Terminatorinhell Posted July 10 Author Share Posted July 10 Long ago I screwed up a dreadnought model, including breaking apart the torso. Now I'm trying to remake it and make the kitbash I envisioned 12+ years ago with the skills I have now. Excuse the crap lighting, I'm not at my usual place. Dr_Ruminahui, Firedrake Cordova, phandaal and 1 other 4 Back to top Link to comment https://bolterandchainsword.com/topic/379949-terminatorinhells-wips/page/28/#findComment-6120565 Share on other sites More sharing options...
Brother Christopher Posted July 10 Share Posted July 10 The reclamation and restoration process definitely is a success. It was a very ambitious project for sure. I'm not sure about the Close Combat Weapon, though. It's a bit too small/stubby for such tall walker, I think. space wolf and Firedrake Cordova 2 Back to top Link to comment https://bolterandchainsword.com/topic/379949-terminatorinhells-wips/page/28/#findComment-6120655 Share on other sites More sharing options...
space wolf Posted July 10 Share Posted July 10 (edited) I agree with Bro C. You should extend the arm like you did the legs...and bulk out the gun arm, perhaps by lowering it, similar to how the redemptor is set up, will make it look more symmetrical. Great progress so far! Edited July 10 by space wolf Firedrake Cordova 1 Back to top Link to comment https://bolterandchainsword.com/topic/379949-terminatorinhells-wips/page/28/#findComment-6120663 Share on other sites More sharing options...
Terminatorinhell Posted July 10 Author Share Posted July 10 Yeah the arms were just there to see how they looked, they're tacked on. I'll see what I can figure out later on. Link to comment https://bolterandchainsword.com/topic/379949-terminatorinhells-wips/page/28/#findComment-6120718 Share on other sites More sharing options...
Terminatorinhell Posted July 11 Author Share Posted July 11 After a bit of scavenging my Gunpla collection I made him a different arm, it actually still has some elbow articulation and I can theoretically swap arms at the elbow. It's a little chunkier and I think fits the silhouette a bit better phandaal, Tallarn Commander, Firedrake Cordova and 1 other 4 Back to top Link to comment https://bolterandchainsword.com/topic/379949-terminatorinhells-wips/page/28/#findComment-6121006 Share on other sites More sharing options...
Terminatorinhell Posted July 23 Author Share Posted July 23 Here's a bit more work on him, some cables, more details and gap filling, peg for his arm to attach. Rusted Boltgun, Dr_Ruminahui, phandaal and 1 other 4 Back to top Link to comment https://bolterandchainsword.com/topic/379949-terminatorinhells-wips/page/28/#findComment-6123782 Share on other sites More sharing options...
Terminatorinhell Posted July 26 Author Share Posted July 26 I made him a power claw by oyumaru casting a khorne sword scabbard I smoothed out. I think it looks OK? Kind of a pain to do Also been trying to rehabilitate some khorne FW terminators. Their horns snapped odd so I had to make replacement ones. Rusted Boltgun, Firedrake Cordova, Operative23 and 3 others 5 1 Back to top Link to comment https://bolterandchainsword.com/topic/379949-terminatorinhells-wips/page/28/#findComment-6124337 Share on other sites More sharing options...
Firedrake Cordova Posted July 26 Share Posted July 26 Dreadnought CCW looks good to me Link to comment https://bolterandchainsword.com/topic/379949-terminatorinhells-wips/page/28/#findComment-6124377 Share on other sites More sharing options...
Terminatorinhell Posted July 27 Author Share Posted July 27 Did a test scheme in one of the terminators with stippling. I was painting it in a low light setting St a friend's place so it came out a little rough. But it's Chaos so I guess it's fiiiine. Dr_Ruminahui, Rusted Boltgun and Firedrake Cordova 3 Back to top Link to comment https://bolterandchainsword.com/topic/379949-terminatorinhells-wips/page/28/#findComment-6124648 Share on other sites More sharing options...
Terminatorinhell Posted August 1 Author Share Posted August 1 I got side tracked and made a nurgle mini to test a paint scheme. I layered some bone colors for the armor, silver for the metallic, skin tones then a sepia wash and streaking grime. I think it came out pretty neat but I am not sure if I need to do more to it? To bring out more colors, to add some definition to parts? Firedrake Cordova, Rusted Boltgun, Dr_Ruminahui and 1 other 3 1 Back to top Link to comment https://bolterandchainsword.com/topic/379949-terminatorinhells-wips/page/28/#findComment-6125552 Share on other sites More sharing options...
