Rejects of Anvilus Posted March 8, 2021 Share Posted March 8, 2021 (edited) So as part of the current IF challenge being held in the IF forum i have finished the start of a small Siege of Terra force, and thought i should post it down here for you all. This army started out as a idea to do a kill-team based on one of the ones in Saturnine (which if you haven't read is great), and i settled on the one lead by Garro. While this plan was a starting point i have soon started adding more models which don't quite fit into a ZM ideology, so the currant plan is to do a 2500 point centurion list and then start adding vehicles, and as such i am currently halfway there with the first 1250 points: Breacher squad 1 Breacher squad 2 Terminators Dreadnought Apothecary Delegatus Champion And finally a group shot of them all: Next up in the painting table is a 15 man Phalanx warder Squad, a 5 man support squad, and Garro himself which will bring it up to 2000 points. After that i will do a 10 man autocannon heavy support squad, and 3 quad rapiers. Following that a Caestus assault ram (for the terminators) a rhino (for the support squad) a defense line (for the heavy support) and a Sicaran Arcus (for the lol's). This will have me at 3000 points if i don't use Garro, and my plan then is to add some White Scars and some Blood Angel allies. Hope you like them and any comments and criticism is gratefully received. For Dorn and the Emperor! Edited March 8, 2021 by spinitron Brother Tyler, Gorgoff, Ryltar Thamior and 22 others 25 Back to top Link to comment https://bolterandchainsword.com/topic/369405-imperial-fists-ready-to-defend-the-walls/ Share on other sites More sharing options...
battle captain corpus Posted March 8, 2021 Share Posted March 8, 2021 Great job! The blood is spot on as well, nice and minimal just to enhance the minis not detract from them. Lovely! BCC Rejects of Anvilus 1 Back to top Link to comment https://bolterandchainsword.com/topic/369405-imperial-fists-ready-to-defend-the-walls/#findComment-5675707 Share on other sites More sharing options...
Marshal Rohr Posted March 8, 2021 Share Posted March 8, 2021 Really, really well done! Rejects of Anvilus 1 Back to top Link to comment https://bolterandchainsword.com/topic/369405-imperial-fists-ready-to-defend-the-walls/#findComment-5675735 Share on other sites More sharing options...
Gorgoff Posted March 8, 2021 Share Posted March 8, 2021 Awesome work. Rejects of Anvilus 1 Back to top Link to comment https://bolterandchainsword.com/topic/369405-imperial-fists-ready-to-defend-the-walls/#findComment-5675773 Share on other sites More sharing options...
Pearson73 Posted March 8, 2021 Share Posted March 8, 2021 Really solid work on these chaps, I particularly like all the gore and grime. The Apothecary really looks the business. Rejects of Anvilus 1 Back to top Link to comment https://bolterandchainsword.com/topic/369405-imperial-fists-ready-to-defend-the-walls/#findComment-5675802 Share on other sites More sharing options...
Jareddm Posted March 8, 2021 Share Posted March 8, 2021 Studded terminator pauldrons! Link to comment https://bolterandchainsword.com/topic/369405-imperial-fists-ready-to-defend-the-walls/#findComment-5675857 Share on other sites More sharing options...
Gorgoff Posted March 8, 2021 Share Posted March 8, 2021 I'd give it another like, if I could. Those terminators look ace. The studded shoulderpads, the shields- great work. Seeing your painted dreadnought makes me excited to paint mine. Rejects of Anvilus 1 Back to top Link to comment https://bolterandchainsword.com/topic/369405-imperial-fists-ready-to-defend-the-walls/#findComment-5675921 Share on other sites More sharing options...
Bung Posted March 8, 2021 Share Posted March 8, 2021 Studded terminator pauldrons! Have look at Pop goes the Monkey for such bits. At least the shields are from that shop. Link to comment https://bolterandchainsword.com/topic/369405-imperial-fists-ready-to-defend-the-walls/#findComment-5675947 Share on other sites More sharing options...
Hfran Morkai Posted March 8, 2021 Share Posted March 8, 2021 Glorious! Love the Dreadnought especially! Such a good model. Rejects of Anvilus 1 Back to top Link to comment https://bolterandchainsword.com/topic/369405-imperial-fists-ready-to-defend-the-walls/#findComment-5675951 Share on other sites More sharing options...
DigestPantheon Posted March 8, 2021 Share Posted March 8, 2021 I really like the blood and gore on their shields, it looks great. Rejects of Anvilus 1 Back to top Link to comment https://bolterandchainsword.com/topic/369405-imperial-fists-ready-to-defend-the-walls/#findComment-5675966 Share on other sites More sharing options...
