Damon Nightman Posted September 23, 2016 Author Share Posted September 23, 2016 Thank you! lol i hate those anteater looking ones too. I didn't know that was crappy MKIV before GW could do it right like B@C. I regret putting that helm on a PF guy, but i assembled this batch of DC back when they first came out and didn't touch them again until recently... I also used ridiculous amounts of glue for no reason back then, so getting it off would be tricky... younger me Charlo i actually was going to ask your advice on something, so i'll do it here now. When you do black for vehicles, do you just spray black, high light and thats it? or do you spray black, apply a layer or two of black paint, and then highlight? I tried doing the latter on my pred, and immediately after putting one layer of black it looked incredibly uneven and the brush strokes were very noticeable when in the light. Idk if i just didn't thin my black paint down enough or what. I don't think i can really go the just highlight over the spray route here with my drop pods since i primed in very humid weather and some of it isn't like even and has a textured almost look that i'd need to cover with some paint. It's nothing too bad, but would be noticeable if i didn't put at least one layer of black over it.... But i would still just like to know your method! Link to comment https://bolterandchainsword.com/topic/321752-the-blood-revenants-wip-1k-list-help/page/8/#findComment-4511815 Share on other sites More sharing options...
Charlo Posted September 23, 2016 Share Posted September 23, 2016 Halfords matte black spray. Thats it really! I use it for all my undercoating. It leaves a really nice finish that lets just enough natural light bounce off. I do a very little bit of silver edge hilights too, but not much. My storm raven is pretty much just black spray: http://i1380.photobucket.com/albums/ah177/nevscorner/Raven_zpskhht9gnn.jpg Dont-Be-Haten 1 Back to top Link to comment https://bolterandchainsword.com/topic/321752-the-blood-revenants-wip-1k-list-help/page/8/#findComment-4511828 Share on other sites More sharing options...
Arkangilos Posted September 23, 2016 Share Posted September 23, 2016 Sweet DC and chaplain! Looking great man! How'd you get the white so smooth? Link to comment https://bolterandchainsword.com/topic/321752-the-blood-revenants-wip-1k-list-help/page/8/#findComment-4511837 Share on other sites More sharing options...
Damon Nightman Posted September 23, 2016 Author Share Posted September 23, 2016 (edited) Thank you Ark! I've had people at the shop ask me that too, but all i do is prime it the GW corax white? and put one maybe two layers of ulthuan grey. I add nuln oil to the undercoat before i add the ulthuan grey. In the fluff would it be extremely out of the ordinary to have white chaplains? Charlo, that raven looks awesome. Next question, how did you do the windows? Edited September 23, 2016 by Brother Lemartes Link to comment https://bolterandchainsword.com/topic/321752-the-blood-revenants-wip-1k-list-help/page/8/#findComment-4511845 Share on other sites More sharing options...
Arkangilos Posted September 23, 2016 Share Posted September 23, 2016 Well the black armor is symbolic, so you'd have to inject some other symbolism to make it work. Since your guys are the Revenants, I'd just go back to the rebirth thing. Rather than being black in mourning for the Emperor, they are white in the purity of rebirth? Anyways, something to explain it would be all you need. Damon Nightman 1 Back to top Link to comment https://bolterandchainsword.com/topic/321752-the-blood-revenants-wip-1k-list-help/page/8/#findComment-4511881 Share on other sites More sharing options...
Charlo Posted September 23, 2016 Share Posted September 23, 2016 Whit Chaplain? No issue at all from me. Your chapter just does something a little different. Maybe it's to make them look like ghosts etc. And thanks! I am rather proud of the Raven. Windows were simply covered in the old school GW Green Ink :P I heavily dry-brushed the Techmarine and servitor a lime green on thier front and then built up to white in small areas, so it looked like the console was illuminating them from inside. Damon Nightman 1 Back to top Link to comment https://bolterandchainsword.com/topic/321752-the-blood-revenants-wip-1k-list-help/page/8/#findComment-4512081 Share on other sites More sharing options...
