KrautScientist Posted August 18, 2018 Share Posted August 18, 2018 The purple is looking great -- why on earth didn't you get rid of those really noticeable mold lines on the shin armour and feet, though...? Link to comment Share on other sites More sharing options...
betrayer41 Posted August 18, 2018 Author Share Posted August 18, 2018 Hahah this is a complete 100% test model. Had some primaris and a few counterfeit ec bits that I threw together don’t plan on using him. Link to comment Share on other sites More sharing options...
hushrong Posted August 18, 2018 Share Posted August 18, 2018 *starts packing up my EC. Yup! That’s a fantastic metallic paint job! Also picked up Rust-Oleum from your earlier recommendation for priming and I love it. Thanks again for that! Link to comment Share on other sites More sharing options...
Jackalwolf Posted August 20, 2018 Share Posted August 20, 2018 Omg so cool. Where did you get the knee pads from? Thanks mate! They’re from shapeways, night just make primaris useable haha Pre- or Post-Heresy? Honestly, after Slaanesh's influence, they can be just about any shade. The more garish the better. Much like my WE...... around battle of terra/scouring so they still have some of that classic EC look but have been influenced by chaos Here we go! Much happier. I think I’m going with this http://i.imgur.com/fqH1OrC.jpg Woah, mind linking the Shapeways store? Link to comment Share on other sites More sharing options...
Midnightmare Posted August 21, 2018 Share Posted August 21, 2018 (edited) Wow- All your stuff is so characterful. Great use of bits throughout your stuff, you are really talented with your converting especially!! Your killteam is coming along great(love that book!). I haven’t seen a side by side, but just remember that Abaddon is big for an astartes :) Your Worldeaters take the biscuit though, they are brilliantly done, hats off too you :tu: Quick question, the treads for your Spartan (Machinators Oppressor pattern?) I have seen them on a Templar one and wasn’t sure of them at first on a tank of that size, but they really look the part. So much so I am going to get some for mine I think! What size did you order and how many did you need? Cheers :) Edited August 21, 2018 by Midnight Runner betrayer41 1 Back to top Link to comment Share on other sites More sharing options...
betrayer41 Posted August 21, 2018 Author Share Posted August 21, 2018 Wow- All your stuff is so characterful. Great use of bits throughout your stuff, you are really talented with your converting especially!! Your killteam is coming along great(love that book!). I haven’t seen a side by side, but just remember that Abaddon is big for an astartes Your Worldeaters take the biscuit though, they are brilliantly done, hats off too you Quick question, the treads for your Spartan (Machinators Oppressor pattern?) I have seen them on a Templar one and wasn’t sure of them at first on a tank of that size, but they really look the part. So much so I am going to get some for mine I think! What size did you order and how many did you need? Cheers Thanks Mate very much appreciated. One of my favorite parts of the hobby is Kitbashing. Here's what i ordered: X3 Oppressor Pattern 0 Tank Treads (40) Midnightmare 1 Back to top Link to comment Share on other sites More sharing options...
Midnightmare Posted August 21, 2018 Share Posted August 21, 2018 Awesome, cheers :tu: :tu: They look brutal, a very good alternative to those horrible to fit originals!! Link to comment Share on other sites More sharing options...
Borky Posted August 22, 2018 Share Posted August 22, 2018 (edited) Omg so cool. Where did you get the knee pads from? Thanks mate! They’re from shapeways, night just make primaris useable hahaPre- or Post-Heresy? Honestly, after Slaanesh's influence, they can be just about any shade. The more garish the better.Much like my WE...... around battle of terra/scouring so they still have some of that classic EC look but have been influenced by chaosHere we go! Much happier. I think I’m going with this http://i.imgur.com/fqH1OrC.jpg Woah, mind linking the Shapeways store?This is the store link to the pads. I’m just wondering which type of plastic you ordered? Looks fantastic by the way! Been following your thread for a while in the background. Inspiring stuff!https://www.shapeways.com/product/NB5M4MFA2/gothic-knee-armour-plates-mk7-x18?optionId=57748116&li=marketplace Edited August 22, 2018 by Borky hushrong 1 Back to top Link to comment Share on other sites More sharing options...
betrayer41 Posted August 23, 2018 Author Share Posted August 23, 2018 Thanks man. I got the frost ultra detail. So.....I broke down and placed a forgeworld order....... hushrong 1 Back to top Link to comment Share on other sites More sharing options...
DuskRaider Posted August 23, 2018 Share Posted August 23, 2018 Bummer dude. Get hit with the new rates? Link to comment Share on other sites More sharing options...
hushrong Posted August 23, 2018 Share Posted August 23, 2018 I signed on and got the ‘smoothest fine’ as it sound silky and fancy ;) Looking forward to putting it to use! It looks loads better than me trying to make mk4 kneepads. And bro... I almost feel like crap for constantly putting off my purchase. Now I’m like some kind of street urchin scrounging around eBay looking for deals! Link to comment Share on other sites More sharing options...
betrayer41 Posted August 23, 2018 Author Share Posted August 23, 2018 Yea it was like 95 bucks for a rhino with shipping......So i Just found enough stuff to get me to 120 for free shipping and FW ROYALY up my Valdor Gold paint order so I forgot i Have a voucher for 50 bucks........So more or less paying 70 so i dont feel as bad Link to comment Share on other sites More sharing options...
hushrong Posted August 23, 2018 Share Posted August 23, 2018 Man, that escalated quickly! I really hope their pricing crap goes to back to being reasonable. Especially since I was excited about future AT upgrades. Just going to head over to the Winchester, have a pint, and wait for this all to blow over. Midnightmare and Dosjetka 2 Back to top Link to comment Share on other sites More sharing options...
