++ AUGUSTUS b'RAASS ++ pre-heresy BRASS SCORPION p.247

[SkimaskMohawk]

Thats a sexy Khornetemptor Augie

[Atia]

Nice conversion with the Contemptor, especially the use of the chains.

Quoted for truth. Really awesome Auggi :)

[Soldier of Dorn]

:wub: :wub: :wub:

 

I'll be borrowing most of the ideas on that Contemptor sometime, if you don't mind Auggie. It looks awesome.

[hushrong]

 

 

 

 

 

 

Lemme know what you think, and perhaps if you have suggestions, feel free to share them. I'm thinking of putting a banner on him - perhaps the staked commisar from the Lord Zhufor FW miniature...

 

 

@ hishrong: Thanks, bro! Counting is dificult, but Khorne only needs to count to eight. I'm not sure what you mean about the BT's base being off to the side?

I'm off worse. Slaanesh only goes up to six...if they don't get distracted.

 

And I went back in your log and realized how you put him on your base. I was just looking at the recent picture cross eyed.

 

As for the recent models the Hounds look fantastic. If I ever use any I am copying you. Also, there is something I love about contemptors and one decked out and ready to rock for Khorne  is a magnificent sight. I love the way you put that one together. As for the banner, I don't think it is a terrible idea but I don't think he really needs it. I do think it would be cool to see Khorne's symbol painted on him with something like tamiya clear red to represent blood.

 

also looking forward to the sicaran and hell blade.

[KrautScientist]

I love what you've done with the Contemptor, as you have managed to give it a wonderful 40k Khornate look without sacrificing any of the cool World Eaters detail or overcluttering the model. I will say that the 30k multimelta design is possibly my least favourite weapons option, however, and it seems to work against the overall barbaric and gladiatorial look of the model to some extent. Are you maybe considering a) using a different weapon (probably not, eh? or b ) something to make the weapon fit the overall aesthetic a bit better (daemon head muzzles, an underslung chainblade or some more of that jeweller's chain) or c) going for exchangeable weapons via magnets? This is really my only criticism about the model -- apart from that, I cannot wait to see it painted!

Edited July 1, 2016 by KrautScientist

[Pyroclast91]

I love your Khorntemptor that's a fantastically executed conversion I like what you've managed to do with just a few bits some re posing and some chain sometimes I get lost in the "make everything custom" mindset and forget that whole less is more thing keep up the awesome work

[sockwithaticket]

Remind me who that Contemptor serves?

Looks mean.

[Knight of the Raven]

That might just be my favorite World Eater contemptor yet. About the banner, I feel it'll clash with the dreadnought's 'bunny ears.'

 

@ Knight of the Raven: THANK YOU! FInally someone who acknowledges the handicraft and skills that goes into airbrushing.

You're welcome, and I'm quite surprised. You're still using your hands as far as I know, they just happen to hold a paintgun and a model instead of a paintbrush and a model.

[gaurdian31]

I think the contemptor looks great as is, the banner would make it feel cluttered in my opinion.

[Flint13]

Looking pretty great man!

 

I love all the Khorney details on that contemptor and the super spoopy flesh hounds. 

[Dantay VI]

 

 

The contemptor is looking boss.

 

Thank you for the measurements. So the Typhon shield is 60mm tall and 55mm wide?

 

How about the cut out area for the cannon?

 

I am considering a design like this for the shield:

 

[Augustus b'Raass]

Thanks for the replies, gals and guys! 

 

The Contemptor is finished. I was already half-way painting it, when KrautScientist made his comment about the multimelta. I agree that it's one of the least appealing looking weapons choices of the contemptor dreadnought (although it looks better irl than in the FW pics) - and that its bland looks clashed somewhat with the distinct Khornate vide of the rest of the dread. So I started rummaging through all my bits boxes and finally settled for a FW chainsword - to Khornivy the shooty bit of the dread. It's totally inefficient, of course, but woe to he who approaches this dude from the left.

 

I've also begun to use edge highlighting on the Dread, which I never did before as I found that dark and light colour shading did the trick sufficiently. I also started edged highlighting the gold, which i never did before. But now that I´ve started doing both, I really, really enjoy it. 

