sbarnby71 Posted December 11, 2018 Author Share Posted December 11, 2018 Tooled-up: Thunder-Hammer from the Deathwatch Kill-Team with wolf skulls added, swapped out the pommel for one from the SW Power Sword. Removed the halo/sun rays from the left elbow pad and left the skull intact. A few tokens and fetishes on the wolf pelt (sorry picture quality ain't so great from the back). Added a frag auto launcher from the Wulfen (not 100% sure on keeping that on or not, looks a bit too big, but might use a Wulfen backpack). Next will be finding the right head for him. mercbat 1 Back to top Link to comment https://bolterandchainsword.com/topic/351170-barners-sw-primaris-progress/page/2/#findComment-5212559 Share on other sites More sharing options...
sbarnby71 Posted December 12, 2018 Author Share Posted December 12, 2018 Decided on the head (Blood Angels, Don't know why but I keep getting drawn to these heads) and then I started to think a MASSIVE Hammer and Frag Launcher weren't enough, so started to cut down some Wulfen Frost Claws - not sure if they will stay: Shoulder pad is from the SW Upgrade pack, this might change this as it looks a bit too high command. Thanks for looking. Konnavaer and Svengir_Seastrider 2 Back to top Link to comment https://bolterandchainsword.com/topic/351170-barners-sw-primaris-progress/page/2/#findComment-5213454 Share on other sites More sharing options...
sbarnby71 Posted December 17, 2018 Author Share Posted December 17, 2018 (edited) Been wanting to make a ice spear or something similar for a while now and when I saw the new Haarken Worldclaimer I thought I'd get started. First I used the handle from the Heavy Thunder Hammer from the Death Watch Kill Team set and the flag pole from the old Chaos Warriors set: Bit of chopping and pining and then I was going to make a harpoon head to keep with the Fernis seafarers theme, but found this ice/stone sword from Spellcrow I had, so clipped the handle off to use the blade, then used the pommel to finish off the spear haft: Then posed this up with my Reiver Pack Master, it still needs to filling and the blade gluing in place as I want to get the angle of the head right once it's in the final position: It won't be used on this model, but I wanted to get an idea of the pose. Edited December 17, 2018 by sbarnby71 Nadir, Watcher, HvitrValdyr and 1 other 4 Back to top Link to comment https://bolterandchainsword.com/topic/351170-barners-sw-primaris-progress/page/2/#findComment-5217204 Share on other sites More sharing options...
Jarl Kjaran Coldheart Posted December 17, 2018 Share Posted December 17, 2018 I like that alot sbarnby71 1 Back to top Link to comment https://bolterandchainsword.com/topic/351170-barners-sw-primaris-progress/page/2/#findComment-5217356 Share on other sites More sharing options...
sbarnby71 Posted February 7, 2019 Author Share Posted February 7, 2019 (edited) My 2nd Lieutenant is almost done now, just need to add a bit of snow to the base and give it a matt coat to dull down the shine on the decals: Thanks for looking. Edited February 7, 2019 by sbarnby71 Konnavaer, Bjorn Firewalker and Cpt.Danjou 3 Back to top Link to comment https://bolterandchainsword.com/topic/351170-barners-sw-primaris-progress/page/2/#findComment-5250342 Share on other sites More sharing options...
Jackalwolf Posted February 7, 2019 Share Posted February 7, 2019 Nice! Really liking your conversions. sbarnby71 1 Back to top Link to comment https://bolterandchainsword.com/topic/351170-barners-sw-primaris-progress/page/2/#findComment-5250736 Share on other sites More sharing options...
Bjorn Firewalker Posted February 8, 2019 Share Posted February 8, 2019 Great job on the LT. sbarnby71 1 Back to top Link to comment https://bolterandchainsword.com/topic/351170-barners-sw-primaris-progress/page/2/#findComment-5250825 Share on other sites More sharing options...