Grazcruzk Posted September 25, 2016 Share Posted September 25, 2016 The white chaplain is awesome! I thought the skull helm worked pretty well, have you tried doing it cream or off-white? I think the mkiv helms give a pretty good skull feel to them as it is. Damon Nightman 1 Back to top Link to comment https://bolterandchainsword.com/topic/321752-the-blood-revenants-wip-1k-list-help/page/8/#findComment-4514132 Share on other sites More sharing options...
Damon Nightman Posted September 28, 2016 Author Share Posted September 28, 2016 (edited) Thank you Graz! I have not tried a cream or off-white color, but you mentioning that makes me want to incorporate it somewhere. Were you suggesting cream (ushabiti bone is what I would use) for the skull effect on the helm? So basically still all white with a cream/skull helm? On a different note... I was planning on white SG, but now since I've done white for chaplains and Priests, it might be too much to have SG white as well. Maybe I'll do a one colored SG? Or bone colored SP and keep SG white? Or black SG with gold deathmasks? Man I'm so indecisive lol. Every time I think I have something set in stone, other options start popping into my he'd lol Edited September 28, 2016 by Brother Lemartes Link to comment https://bolterandchainsword.com/topic/321752-the-blood-revenants-wip-1k-list-help/page/8/#findComment-4514506 Share on other sites More sharing options...
Grazcruzk Posted September 29, 2016 Share Posted September 29, 2016 Were you suggesting cream (ushabiti bone is what I would use) for the skull effect on the helm? So basically still all white with a cream/skull helm? Yeah, I was imagining just for the helm. Subtle but obvious nod to the traditional skull theme! Link to comment https://bolterandchainsword.com/topic/321752-the-blood-revenants-wip-1k-list-help/page/8/#findComment-4514955 Share on other sites More sharing options...
LutherMax Posted September 29, 2016 Share Posted September 29, 2016 The white face plates work great, and I dig the alabaster chaplain too. Link to comment https://bolterandchainsword.com/topic/321752-the-blood-revenants-wip-1k-list-help/page/8/#findComment-4514960 Share on other sites More sharing options...
Damon Nightman Posted September 29, 2016 Author Share Posted September 29, 2016 Thank you Luther! I'm gonna leave the helm white for now since I don't feel like messing with this guy anymore until I finish the ridiculous amount of other stuff I have and keep ordering... But that sounds like a good idea Graz. I'll try it on my next chap who also does not have a skull helm... Hope no one cares that half of my chaps will be rocking regularish helms... Link to comment https://bolterandchainsword.com/topic/321752-the-blood-revenants-wip-1k-list-help/page/8/#findComment-4515462 Share on other sites More sharing options...
Damon Nightman Posted October 12, 2016 Author Share Posted October 12, 2016 Some DC I'm working on: Grazcruzk 1 Back to top Link to comment https://bolterandchainsword.com/topic/321752-the-blood-revenants-wip-1k-list-help/page/8/#findComment-4528357 Share on other sites More sharing options...
Grazcruzk Posted October 12, 2016 Share Posted October 12, 2016 oooh, nice work! Nice poses all around. Good use of the mk viii legs on the fist fellow, is that a custom job on the fingers? I don't recognize it. Link to comment https://bolterandchainsword.com/topic/321752-the-blood-revenants-wip-1k-list-help/page/8/#findComment-4528368 Share on other sites More sharing options...
Charlo Posted October 12, 2016 Share Posted October 12, 2016 Looking good in MkIV! Link to comment https://bolterandchainsword.com/topic/321752-the-blood-revenants-wip-1k-list-help/page/8/#findComment-4528534 Share on other sites More sharing options...
Damon Nightman Posted October 12, 2016 Author Share Posted October 12, 2016 (edited) Thanks guys! That's the power fist from the Assault squad box, Graz. Honestly not too happy with how they are turning out so far. Black looked a lot better on the DC armor with all the bling to break it up.... Edited October 12, 2016 by Brother Lemartes Charlo 1 Back to top Link to comment https://bolterandchainsword.com/topic/321752-the-blood-revenants-wip-1k-list-help/page/8/#findComment-4528608 Share on other sites More sharing options...
