Captain Semper Posted May 16, 2018 Author Share Posted May 16, 2018 First of all let me tell you that I'm really in awe by the momentum of the LatD! And I can certainly expand the perimeter of the units allowed to include the Dark Mechanicus units and the Eyerine Cult! It's fitting and fluffy! 2. VOWS: Each participant is called to make at least one and up to a maximum of five (5) vows pledging to paint legal units from the Codex or any other army list associated with his/her Faction of choice. Also each vow should not exceed the limit of 3,000 pts. For more details regarding the content of the vow, please see “Legal Entries” section below. That's from the etl v link in the captains sig... Edit: also, from the faq bit: Q: I pledge for Chaos. Can I use units form all associated Codices and FW lists? And can I do it in the same vow? A: Yes! Chaos has a single Strategium and as such any unit from any associated list is ETL-legal. Even within the same vow! Dunno if that counts or not, I'm quite out of date with terminology here. Sorry spafe, you're quoting ETL V rules there... The rules for ETL VI (that I had not yet linked in my sig) state otherwise... I now will proceed to add the ETL VI rules in my sig for easy reference! Link to comment https://bolterandchainsword.com/topic/346736-the-lost-and-the-damned-outpost/page/3/#findComment-5083398 Share on other sites More sharing options...
spafe Posted May 17, 2018 Share Posted May 17, 2018 Doh! I didn;t even think to cehck what ETL this was Captain! Sorry! I just went for the latest one in your sig I'll give them a read over this lunchtime then and make sure I'm still vaguely aware of what I'm doing. Link to comment https://bolterandchainsword.com/topic/346736-the-lost-and-the-damned-outpost/page/3/#findComment-5083906 Share on other sites More sharing options...
Tamika Posted May 18, 2018 Share Posted May 18, 2018 Update: -Arvus Lighters are an absolutely nightmare to get right. So many problems with the casting but not bad enough to ask for replacements. They really must be at the end of the life of the molds. They are ready for assembly. -Hell Blades are assembled with flight stand, base and ready to paint, they’re easy to assemble in comparison but you can tell the mold is aging badly as lots of little errors in the details. -Preparing infantry for assembly over the weekend Link to comment https://bolterandchainsword.com/topic/346736-the-lost-and-the-damned-outpost/page/3/#findComment-5085031 Share on other sites More sharing options...
Captain Semper Posted May 18, 2018 Author Share Posted May 18, 2018 Welcome Tamilka - failed to officially welcome you to the ETL... With 4,111 points, it's the biggest vow in the entire Realm of Chaos Faction - who would have thought that it will come from the LatD, eh? Well it's still early days and this may change, but it's very impressive to say the least UPDATED TO THIS POINT! Link to comment https://bolterandchainsword.com/topic/346736-the-lost-and-the-damned-outpost/page/3/#findComment-5085425 Share on other sites More sharing options...
Stray Posted May 19, 2018 Share Posted May 19, 2018 I think it's time for a second vow. I noticed Tamika has provided us with three Hell Blades, so I figure the forges of Xana II should open again and churn out a Hell Talon to keep them company: http://i563.photobucket.com/albums/ss78/tcgfade0ut/WIN_20180519_19_11_55_Pro_zpsxs0zfv7g.jpg Seriously, this thing is HUGE! Next to it, is the completed Castigator chassis so you can get an idea for just how big the model is. I really wasn't expecting it to be on that scale to be honest. How big are the Hell Blades Tamika? Vow 2. Hell Talon. 12 PL, 250 points with selected & modeled war gear. Death to the corpse lord on the golden throne! Link to comment https://bolterandchainsword.com/topic/346736-the-lost-and-the-damned-outpost/page/3/#findComment-5086138 Share on other sites More sharing options...
Tamika Posted May 19, 2018 Share Posted May 19, 2018 Hell Talon is a fantastic model so happy to see you building and painting it... here are her three little sisters: Sorry there is no side to side for scale comparisons... I will do that later next to some troopers and the Arvus Lighters :) And here is the big box of mayhem that will take a while to just prepare let alone assemble and paint... Link to comment https://bolterandchainsword.com/topic/346736-the-lost-and-the-damned-outpost/page/3/#findComment-5086281 Share on other sites More sharing options...