PeteySödes Posted February 8, 2019 Share Posted February 8, 2019 Lookin' good! Cool idea for the subtle base too. Whats next on deck? Link to comment https://bolterandchainsword.com/topic/351170-barners-sw-primaris-progress/page/2/#findComment-5251628 Share on other sites More sharing options...
sbarnby71 Posted February 11, 2019 Author Share Posted February 11, 2019 Lookin' good! Cool idea for the subtle base too. Whats next on deck? Ah thanks man. I'd already painted the axe and thought it would look good to tie it in with the base as though the axe was made from the same rock and he was walking on Fenris or another outpost world of the wolves, so added the wolf head icon (it was going to be painted as though it was ice, but I went for the stone idea in the end). Next up I need to finish the other 2 Primaris guys from earlier in the thread (jump pack Haldor and the Reiver with the Heavy Thunder-Hammer). I'm trying to be more strict this year with my build it paint it, not just build it, paint it a bit and then build something else shiny. So far I'm sticking to it, but geez it's hard. Progress will be slow over the next month as I'm off to Japan this week for 3 weeks and then no doubt I will fill my suitcase with all kinds of weird models and robots and then I'll be hooked on Gundam robots and all my Wolves will have wings! PeteySödes 1 Back to top Link to comment https://bolterandchainsword.com/topic/351170-barners-sw-primaris-progress/page/2/#findComment-5253769 Share on other sites More sharing options...
sbarnby71 Posted March 7, 2019 Author Share Posted March 7, 2019 Quick update as I've not got much done over the past month due to my trip to Japan. Almost finished my 2nd Battle Leader - ended up with a slight bend in the arm holding the shield which is annoying but I'm hoping it won't look too odd: Still undecided on the head for this guy, playing around with Reiver heads and also working on a Reiver with a top-knot as an option. Watcher 1 Back to top Link to comment https://bolterandchainsword.com/topic/351170-barners-sw-primaris-progress/page/2/#findComment-5271550 Share on other sites More sharing options...
PeteySödes Posted March 7, 2019 Share Posted March 7, 2019 FWIW I don't see any awkwardness in the arms even having had you say something. I dig the red for the icon on the shield too. Im with you though where the reiver head needs......something. Topknot as you say or longer hair, I'm not sure. May fix itself though when the backpack goes on though. Good stuff my dude. sbarnby71 1 Back to top Link to comment https://bolterandchainsword.com/topic/351170-barners-sw-primaris-progress/page/2/#findComment-5271807 Share on other sites More sharing options...
sbarnby71 Posted March 8, 2019 Author Share Posted March 8, 2019 (edited) Tried out some different head options, first up was the Reiver with a topknot, then a Stormcast, Deathwatch SW, then a re-breather option. 2 Legio Custodes, etc Topknots were clipped off the Sisters of Silence models (see I'm inclusive ) Edited March 8, 2019 by sbarnby71 Watcher 1 Back to top Link to comment https://bolterandchainsword.com/topic/351170-barners-sw-primaris-progress/page/2/#findComment-5272327 Share on other sites More sharing options...
Rune Priest Jbickb Posted March 8, 2019 Share Posted March 8, 2019 I like 1 best personally. The motion seems to fit best with the model Link to comment https://bolterandchainsword.com/topic/351170-barners-sw-primaris-progress/page/2/#findComment-5272494 Share on other sites More sharing options...
Cpt.Danjou Posted March 8, 2019 Share Posted March 8, 2019 I like the second one with the top knot. Cpt. Danjou Link to comment https://bolterandchainsword.com/topic/351170-barners-sw-primaris-progress/page/2/#findComment-5272567 Share on other sites More sharing options...
PeteySödes Posted March 8, 2019 Share Posted March 8, 2019 To further complicate things i vote for the stormcast cast! Kassill 1 Back to top Link to comment https://bolterandchainsword.com/topic/351170-barners-sw-primaris-progress/page/2/#findComment-5272572 Share on other sites More sharing options...
Kassill Posted March 9, 2019 Share Posted March 9, 2019 To further complicate things i vote for the stormcast cast! ^what he said. Also wonderful work here brother, keep it up. sbarnby71 1 Back to top Link to comment https://bolterandchainsword.com/topic/351170-barners-sw-primaris-progress/page/2/#findComment-5272866 Share on other sites More sharing options...
spacepup Posted March 9, 2019 Share Posted March 9, 2019 Those look amazing. sbarnby71 1 Back to top Link to comment https://bolterandchainsword.com/topic/351170-barners-sw-primaris-progress/page/2/#findComment-5272872 Share on other sites More sharing options...