Grazcruzk Posted October 12, 2016 Share Posted October 12, 2016 Running into a similar problem. I like less bling and there isn't a lot of room between bare mkiv and totally fanced up DC/BA bits. They are certainly dead ringers for DC, although the lack of scrolls and all is a little against the traditional fluff. I like them. Link to comment https://bolterandchainsword.com/topic/321752-the-blood-revenants-wip-1k-list-help/page/8/#findComment-4529046 Share on other sites More sharing options...
Damon Nightman Posted October 12, 2016 Author Share Posted October 12, 2016 I still need to add the X and give them red knee pads, so hopefully that helps... I too wanted to avoid a lot a bling in general for my army, but it's rough if you want to use any of the BA kits... These guys are going to stand out compared to my "normal" DC using the DC kit. My reasoning/justification is if a vet falls to the rage, his armor is painted black and the bling is left alone. If a newbie falls, armor is painted black and no bling is added. So basically you can vaguely tell where each DC came from judging by the bling. The DC bling matches my regular chapter badge/theme so it's not like specific DC heraldry that they have in my chapter at least... Link to comment https://bolterandchainsword.com/topic/321752-the-blood-revenants-wip-1k-list-help/page/8/#findComment-4529092 Share on other sites More sharing options...
Charlo Posted October 12, 2016 Share Posted October 12, 2016 I think they look fine dude. They aren't as blinged but they'll look fine mixed among other DC. Link to comment https://bolterandchainsword.com/topic/321752-the-blood-revenants-wip-1k-list-help/page/8/#findComment-4529246 Share on other sites More sharing options...
Damon Nightman Posted October 12, 2016 Author Share Posted October 12, 2016 Only fine?!?! Haha I'm just kidding dude, thank you I really appreciate it! You are putting my mind at ease lol Well next on the list is trying to assemble 2 Baal preds and a Redeemer by Saturday... I want to try and squeeze in a Lost brotherhood with LATF at 1500pts... Link to comment https://bolterandchainsword.com/topic/321752-the-blood-revenants-wip-1k-list-help/page/8/#findComment-4529256 Share on other sites More sharing options...
Damon Nightman Posted October 19, 2016 Author Share Posted October 19, 2016 (edited) 2k list for campaign game this weekend. I'm up against necrons, but did not tailor this list for that nor do I want to list tailor. I know this won't be a good matchup with all the vehicles, but I don't care really. Also somewhat restricted with models to make changes... +++ The Lost 2k (1997pts) +++ ++ Blood Angels: Codex (2014) (BA Lost Brotherhood Strike Force) ++ + Core (Lost Brotherhood) + "Death Company Strike Force" ····Death Company Chaplain [Crozius Arcanum, Frag and Krak grenades, Inferno Pistol, Jump Pack, Rosarius, The Guilded Crozius] ····Death Company Dreadnought [blood Talons, Magna-grapple, Meltagun and storm bolter, Searchlight] ········Drop Pod [storm Bolter ····Death Company Dreadnought [blood Talons, Magna-grapple, Meltagun and storm bolter, Searchlight] ········Drop Pod [storm Bolter ····Death Company Squad [6x Bolt Pistol, Bolter, 5x Chainsword, 7x Death Company Marine, Frag and Krak grenades, Jump Pack, Power Fist, Power Weapon] ····Death Company Squad [6x Bolt Pistol, Bolter, 5x Chainsword, 7x Death Company Marine, Frag and Krak grenades, Jump Pack, Power Fist, Power Weapon] ····Death Company Squad [4x Bolt Pistol, Bolter, 4x Chainsword, 5x Death Company Marine, Frag and Krak grenades, Power Fist] + Command (Lost Brotherhood) + Death Company Command ····Lemartes, Guardian of the Lost [bolt Pistol, Rosarius, The Blood Crozius] + Auxiliary (Lost Brotherhood) + "Luficer Armoured Task Force" ····Baal Predator Squadron ········Baal Predator [Dozer Blade, Heavy bolters, Overcharged engines, Searchlight, Smoke launchers, Twin-linked Assault Cannon] ····Baal Predator Squadron ········Baal Predator [Dozer Blade, Flamestorm Cannon, Overcharged engines, Searchlight, Smoke launchers, Storm bolter ····Land Raider Redeemer [2x Flamestorm cannon, Frag assault launchers, Pintle Multi-melta, Searchlight, Smoke launcher, Twin-linked assault cannon] ····Predator Squadron ········Predator [Dozer Blade, Lascannon, Searchlight, Smoke launchers, Twin-linked Las-cannon ····Techmarine [Artificer Armour, Bolt Pistol, Boltgun, Frag and Krak grenades, Servo-arm] Rapid Assault Force ····Assault Squad [4x Assault Marines, Frag and Krak grenades, 2x Meltagun] ········Assault Sergeant [Chainsword, Inferno Pistol] ········Drop Pod [storm Bolter] Created with BattleScribe (http://www.battlescribe.net) Edited October 19, 2016 by Brother Lemartes LutherMax 1 Back to top Link to comment https://bolterandchainsword.com/topic/321752-the-blood-revenants-wip-1k-list-help/page/8/#findComment-4537239 Share on other sites More sharing options...