Dantay VI Posted August 27, 2018 Share Posted August 27, 2018 I have some opened but unused valdor gold! FW really seem to be swinging hard and missin lately... That purple is gorgeous btw Link to comment Share on other sites More sharing options...
Gederas Posted August 27, 2018 Share Posted August 27, 2018 Man, that escalated quickly! I really hope their pricing crap goes to back to being reasonable. Especially since I was excited about future AT upgrades. Just going to head over to the Winchester, have a pint, and wait for this all to blow over. Actually, it is reasonable. The pricing has to be as it is for Games Workshop to even be able to open a Forge World warehouse in the US. I was speaking to someone about it yesterday, and he made a good point: "Take the Warlord Titan. In 2014 you would have paid, in US Dollars, around 2200. Two years ago? 1400. Now, for them to be able to have that warehouse in the US and sell in the United States' currency, they had to have a flat rate that also anticipaied the pound rising and falling. It's the same reason why everything sold here (in reference to the GW store we were in) is priced as it is." Here's the kicker though: The opening of the Forge World warehouse in the US is even better for players here. Because that's the first step for being able to order Forge World stuff at your local Games Workshop store. The same thing happened with Black Library: Every new release from Black Library can be ordered directly from a GW store as well as being able to be ordered from the Black Library site. Link to comment Share on other sites More sharing options...
betrayer41 Posted August 28, 2018 Author Share Posted August 28, 2018 So yes this price hike sucks. However..../// I will say, having my order actually placed on Friday and having it delivered today is insane.....: guys don’t let me keep ordering I’m a sucker for quick delivery. On a side not my compressor is broken so just building up killteams http://i.imgur.com/LlB3H1Q.jpg http://i.imgur.com/oF6URpg.jpg http://i.imgur.com/rXRrLGJ.jpg http://i.imgur.com/kV3t2tj.jpg http://i.imgur.com/thHVbMG.jpg http://i.imgur.com/2SUK37L.jpg sockwithaticket 1 Back to top Link to comment Share on other sites More sharing options...
betrayer41 Posted September 5, 2018 Author Share Posted September 5, 2018 Waiting for new compressor. Decided to start in destroyer/raptor squad and kharns rhino. Which heads are you guys feelin? http://i.imgur.com/luJxpTt.jpg http://i.imgur.com/Ikx6paE.jpg http://i.imgur.com/yrtxWnK.jpg http://i.imgur.com/aaCGfQS.jpg http://i.imgur.com/x5IkAfM.jpg Link to comment Share on other sites More sharing options...
Naryn Posted September 5, 2018 Share Posted September 5, 2018 Looking good! I really like the Anvil guy with the plasma (?) gun. As for the destroyer, I quite like the Reiver helmeted head over the others. It has a grimness they lack. How many destroyer/raptors are you planning on making? Link to comment Share on other sites More sharing options...
Pearson73 Posted September 5, 2018 Share Posted September 5, 2018 I think the Reiver heads work really well, the chains on the model are a solid idea and really improve it. The front plate on the Rhino looks great. Link to comment Share on other sites More sharing options...
betrayer41 Posted September 5, 2018 Author Share Posted September 5, 2018 Thanks guys. I am going to do Reiver Bare head for Skane since he already had that voice thing on this throat so kind of make sense. Im about 50/50 on reiver heads and just good ole Mkiv to keep it close to the old WE destroyer art work Link to comment Share on other sites More sharing options...
betrayer41 Posted September 5, 2018 Author Share Posted September 5, 2018 Looking good! I really like the Anvil guy with the plasma (?) gun. As for the destroyer, I quite like the Reiver helmeted head over the others. It has a grimness they lack. How many destroyer/raptors are you planning on making? i would like to make 10 but i Need Ashen circle to make them, and unfortunately im not paying 66 bucks plus shipping to chop up a unit haha. What would be the best way to kit them out to make them resemble destroyers? Link to comment Share on other sites More sharing options...
betrayer41 Posted September 8, 2018 Author Share Posted September 8, 2018 Bit more work on the skane’s destroyer raptors, did my best to use only bits I had here. The combi plasma is actually just a plasma I just think it looks cooler. I have to order grenades for the bandoliers tho! These have been fun, enjoy! http://i.imgur.com/Og07pL1.jpg http://i.imgur.com/PZJZ1Oq.jpg http://i.imgur.com/lmGBJrT.jpg http://i.imgur.com/lf1NP8Y.jpg http://i.imgur.com/ypWuQIY.jpg Pearson73, Jackalwolf and DuskRaider 3 Back to top Link to comment Share on other sites More sharing options...
Pearson73 Posted September 8, 2018 Share Posted September 8, 2018 Very good, the pointing fellow has some real gravitas. The plasma pistol looks cool with all the wires. Link to comment Share on other sites More sharing options...
Jackalwolf Posted September 8, 2018 Share Posted September 8, 2018 (edited) Really cool dudes, and presumably true scale right? Edited September 8, 2018 by Grieux Link to comment Share on other sites More sharing options...
hushrong Posted September 10, 2018 Share Posted September 10, 2018 Those destroyers look sweet! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now