Firedrake Cordova Posted August 1 Share Posted August 1 Looks fine to me - very much like something out of a John Blanche illustration Terminatorinhell 1 Back to top Link to comment https://bolterandchainsword.com/topic/379949-terminatorinhells-wips/page/28/#findComment-6125562 Share on other sites More sharing options...
Terminatorinhell Posted August 7 Author Share Posted August 7 Painted up some terminators I rescued, they were a kitbash of forgeworld WE terminator parts and old plastic terminators. Almost all their horns broke off so I needed to remold them. Firedrake Cordova, Tallarn Commander, Grotsmasha and 2 others 2 3 Back to top Link to comment https://bolterandchainsword.com/topic/379949-terminatorinhells-wips/page/28/#findComment-6126771 Share on other sites More sharing options...
Terminatorinhell Posted August 13 Author Share Posted August 13 Now for something out of left field... Or whatever that phrase is. Almost 10ish years ago I started a project called the Baneraider. I had really butchered it and gave up halfway through. Now I dug it out of my boxes and have been working on it the last few nights. I have basically redone the back plate, top plate, added some "stubber" and am redesigning parts. It's been kind of rough but I hope to eventually make something presentable. I also need to figure out how to mount the turret (I think it was from blood and skulls industries?). I also might need to see about adding rivets to some areas. Dr_Ruminahui and Tallarn Commander 1 1 Back to top Link to comment https://bolterandchainsword.com/topic/379949-terminatorinhells-wips/page/28/#findComment-6127659 Share on other sites More sharing options...
Terminatorinhell Posted August 14 Author Share Posted August 14 And some more... Riveting work And a shot of the overall look so far. The big cannon is a place holder/alternate. I'm going to see if I can make the main gun swappable. Rusted Boltgun, phandaal, Dr_Ruminahui and 1 other 3 1 Back to top Link to comment https://bolterandchainsword.com/topic/379949-terminatorinhells-wips/page/28/#findComment-6127795 Share on other sites More sharing options...
Terminatorinhell Posted August 15 Author Share Posted August 15 Not much to say here, just built a mount for the scratch built cannon. I have two other sets of guns coming for it too Tallarn Commander and Rusted Boltgun 2 Back to top Link to comment https://bolterandchainsword.com/topic/379949-terminatorinhells-wips/page/28/#findComment-6128042 Share on other sites More sharing options...
Terminatorinhell Posted August 21 Author Share Posted August 21 Because I have hobby adhd I decided to paint one of my titans from a decade ago. I got a new airbrush and decided it would be great to try it with that. It was going great.. Until it wasn't. Long story short I flipped a **** and had to strip the armor. But at least it came off easily enough and the parts were easily freed from the frame. I did also make a cool base for it using the beat up remnants of my first ever kit a defiler. I stripped and reprimed the armor and am gonna try to repaint it when I get back from a trip. Probably will try the white on a spoon or something. phandaal and Tallarn Commander 2 Back to top Link to comment https://bolterandchainsword.com/topic/379949-terminatorinhells-wips/page/28/#findComment-6128928 Share on other sites More sharing options...
Terminatorinhell Posted August 21 Author Share Posted August 21 I also did up the base, the interesting thing about it is the defiler ruins are from my first ever 40k kit. It was too trashed to do anything else with I guess. The armor stripped pretty well with some LA totally awesome thankfully. I'm going to let the new black primer cure a bit. I'm a little worried about trying white again via airbrush. I'm using Vallejo airbrush thinner and flow improver and pro acryl white. phandaal 1 Back to top Link to comment https://bolterandchainsword.com/topic/379949-terminatorinhells-wips/page/28/#findComment-6129016 Share on other sites More sharing options...
Terminatorinhell Posted 11 hours ago Author Share Posted 11 hours ago Back from my trip, I did start repainting the titan and it came out pretty decently so far. I just need to paint the cannon arm and shoulder shield. I like the clean look so I'm not sure if I'm gonna add decals. I lost the original sheet but have one from an unopened titan box but idk if I wanna use those. madlibrarian 1 Back to top Link to comment https://bolterandchainsword.com/topic/379949-terminatorinhells-wips/page/28/#findComment-6130102 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now