 

Anyway, here he is:

 

Ancient Ka'Ruat 

Storm Assault Contemptor 

59th Echelon World Eaters

'Prostration's Cull'

 

http://i35.photobucket.com/albums/d185/mkruijff/World%20Eaters/temporary_zpskfcruqmw.jpg

 

http://i35.photobucket.com/albums/d185/mkruijff/World%20Eaters/temporary_zpsp2uzgmfw.jpg

 

http://i35.photobucket.com/albums/d185/mkruijff/World%20Eaters/temporary_zpsxxmkrl1j.jpg

 

http://i35.photobucket.com/albums/d185/mkruijff/World%20Eaters/temporary_zpszx2gonjl.jpg

 

http://i35.photobucket.com/albums/d185/mkruijff/World%20Eaters/temporary_zpsoa5cge4a.jpg

 

I hope you like him! 

 

He's my fifth contemptor, if you don't count the Imperial Fist Deredeo I did a while back. I thought it'd be nice to do a family shot. Take a look! 

 

From left to right: 

 

Nurgle Dreadnought Hargolan Adun, the salvaged Cilice Macelarius, 47th Company's Contemptor-Captain Tol Zaeqal, Khornate Storm Assault Contemptor Ka'Ruat, and finally my as-of-yet unnamed Devastator Contemptor (naming suggestions welcome).

 

http://i35.photobucket.com/albums/d185/mkruijff/World%20Eaters/temporary_zpssgbbhb2v.jpg

 

Thanks for looking! Feedback, comments, and C&C always welcome.

 

Replies!

 

@ Pearson73: Cheersw, buddy. I bought that chain two years ago from a guy in the Isle of Mann. I regret nothing.

 

@ SkimaskMohawk: Haha Khornetemptor. That's cute.

 

@ Atia: Thanks, glad you like him. Yoyr work on the Scorpion inspired me to start highlighting my gold trim. Great decision, so thanks!

 

@ The psycho: Steal/Borrow away, buddy!

 

@ hushrong: Good to hear it was a false alarm on the BT base. Steal away about the hounds. And the Sicaran is next!

 

@ KrautScientist: Thanks for another insightful reply, buddy. Your words on the multi melta and its lack of close combat capabilities made me add the underslung chain weapon. It's also magnetized and can be exchanged for any of the other weapons in the contemptor club, so that might happen. I do think the multimelta is the best weapon option for a contemptor dropped in a dreadclaw, so it probably won't happen often. I hope you've already noticed how I thanked you for the idea.

 

@ Pyroclast91: Yeah I know what you mean. My early Night lords vehicles also suffered from the cluttering of spikes, ornamentation, skulls etc. Less is indeed more.

 

@ sockwithaticket: Erm, Khorne? isn't it obvious?

 

@ Knight of the Raven: I know right? It's more that KrautScientist and Forté teased me in the past, saying I should start with painting for reals. :'(

 

@ guardian31: I agree, and I've left it off for that very reason. Thanks for confirming my suspisions!

 

@ Flint13: Considering Aasfresser's recent posts in the Realm fo Chaos, I find your confusion of faith in Khorne with Nurgle disturbing. 

 

@ dantay_xv: The Typhon shield's cut-out is 25 mm wide, and 50mm deep, while the buckle starts 32mm from the top. The buckle's angle is 135 degrees - so 24 degrees with the ground).

Edited July 2, 2016 by Augustus b'Raass

[KrautScientist]

Whoa, that Contemptor is looking fantastic -- possibly my favourite from among your ETL V models so far, along with the Kytan!

 

So glad to see you picked up on my idea with the underslung chainblade! I think the chainsword you have on there now works really well, giving the impression that the Contemptor will use the entire melta arm as a huge chainsaw when in a pinch! Also, "Ka'Ruat"? Now that's pretty grand of you, buddy! What a great way of being immortalised (doubly so, given it's a Dread we are talking about) in your army! Thanks so much for that!

 

I have two very small suggeszions for the model: One would be to make his optical sensor a bit brighter to create a bigger point of focus there, but that is certainly a matter of personal taste. The other would be that I think his empty right kneepad really screams for a white (or golden) numeral "XII".

 

EDIT: I almost forgot: That Contemptor group shout is quite incredible!

Edited July 2, 2016 by KrautScientist

[Flint13]

Dude, I entirely missed that chainblade under the melta!

 

Where'd you get that from?

[infyrana]

Contemptortastic :)  There's more work done in that group shot of contemptors than I've managed to pump out in a long time!