Rejects of Anvilus Posted March 8, 2021 Author Share Posted March 8, 2021 Thanks everybody! The studded shoulder pads are from a small company called Master Crafted Miniatures who can be found at mastercrafted.co.uk give them a look as they have some other equally excellent bits? Gorgoff 1 Back to top Link to comment https://bolterandchainsword.com/topic/369405-imperial-fists-ready-to-defend-the-walls/#findComment-5676027 Share on other sites More sharing options...
Mogsam Posted March 8, 2021 Share Posted March 8, 2021 These are nice! Love the flamestorm choice! I noticed master crafted last week and should have some decals coming this week! Link to comment https://bolterandchainsword.com/topic/369405-imperial-fists-ready-to-defend-the-walls/#findComment-5676058 Share on other sites More sharing options...
Prim Posted March 8, 2021 Share Posted March 8, 2021 Those Fists look fantastic. Really nice work on all of them, from the bases to the weathering. Link to comment https://bolterandchainsword.com/topic/369405-imperial-fists-ready-to-defend-the-walls/#findComment-5676109 Share on other sites More sharing options...
Marshal Vespasian Posted March 9, 2021 Share Posted March 9, 2021 (edited) Saw them on fb, great stuff! Proper gritty. I like the amount of blacks you have added to break up the yellows Edited March 9, 2021 by Marshal Vespasian Link to comment https://bolterandchainsword.com/topic/369405-imperial-fists-ready-to-defend-the-walls/#findComment-5676233 Share on other sites More sharing options...
LameBeard Posted March 10, 2021 Share Posted March 10, 2021 Seeing your painted dreadnought makes me excited to paint mine. I’m so jealous of both of you having that dreadnought model. And jealous of the painting skills on display here too. Link to comment https://bolterandchainsword.com/topic/369405-imperial-fists-ready-to-defend-the-walls/#findComment-5677096 Share on other sites More sharing options...
infyrana Posted March 11, 2021 Share Posted March 11, 2021 Wonderful stuff ! MkIII, boarding shields, dreadnought, studded shoulder pads and grit n grime, all the hallmarks I can enjoy despite the colour hehe, shame I can't double like :) Mind if I ask where the shields and arms are sourced from please? Mastercrafted is a great source for spiked shoulder pads! Link to comment https://bolterandchainsword.com/topic/369405-imperial-fists-ready-to-defend-the-walls/#findComment-5677134 Share on other sites More sharing options...
Rejects of Anvilus Posted March 11, 2021 Author Share Posted March 11, 2021 Seeing your painted dreadnought makes me excited to paint mine. I’m so jealous of both of you having that dreadnought model. And jealous of the painting skills on display here too. Thanks dude, this was originally part of my old Iron Hands army but when I sold it I kept a few bits and this was one of them, along with two standard MKIV ones which I will also repaint at some point. Such a shame they stopped doing these as they were lovely models especially all the legion specific ones. Wonderful stuff ! MkIII, boarding shields, dreadnought, studded shoulder pads and grit n grime, all the hallmarks I can enjoy despite the colour hehe, shame I can't double like Mind if I ask where the shields and arms are sourced from please? Mastercrafted is a great source for spiked shoulder pads! Thank you so much! The shields are from Pop Goes The Monkey, they’ve got a couple of different versions and sizes. The arms are standard GW plastic ones but altered quite a bit. The left arms are just the plastic storm shield arms just trimmed to fit the new shields. With the right arms I had to do a few conversions which included swapping the thunder hammer head for the head from the limited edition FW praetor, taking a right handed lightning claw and trimming all the claw bits off before adding a chainfist cut from a left handed powerfist, and with the axes crafting the heads out of plastic card and attaching them to trimmed down thunder hammer shafts. Quite a lot of work which isn’t really noticeable but I’m happy I did it. LameBeard and infyrana 2 Back to top Link to comment https://bolterandchainsword.com/topic/369405-imperial-fists-ready-to-defend-the-walls/#findComment-5677180 Share on other sites More sharing options...
Brother Pheidias Posted March 13, 2021 Share Posted March 13, 2021 These are fantastic, up there with the best of Dorns' sons! Rejects of Anvilus 1 Back to top Link to comment https://bolterandchainsword.com/topic/369405-imperial-fists-ready-to-defend-the-walls/#findComment-5678195 Share on other sites More sharing options...