Wispy Posted March 9, 2019 Share Posted March 9, 2019 Stormcast Link to comment https://bolterandchainsword.com/topic/351170-barners-sw-primaris-progress/page/2/#findComment-5272873 Share on other sites More sharing options...
sbarnby71 Posted March 12, 2019 Author Share Posted March 12, 2019 (edited) I went with the Stormcast head... Hollowed out a SM helmet to get the collar needed and then added it, but I didn't dry fit the head in the collar (only without it) and you can see, the hair causes issue with the jump pack, so I can't angle the head in the right direction! So I went back to the Reiver head with the top-knot and once painted up I think it works. So here he is complete with base: Wanted a pose of him running into a jump/take-off Quick pic from behind: Edited March 12, 2019 by sbarnby71 Aothaine, TiguriusX, GrFlur and 4 others 7 Back to top Link to comment https://bolterandchainsword.com/topic/351170-barners-sw-primaris-progress/page/2/#findComment-5274921 Share on other sites More sharing options...
Bjorn Firewalker Posted March 12, 2019 Share Posted March 12, 2019 The Space Wolf is well-painted and posed. I don't think the shaved head with a topknot looks Fenrisian, though- that hairstyle looks Asian, i.e., more appropriate for a White Scar. Link to comment https://bolterandchainsword.com/topic/351170-barners-sw-primaris-progress/page/2/#findComment-5274976 Share on other sites More sharing options...
Kassill Posted March 12, 2019 Share Posted March 12, 2019 Shame about the stormcast head but that happens. Hopefully you can use it elsewhere. @Bjorn It's not "that" far fetched of an idea, but I see what you mean. A lot of the heresy era marines had them across multiple legions so I could see some still doing it. Plus it could always be something from his days as a fenrisian mortal, like a specific tribe that wore their hair like that to denote a certain position or place within the tribe. Or, rule of cool, and in this case, it looks cool sbarnby71 1 Back to top Link to comment https://bolterandchainsword.com/topic/351170-barners-sw-primaris-progress/page/2/#findComment-5275053 Share on other sites More sharing options...
Dantay VI Posted March 12, 2019 Share Posted March 12, 2019 I really like the custodes head... Primaries look ace. Link to comment https://bolterandchainsword.com/topic/351170-barners-sw-primaris-progress/page/2/#findComment-5275066 Share on other sites More sharing options...
sbarnby71 Posted March 13, 2019 Author Share Posted March 13, 2019 Thanks brothers, the head was a compromise (you can see I went through quite a few options), but I still feel it works, gives the aggressive nature I wanted here and top-knots are mentioned in pre-Hersey text of the Wolves and to me different tribes of Fenris would have different hair styles/clothing as an entire planet would not just produce identical looking faces and hair (unlike the Blood Angels). I have a 3rd Haldor model to work on soon, so maybe the Stormcast of Custodes head will make it on that one - I tend not to go for helmets. Kassill 1 Back to top Link to comment https://bolterandchainsword.com/topic/351170-barners-sw-primaris-progress/page/2/#findComment-5275471 Share on other sites More sharing options...
sbarnby71 Posted March 18, 2019 Author Share Posted March 18, 2019 (edited) Finished my Reiver Pack Master, so created a base for him, this was made using a mould from a Chess Piece my girlfriend has: Here he is painted up and based: Still undecided on giving him a Wulfen frost claw on his left hand, will see how he looks over the next few days on the shelf. Thanks for looking. Edited March 19, 2019 by sbarnby71 Watcher, Bjorn Firewalker and Konnavaer 3 Back to top Link to comment https://bolterandchainsword.com/topic/351170-barners-sw-primaris-progress/page/2/#findComment-5278445 Share on other sites More sharing options...
Bjorn Firewalker Posted March 18, 2019 Share Posted March 18, 2019 The thunder hammer wielder and his base look great! As for his left hand, frost claws will get in the way when he wields the hammer. Best give him a shield; or a pistol with a chain linking its butt to the Space Wolf's shoulder (see lanyards used with real world pistols for reference), so he can lay down suppressive fire as he charges forth to bring the enemy within reach of his hammer, the lanyard preventing him from losing the pistol when he releases it so he can wield the hammer with both hands. sbarnby71 1 Back to top Link to comment https://bolterandchainsword.com/topic/351170-barners-sw-primaris-progress/page/2/#findComment-5278822 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now