 

What was the idea behind the nurgle variant?  I've missed a few posts ^^

[MikhalLeNoir]

Wow those contemptors...woooooooooooahhhhh

[Kizzdougs]

A+ bro!! The work on the Contemptor is outstanding! 

 

Great to see a team pic of all of the Dreadbros together :tu:

[Doctor Perils]

Squeeee :P

[Knight of the Raven]

I can't say I like post-heresy World Eaters or their color scheme, but this contemptor... this comtemptor is going right into my inspiration folder. It has truly secured its place as my favorite khornate model. I never would have thought I'd like the khornate color scheme better than the pre-heresy one on the World Eater contemptor either!

 

Where'd you get that from?

I believe it's a chainsword from the crusade/iron pattern assault marines from Forge World.

Edited July 2, 2016 by Knight of the Raven

[Soldier of Dorn]

It's interesting that you and Kraut both find the multi-melta unappealing aesthetically speaking, as it's probably my favorite looking Contemptor gun after the Kheres. Different strokes for different folks, I guess.

 

He looks really good, BTW. I think the World Eater dread is my favorite of all the ones in FW's range (in no small part due to the MkII-esque head it shares with the Death Guard one) and the little things you've added to it only accentuate the beauty of the sculpt. Paint job turned out beautifully as well.

[Ada]

Five of the best contemptor models I've seen, great work man!

[rednekkboss]

You are a painting machine. I have tons of minis that need painting, I'll send you a package.  Seriously, It looks great. Love the group shot too.

[Mechanist]

That group shot is looking epic. Loving the contemptor and the flesh hounds are looking promising. 

[Midnightmare]

That contemptor - oh wowz!! I love what you have done with him, looks brutal

[Augustus b'Raass]

Thanks, gang, for all the replies!

 

Today saw me finish half of my unit of 10 Flesh Hounds. Unfrotunately I only had 5 oval 60mm bases on which to put them, so I have to wait until those arrive through mail order. For now, I really enjoyed painting these five dire wolves/flesh hounds. They're excellent models, allowing for a myriad of techniques. I love how they fit into my KDK colour scheme. :tu:

 

Pictures:

 

http://i35.photobucket.com/albums/d185/mkruijff/World%20Eaters/temporary_zpsoz1gzttc.jpg

 

http://i35.photobucket.com/albums/d185/mkruijff/World%20Eaters/temporary_zpsbghk7zbr.jpg

 

http://i35.photobucket.com/albums/d185/mkruijff/World%20Eaters/temporary_zpsywqwu7wz.jpg

 

I hope you like them as I do! Thanks for visiting and commenting: feedback, C&C welcome, as always. :)

 

Replies!

 

@ KrautScientist: Another great suggestion: the transfers are on the Contemptor. I just have to take some pictures of them, but have just stashed away the photo botth. Tomorrow, maybe. :tu: The name is well-deserved. I owe you a debt of gratitude for your constant dedication to my improvement en for the constant inspiration i garner from your Eternal Hunt thread. 

 

@ Flint13: Thanks, flint! The chainblade is a chainsword from the MkV assault marines from FW.

 

@ infyrana: The idea behind the Nurgle variant? What do you mean? How I came up with the inspiration to build him? I guess I always wanted to make a contemptor with a distended nurgle belly. I posted some pretty crappy pictures of him over in my showcase thread. Perhaps I should revisit him and make some cool glamour shots?

 

@ MikhalLeNoir: Haha thanks, buddy!

 

@ kizzdougs: Thanks, kizz! High praise form you again. Might I suggest you replace the glaive on your recently acquired praetor with a hammer, and make him a warmisth?

 

@ Lord Thørn: Hahaha :)

 

@ Knight of the Ravm: Welll thanks! I'm glad you like the khornate colour scheme of the XII. :) 

 

@ The Psycho: Well, now that I've finsihed it, and can see it from more angles than the pretty limited FW stuff, I am slowly being charmed by the heat ray. ;)

 

@ Ada: Thanks you, Ada!
 

@ rednekboss: hahaha well, suit yourself. I'd hate to take models away from you, as you yourself are such an accomplished painter - and especially converter!

 

@ mechanist: How'd you like the flesh hounds finished?

 

@ Midnight Runner: Cheer's buddy! Thanks for your continued support!