LutherMax Posted October 19, 2016 Share Posted October 19, 2016 Looks good! What's the battle plan? Damon Nightman 1 Back to top Link to comment https://bolterandchainsword.com/topic/321752-the-blood-revenants-wip-1k-list-help/page/8/#findComment-4537547 Share on other sites More sharing options...
Damon Nightman Posted October 19, 2016 Author Share Posted October 19, 2016 Pray for first turn and hope my opponent doesn't hide lol. If he gives me a good target for meltacide I'll drop them in with a dread 1st turn. If not, 2 DC dreads coming down to distract while everything else zooms up the field. I'm bringing myself since I was using the model as a DC chap and thought I'd just try being me and see how that works out. I'm thinking I'll be the warlord and try and get a +4 Fnp with the trait. I've squeaked out 2 campaign victories against these necrons already (at 1and 1.5k). I just ran up the field and assaulted as much as possible. It doesn't end up too well, I can't really kill too much in the decurion, but I've been able to tie him up and have barely enough stuff left to cap the objectives at the end to win. I'm hoping to pull that off again. Necrons are so slow I can just beat them to the objectives if I have anything left by the end. No idea what the mission is yet this week though. Link to comment https://bolterandchainsword.com/topic/321752-the-blood-revenants-wip-1k-list-help/page/8/#findComment-4537587 Share on other sites More sharing options...
LutherMax Posted October 19, 2016 Share Posted October 19, 2016 Sounds good. I wasn't sure what you meant at first when you said "bring me", "being me" - but then I realised :D Damon Nightman 1 Back to top Link to comment https://bolterandchainsword.com/topic/321752-the-blood-revenants-wip-1k-list-help/page/8/#findComment-4537614 Share on other sites More sharing options...
Damon Nightman Posted October 19, 2016 Author Share Posted October 19, 2016 Haha, yeah ever since charlo tried taking my name I've had to really own it ;) Thank you for commenting! Charlo 1 Back to top Link to comment https://bolterandchainsword.com/topic/321752-the-blood-revenants-wip-1k-list-help/page/8/#findComment-4537620 Share on other sites More sharing options...
Dont-Be-Haten Posted October 20, 2016 Share Posted October 20, 2016 Always remember to "shoot" (throw) grenades when in range. I used to always forget I could 3/4x melta and throw a grenade on one of the non melta guys. Depending on what he brings always screen your models as best you can do he has to shoot through your units. A 5+ cover save against gauss is better than nothing. If he brings lychstar don't try to crash into it unless you absolutely have to, work around it. Your dreads will auto force necron Warriors to use our weapons are useless, unless he wants to tar pit it until his wraiths or lychguard can move within striking range. Focus fire his wraiths with your dakka preds, T5 and 3++ aren't that scarey when you pump them full of mid strength weapons fire and force saves. Scarabs die in droves to template weapons, even though spyders can become annoying. Don't get discouraged by re-ans as that's just how the army plays, win through assault and weight of attacks. Always stay out of rapid fire range with tanks/dreads until you are fairly certain you can get the assault off, or screen your dreads with death company squads to give him the aformentioned cover save and then multi assault. Damon Nightman 1 Back to top Link to comment https://bolterandchainsword.com/topic/321752-the-blood-revenants-wip-1k-list-help/page/8/#findComment-4537859 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now