Azekai Posted May 19, 2018 Share Posted May 19, 2018 I got ya, Stray; I have an Atropos and a couple of hell talons and snapped a pic:Seems significantly smaller... the bomber is a big boy!@Tamika those flying stands look sweet. Can't wait to see those fliers daubed in the colors of rebellion! Link to comment https://bolterandchainsword.com/topic/346736-the-lost-and-the-damned-outpost/page/3/#findComment-5086287 Share on other sites More sharing options...
Tamika Posted May 20, 2018 Share Posted May 20, 2018 Arvus Lighters... not sure whether to bother with flight stands? They’re fairly steady on their feet and don’t wobble. Not sure whether to green stuff the gaps and fix further errors or leave as is and give it some character. Link to comment https://bolterandchainsword.com/topic/346736-the-lost-and-the-damned-outpost/page/3/#findComment-5086405 Share on other sites More sharing options...
Stray Posted May 20, 2018 Share Posted May 20, 2018 Those Hell Blades are beautiful gents! Thank you! It's a really evocative kit, and nice that it's so unique to our faction in design. I'm going have to pick up a couple myself once I learn to summon 'Monae' - pretty sure he/she is a daemon of Slannesh, as they certainly seem required when I desire something... :P Link to comment https://bolterandchainsword.com/topic/346736-the-lost-and-the-damned-outpost/page/3/#findComment-5086408 Share on other sites More sharing options...
Dragonlover Posted May 20, 2018 Share Posted May 20, 2018 That's a *lot* of flyers, Xana II have certainly committed to the cause! Keep it up guys, we'll crush these upstart Imperials yet! Dragonlover Link to comment https://bolterandchainsword.com/topic/346736-the-lost-and-the-damned-outpost/page/3/#findComment-5086824 Share on other sites More sharing options...
Captain Semper Posted May 21, 2018 Author Share Posted May 21, 2018 Well, I'm glad I expanded the perimeter of what's allowed here - those Hell Talons look fantastic! And the Arvus Lighters are no less impressive! Keep going guys, this Forum is destined for greatness! UPDATED TO THIS POINT! Link to comment https://bolterandchainsword.com/topic/346736-the-lost-and-the-damned-outpost/page/3/#findComment-5087635 Share on other sites More sharing options...
Captain Semper Posted May 22, 2018 Author Share Posted May 22, 2018 THIS IS THE CUT-OFF FOR THE WEEKLY UPDATE - EVERY VOW OR COMPLETION REPORTED BEYOND THIS POINT WILL COUNT FOR NEXT WEEK'S UPDATE. UPDATED TO THIS POINT! Link to comment https://bolterandchainsword.com/topic/346736-the-lost-and-the-damned-outpost/page/3/#findComment-5088516 Share on other sites More sharing options...
Captain Semper Posted May 23, 2018 Author Share Posted May 23, 2018 http://fortressofunforgiven.homestead.com/ETL_VI_Top_Banner_.jpg ETL VI - WEEK 3 UPDATE Link to comment https://bolterandchainsword.com/topic/346736-the-lost-and-the-damned-outpost/page/3/#findComment-5089399 Share on other sites More sharing options...
Tamika Posted May 23, 2018 Share Posted May 23, 2018 Small update giving you an idea of how things will turn out... This is the Elysian base of my infantry.. the heads and backpacks will be cadian hazardous environment because the scale is perfect. They are Renegades but not very Chaos looking, they will take a lot of careful painting to get to that point. Hope this is ok with everyone... Link to comment https://bolterandchainsword.com/topic/346736-the-lost-and-the-damned-outpost/page/3/#findComment-5089655 Share on other sites More sharing options...
spafe Posted May 24, 2018 Share Posted May 24, 2018 Where's the pilot from ol chap? Would love to get a few of them for my tank crew regiment Link to comment https://bolterandchainsword.com/topic/346736-the-lost-and-the-damned-outpost/page/3/#findComment-5089838 Share on other sites More sharing options...
Tamika Posted May 24, 2018 Share Posted May 24, 2018 Thunderbolt pilot which is out of production. I’m pretty sure the one there in the photo I picked up from eBay is genuine despite the colour difference. Link to comment https://bolterandchainsword.com/topic/346736-the-lost-and-the-damned-outpost/page/3/#findComment-5089905 Share on other sites More sharing options...
spafe Posted May 24, 2018 Share Posted May 24, 2018 darn, no chance of me finding one now then. Link to comment https://bolterandchainsword.com/topic/346736-the-lost-and-the-damned-outpost/page/3/#findComment-5089914 Share on other sites More sharing options...
