Jump to content
  • entries
    105
  • comments
    39
  • views
    10407

About this blog

A blog showing and showcasing the various models of my collection and pile of shame while I progressively paint/repaint/update them. 

 

Inc. WIP, completed projects and, I hope, the models in action back on table tops (after a gaming break other the past 3 editions).

Entries in this blog

Freeblade

Allied Freeblade - Part 5

Hi Folks,   With torso done and legs done, it was only a matter of (little) time for these to part to be united in the holy forges of Mars.     The big boy is now standing, only missing some finiching touches. While heraldry guide for Freeblades (or Dreadblades) leave a lot of room to the pilot to customize its steed, some stuffs can be seen as usual features: - No or low amout Imperium marks - the 2 headed eagle is seldom in general - No household m
Bouargh

Bouargh in Freeblade

0
Freeblade

Allied Freeblade - Part 4

Hi Folks,   The W.E. (stands for Week-End, not World Eaters), has been calm enough to complete the lower part (a.k.a. legs) of the Styrix. After some tape masking and one or two small corretions, the armoured legs of the Styrix were maked-up in the same combination of Eshin Grey and Wraithbone as the paultrons. Plus some added red stripes, as on the illustration taken as a guiding model. Main difference is that panel colours are inverted in order to fit to the Heraldry guide
Bouargh

Bouargh in Freeblade

0
Freeblade

Allied Freeblade - Part 3

Hi Folks,   Asmall update as a third installment of this WIP series of posts. The upper part of the Styrix is now close to completion. Paultrons have been painted and I only have left their mounting into place, or rather their glueing as they can be fairly easily be mounted "dry". The wepons, carapace... are alredy assemblied and fixed.   I planned getting this torso unglued to the legs, in order to get transport easier, but it will not happen: the mini is too heavy
Bouargh

Bouargh in Freeblade

0
Freeblade

Allied Freeblade - Part 2

Hi Folks,   As a second installment of this WIP journey, let´s talk paint scheme a little bit. I planned to use this Freeblade mainly as a boost for my Skitarii. From here comes the selection of the model, based on its look and not on its rules. I wanted something AdMechiest to be integrated into the overall vibe of the force. The Styrix had a better touch to my taste, even if I find its head a little bit disapointing - the Maegara one is better.   While thinking AdMech
Bouargh

Bouargh in Freeblade

0
Freeblade

Allied Freeblade - Part 1

Stomp Stomp... Styrix incoming...   This big guy was in my plans for a while, and some months passed since I listed its aquisition into the TITH thread (Today´s in the Hobby - See Amicus Aede sub-Forum).   It was high time to strat working on this machine. I initially thought about enlisting it as a Plodding along, but I rather keep this pledge for some kitbashed vehicles waiting to be finished and painted for years (a quarter or 2 before I suscribed to this forum). And havin
Bouargh

Bouargh in Freeblade

0
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept