Graymane Posted January 11, 2017 Share Posted January 11, 2017 Greetings Brothers, As some of you know, I recently started the long journey of building my wolf army. Following a few test models I thought where else to start in earnest than with a suitable lord and master for this great company. Over Christmas, I was lucky enough to receive the 30k Terminator Captain and chaplain from my better half and though I'd have a go at converting up something interesting using the terminator. I started off with this: But was not entirely convinced on the weaponry load-out and some more observant members pointed out that the flow of the model was off. So I changed the weaponry and head, greenstuffed some wolf pelt over the strapping and added a couple of wolf bits. I also realised that a Space Wolf Dreadnought crotch-wolf would fit almost perfectly over the shoulders of the terminator. So I press-moulded one in grey-stuff (It's more pliable) and tried it for size... As you can see, once I popped the mould the size was slightly off and unfortunately lost the fangs from the head. So I glued the parts in place and set about filling gaps with some greenstuff. Here it is base coated.(Please forgive the crappy picture quality) .... And here is an additional pic next a normal PA marine for scale. I think he looks suitably bulky (and again sorry for the terrible pic quality) Anyway, that's him so far. I hope you like him! Any comments and feedback welcome! Oh and a name! He needs a name! Thinking possibly 'Haakon Greymane' as my battlefield namesake. Cheers for now! GM Link to comment https://bolterandchainsword.com/topic/329752-wolflord-cataphractii-terminator-conversion-complete/ Share on other sites More sharing options...
Bjorn Firewalker Posted January 11, 2017 Share Posted January 11, 2017 Excellent work. Link to comment https://bolterandchainsword.com/topic/329752-wolflord-cataphractii-terminator-conversion-complete/#findComment-4620644 Share on other sites More sharing options...
Lord Commander Eidolon Posted January 11, 2017 Share Posted January 11, 2017 Oh yeah! Nice work! The revision is in a totally different league!! Looking forward to seeing what comes next!! Link to comment https://bolterandchainsword.com/topic/329752-wolflord-cataphractii-terminator-conversion-complete/#findComment-4620724 Share on other sites More sharing options...
Gawain Veteris Posted January 11, 2017 Share Posted January 11, 2017 Love it. Simple changes which makes the wolf lord ooze with character! I look forward to seeing more. Link to comment https://bolterandchainsword.com/topic/329752-wolflord-cataphractii-terminator-conversion-complete/#findComment-4620728 Share on other sites More sharing options...
Graymane Posted January 18, 2017 Author Share Posted January 18, 2017 Only a mini update so far. I have started painting the armour and have edited the build slightly again (pics to follow soon as i can take some). However I have managed to get the head done... Hopefully it will look ok in place! Link to comment https://bolterandchainsword.com/topic/329752-wolflord-cataphractii-terminator-conversion-complete/#findComment-4627592 Share on other sites More sharing options...
Dantay VI Posted January 19, 2017 Share Posted January 19, 2017 Looks great. Link to comment https://bolterandchainsword.com/topic/329752-wolflord-cataphractii-terminator-conversion-complete/#findComment-4628431 Share on other sites More sharing options...
Graymane Posted January 19, 2017 Author Share Posted January 19, 2017 Greetings Brothers, Sisters and assorted humanoids, So, update 3. Here are some pics of him painted so far. Basic colouring with much more inking, highlighting etc needed before hes done. I have also added some fur sections, which i think add some movement and a degree of bulk (The more eagle eyed amongst you might recognise them from the Chaos Marauder horsemen box, with a little additional green stuff). And just because i can, a storm-shield slung across his back adds a degree of viking bad-assery. So far he appears to be coming along ok. One sneaky fix i am rather pleased with is that when i fitted the head the gap for the neck became painfully obvious... and so.... the addition of one swiftly snipped plat later.... Win. Right. Time do do some highlights and paint some weapons. Hope you like him so far! Link to comment https://bolterandchainsword.com/topic/329752-wolflord-cataphractii-terminator-conversion-complete/#findComment-4628664 Share on other sites More sharing options...
Bjorn Firewalker Posted January 20, 2017 Share Posted January 20, 2017 Well done. Link to comment https://bolterandchainsword.com/topic/329752-wolflord-cataphractii-terminator-conversion-complete/#findComment-4628820 Share on other sites More sharing options...
Vykryl Posted January 20, 2017 Share Posted January 20, 2017 Looking good. Much more savage and everything is blowing the same direction ;) Link to comment https://bolterandchainsword.com/topic/329752-wolflord-cataphractii-terminator-conversion-complete/#findComment-4629169 Share on other sites More sharing options...
Graymane Posted January 30, 2017 Author Share Posted January 30, 2017 Greetings! So at long last, this conversion is largely complete! :) I'll post some better pics as soon as I can. Hope you like him! Any feedback /comments welcome. :D Cheers, GM Link to comment https://bolterandchainsword.com/topic/329752-wolflord-cataphractii-terminator-conversion-complete/#findComment-4638612 Share on other sites More sharing options...
Guest Triszin Posted January 30, 2017 Share Posted January 30, 2017 nice wolf lord! awesome snow effects on the cape Link to comment https://bolterandchainsword.com/topic/329752-wolflord-cataphractii-terminator-conversion-complete/#findComment-4638616 Share on other sites More sharing options...
Graymane Posted March 5, 2017 Author Share Posted March 5, 2017 Hello folks, Well, have at last got the finished lord in front of a camera so here are some shots of the finished model... He was fun to build. I hope you like him. Any comments and/or feedback welcome as usual. Cheers, GM Link to comment https://bolterandchainsword.com/topic/329752-wolflord-cataphractii-terminator-conversion-complete/#findComment-4674050 Share on other sites More sharing options...
The Traitor Posted March 5, 2017 Share Posted March 5, 2017 He's looking great, I specially like the runes of the sword, quite a nice effect you've got there! However I would seriously think about trimming the base in black, it may be me but I think that they always look neater in that way... Link to comment https://bolterandchainsword.com/topic/329752-wolflord-cataphractii-terminator-conversion-complete/#findComment-4674086 Share on other sites More sharing options...
KrautScientist Posted March 5, 2017 Share Posted March 5, 2017 Excellent work on the Wolf Lord! That head is excellent for Space Wolves (used it as well on my traitorous Wolf Lord), and I really like the inclusion of the shield on his back. And the snow on his feet and on the bottom of his cape is a nice touch! Link to comment https://bolterandchainsword.com/topic/329752-wolflord-cataphractii-terminator-conversion-complete/#findComment-4674123 Share on other sites More sharing options...
Graymane Posted March 6, 2017 Author Share Posted March 6, 2017 Thank you both! :) Glad you like him. :D Cheers, GM Link to comment https://bolterandchainsword.com/topic/329752-wolflord-cataphractii-terminator-conversion-complete/#findComment-4675334 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.