Rejects of Anvilus Posted March 15, 2021 Author Share Posted March 15, 2021 So continuing on with this force i have base-coated the next 20 models for this army. As i already have two squads of Breachers i can now add a 15 man unity of Phalanx Warders to my troop slots, as i will be playing using Stone Gauntlet. Alongside this i am adding a five man support squad who will be armed with either meltaguns or plasma depending on what i am planning on doing with them. I have also made a start on Garro but don't have a photo of him. Once these are all done i will have a 2000 point force for Zone Mortalis, or Centurion rules. At the same time (because i like/hate painting in batches) i have started on two slightly different items which are also IF based. First we have a larger scale bust: and then a 1:10,000 scale Battle Fleet Gothic Sword class frigate: which for some reason looks a slightly different colour but is in fact the same as the others! Anyway as always comments and criticism is welcome. Cheers! LameBeard, Prim, Denton25 and 1 other 4 Back to top Link to comment https://bolterandchainsword.com/topic/369405-imperial-fists-ready-to-defend-the-walls/#findComment-5678729 Share on other sites More sharing options...
Marshal Vespasian Posted March 18, 2021 Share Posted March 18, 2021 (edited) Great stuff! Feels like there is at least three IF projects put there that make me rethink my colour and stylistic choices. Where is the bust from? I saw these around on facebook I think Edited March 18, 2021 by Marshal Vespasian Link to comment https://bolterandchainsword.com/topic/369405-imperial-fists-ready-to-defend-the-walls/#findComment-5680294 Share on other sites More sharing options...
Rejects of Anvilus Posted March 19, 2021 Author Share Posted March 19, 2021 Great stuff! Feels like there is at least three IF projects put there that make me rethink my colour and stylistic choices. Where is the bust from? I saw these around on facebook I think I am constantly re-evaluating my colour choice especially as i have made it so complicated, and the are a lot of easer better looking ones out there. This is the way! As for the bust i picked it up of a guy over on Facebook as you guessed, i would say who but as GW are quite C&D at the moment i don't want to link them up in a public forum (the guy who made the BFG ship had to stop this week sadly). Sorry! Link to comment https://bolterandchainsword.com/topic/369405-imperial-fists-ready-to-defend-the-walls/#findComment-5680484 Share on other sites More sharing options...
Marshal Vespasian Posted March 19, 2021 Share Posted March 19, 2021 Great stuff! Feels like there is at least three IF projects put there that make me rethink my colour and stylistic choices. Where is the bust from? I saw these around on facebook I think I am constantly re-evaluating my colour choice especially as i have made it so complicated, and the are a lot of easer better looking ones out there. This is the way! As for the bust i picked it up of a guy over on Facebook as you guessed, i would say who but as GW are quite C&D at the moment i don't want to link them up in a public forum (the guy who made the BFG ship had to stop this week sadly). Sorry! Jeah I chose the vince venturella recipe and it takes me a AGES to get anything yellow. Theres a bunch if cool recipes out there that go WAY faster. Then again I feel like I learn a lot about airbrushing this and like the look. So there is that . Boooo! At the C&Ds Rejects of Anvilus 1 Back to top Link to comment https://bolterandchainsword.com/topic/369405-imperial-fists-ready-to-defend-the-walls/#findComment-5680572 Share on other sites More sharing options...
Rejects of Anvilus Posted April 24, 2022 Author Share Posted April 24, 2022 (edited) Copying my post from the IF forum so that the pictures are all here as well. Scrapping in at the last minute my vow is done! As well as the original models pledged (Caestus Assault Ram, 5 Tactical Marines, 10 Heavy Support Marines, and a Aegis Defence Line) I picked up Fafnir Rann a little while again, so I have added him in as well. Really happy with these and it brings my army to 4K in total (at some point I will get pictures of it all together) and this means it is done. Just in time for a new edition to invalidate half of it… Anyway enough of the chat, here are the pictures which is all anybody really wants to see! Fafnir Rann and the Tacticals Heavy Support and the Aegis Caestus Assault Ram (such a beautiful model, really hope they rerelease it) And everything all together! Edited April 24, 2022 by spinitron Chaeron, LameBeard, Dr_Ruminahui and 4 others 7 Back to top Link to comment https://bolterandchainsword.com/topic/369405-imperial-fists-ready-to-defend-the-walls/#findComment-5818894 Share on other sites More sharing options...
Gorgoff Posted April 24, 2022 Share Posted April 24, 2022 Outstanding work and the visual proof that nice pauntjob does wonders. That and using HH poweraxes on Rann and not those comic ones. Link to comment https://bolterandchainsword.com/topic/369405-imperial-fists-ready-to-defend-the-walls/#findComment-5818913 Share on other sites More sharing options...
Rejects of Anvilus Posted April 24, 2022 Author Share Posted April 24, 2022 Outstanding work and the visual proof that nice pauntjob does wonders. That and using HH poweraxes on Rann and not those comic ones. THank’s! Wasn’t happy with the axes or some of the bling on him so removed it. Also I suck at painting skin so a helmet was the obvious choice Gorgoff 1 Back to top Link to comment https://bolterandchainsword.com/topic/369405-imperial-fists-ready-to-defend-the-walls/#findComment-5818917 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now