Nemerax Posted May 24, 2018 Share Posted May 24, 2018 Awesome Models Tamika. I love the Elysian Weapons, always remind me on Starship Troopers with their magazin on the back. Cannot wait to see them painted. Link to comment https://bolterandchainsword.com/topic/346736-the-lost-and-the-damned-outpost/page/3/#findComment-5089947 Share on other sites More sharing options...
Tamika Posted May 24, 2018 Share Posted May 24, 2018 Yeah I couldn’t resist the last chance to buy for them to use as a base for this Renegade faction.Spafe pop up regularly on eBay at a reasonable price, just do a saved search for email notifications when they get listed. All now on their flight stands and ready for priming! Link to comment https://bolterandchainsword.com/topic/346736-the-lost-and-the-damned-outpost/page/3/#findComment-5089979 Share on other sites More sharing options...
Azekai Posted May 26, 2018 Share Posted May 26, 2018 Lookin' good there Tamika. Can't wait to see the fliers get painted.I am working on my cultists, slowly. So slowly. I did manage to finish my spawn, though, so... hooray for doing the easy bits.I also threw this together in a bout of sleep deprived toy-cutting.Make of it what you will, but I would like for it to be... something useful for this competition. Not sure what.Did put a first couple of coats on Jagda, and my mutants are looking at me from the painting table with forlorn and accusatory glances. Onward ever upward. Link to comment https://bolterandchainsword.com/topic/346736-the-lost-and-the-damned-outpost/page/3/#findComment-5091196 Share on other sites More sharing options...
Captain Semper Posted May 26, 2018 Author Share Posted May 26, 2018 I have no real reference for its size, but couldn't it be passed off a count-as Skull Cannon? Adding a few bloodletters obviously... Sorry, for a moment there I thought I was in the Daemons Outpost - it looks so Daemonic though... Let's see... Armoured sentinel? THIS IS THE LAST WEEKEND OF THE RECRUITMENT PERIOD - MAKE THE MOST OF IT! UPDATED TO THIS POINT! Link to comment https://bolterandchainsword.com/topic/346736-the-lost-and-the-damned-outpost/page/3/#findComment-5091271 Share on other sites More sharing options...
Tamika Posted May 26, 2018 Share Posted May 26, 2018 Greater Brass Scorpion for sure! Link to comment https://bolterandchainsword.com/topic/346736-the-lost-and-the-damned-outpost/page/3/#findComment-5091287 Share on other sites More sharing options...
Azekai Posted May 27, 2018 Share Posted May 27, 2018 Hmmm... the scuttling thing is only on a dreadnought base, so it would have to be a baby scorpion... and Cap, it does look daemonic, probably too much for my renegades. I might shelve it for now and mull it over. Worst case scenario I paint it up for my Death Guard later and use it as a blight hauler.I have been productive, though: my cultists are done. Say hello to the friendly outreach team of the Church of the Fevered Dragon:I was inspired by the wickedly cool capirotes of the Brotherhood of St. Rochus in Spain (pictured below).I differentiated the colors of their hoods because it is more interesting and so they don't look overly-much like tiny little klansmen.I need to figure out how to make 28mm candle-staves. Link to comment https://bolterandchainsword.com/topic/346736-the-lost-and-the-damned-outpost/page/3/#findComment-5091755 Share on other sites More sharing options...
Dragonlover Posted May 27, 2018 Share Posted May 27, 2018 High Elf spears with the blades cut off? Dragonlover Link to comment https://bolterandchainsword.com/topic/346736-the-lost-and-the-damned-outpost/page/3/#findComment-5091789 Share on other sites More sharing options...
Azekai Posted May 27, 2018 Share Posted May 27, 2018 Interesting solution- perhaps if I took spears, removed the heads and replaced them with something like these?I may do that with my next squad; I have 10-20 more cultists I need to make at some point. Link to comment https://bolterandchainsword.com/topic/346736-the-lost-and-the-damned-outpost/page/3/#findComment-5092038 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.