
DuskRaider Posted August 16, 2023 Author Share Posted August 16, 2023 22 hours ago, Achinadav said: I like the warbringer. The red shoulders will make it distinctive in play, especially from the angle you get when standing over the able. Thanks! I think the biggest issue I have is that I didn’t alternate the red / black as I usually do and as a result it kinda just looks like a brick to me. I’ve finished two Reavers now along with a plethora of FW weapons for the Warlord / Reaver chassis, I just need to get some pictures. I’m starting on the last Reaver and then I’ll move on to finishing my horde of Knights… though I’m tempted to start the terrain. Link to comment https://bolterandchainsword.com/topic/353010-in-service-of-the-death-lord-duskraiders-at-project/page/12/#findComment-5981564 Share on other sites More sharing options...
DuskRaider Posted September 6, 2023 Author Share Posted September 6, 2023 Alright, time for a big update… I’m going to have to split this into two separate posts because there’s a metric ton of (poor quality) pictures. I really need to get my photo box out of the attic. First update will be regarding my House Makabius… I have finally finished my Cerastus Acheron and Castigators. Two full Banners of each, and the House grows exponentially. …and here we have the House as it currently stands. At this point I have 9 Questoris left to fill out each individual Banner and one Acastus to give me a total of three. I still have to create the bases for the Cerastus which… at this point will probably be finished by next August at this rate. The next post will be my completed Titans. Urauloth, The Yak, Captain Idaho and 3 others 3 3 Back to top Link to comment https://bolterandchainsword.com/topic/353010-in-service-of-the-death-lord-duskraiders-at-project/page/12/#findComment-5986422 Share on other sites More sharing options...
DuskRaider Posted September 6, 2023 Author Share Posted September 6, 2023 Alright… now that the Knights are out of the way, here come the big boys… I’ve finished my three Reavers. Finally. I’ve also finished a bunch of Reaver carapace weaponry as well as FW Warlord weapons. So let’s get into it… oh, I still haven’t come up with proper names for these so when I do I’ll add them in. Here we have all of the Reavers together. I now feel much more confident about my loadout variety, particularly when constructing a Corsair Maniple. Next up are the various Warlord options. I’ve had some of these for quite some time now, particularly the Gatling Cannons, Quake Cannons and Las Carapace weaponry. Charnel Glory in it’s preferred loadout: And one more for the hell of it because I am not photographing every possible loadout: There you have it. Now I have a lot of basing to do as well as the last of the Knights… and then their bases… what have I done to myself?? Ulfast, Noserenda, Captain Idaho and 4 others 6 1 Back to top Link to comment https://bolterandchainsword.com/topic/353010-in-service-of-the-death-lord-duskraiders-at-project/page/12/#findComment-5986427 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now