Reinhards Primaris Crusade

[Marshal Vespasian]

The work with the pinvice payed off. Gotta say. I drilled some holes into pauldrons this morning as well. Sadly not by choice. Hopefully with a Pin in and paint on it it will be hard to see.

[Mmmmm Napalm]

Great models! What paints did you use for the leather belts and pouches?

[vossyvo]

Inspirational stuff Reinhard.

 

I keep going back to look at your Redemptor, so sweet. If you sold all those additions on it as kit I would pay for it.

Know some are from the BT sprue, Did you mould others from Greenstuff? can see that you have the symbols on the shoulders nicely matching the curve. Fantastic.

[Marshal Reinhard]

Inspirational stuff Reinhard.

 

I keep going back to look at your Redemptor, so sweet. If you sold all those additions on it as kit I would pay for it.

Know some are from the BT sprue, Did you mould others from Greenstuff? can see that you have the symbols on the shoulders nicely matching the curve. Fantastic.

 

I comissioned another member on our forum, Eberious, to assemble and decorate a dreadnought after I saw what he'd done with his own. I only painted it. You can check out his thread, for a ton more inpsirational modeling, including my dreadnought and Emperor's champion before they were painted, as both were comissions he did for me. In the thread you'll see he uses a combination of plastic bits, greenstuff moulds, plasticard and more. 

 

Great models! What paints did you use for the leather belts and pouches?

 

The pouches are a simple rhinox hide base and doombull brown edges. Agrax shade too I believe. Some brighter pouches were done with mournfang as a base instead I think.

Edited August 26, 2019 by Reinhard

[Mmmmm Napalm]

 

 

Inspirational stuff Reinhard.

 

I keep going back to look at your Redemptor, so sweet. If you sold all those additions on it as kit I would pay for it.

Know some are from the BT sprue, Did you mould others from Greenstuff? can see that you have the symbols on the shoulders nicely matching the curve. Fantastic.

I comissioned another member on our forum, Eberious, to assemble and decorate a dreadnought after I saw what he'd done with his own. I only painted it. You can check out his thread, for a ton more inpsirational modeling, including my dreadnought and Emperor's champion before they were painted, as both were comissions he did for me. In the thread you'll see he uses a combination of plastic bits, greenstuff moulds, plasticard and more.

 

Great models! What paints did you use for the leather belts and pouches?

The pouches are a simple rhinox hide base and doombull brown edges. Agrax shade too I believe. Some brighter pouches were done with mournfang as a base instead I think.

Thank you!

[Marshal Reinhard]

So, a tiny update this time.

But I made a new chaplain:

Some might remember seeing the Chaplain during the ETL, which would be correct, allthough he had different head then:

Yeah, vastly prefer the new one. Also leaves me another head for another possible conversion...

[Sete]

Now that's a fine looking chaplain.

Can you tell me the bits you used?

Body is from the librarian obviously.

[painting.for.my.sanity]

Well, it looks like I might have to make a second chaplain inspired by yours.

 

Given my current one is based on a captain's body, it'll be quite funny - two chaplains for one crusade, neither based on the actual primaris chaplain model.

[Marshal Reinhard]

Now that's a fine looking chaplain.

Can you tell me the bits you used?

Body is from the librarian obviously.

Head is from the the dark vengeance chaplain, Absolvor bolt pistol is from the primaris apothecary, his right shoulder & the crozius is from the chaplain model that his old head came from. It's currently in a trio kit called Spacemarine heroes, which also has a captain model which is where the iron halo is from. Think that's it

[Marshal Reinhard]

So those who've followed this thread for any length or time, or indeed my old Templar crusade thread, would know that I'm pretty rarely, if ever, truly done with my models. While I keep changing small things at a time I rarely make an update for these small changes. I think enough changes has been done to my HQ models this time around that I'll allow myself to tout my own horn and bring attention to the fact.

Changes include repainting the weapons casing of everyone, I forget when, but i did take the decision a while ago that none of my black armored marines (ie everyone) should be holding black weapons. This is pretty much just ancient templar painting wisdom finally having taken hold with me. I've also tried to go over to doing metal power weapons with lightning effects, rather than the blue crystalline ones i've had previously. Put perhaps the most time consuming change has been to redo the black highlighting of the black armor (in no small part inspired by Darren Latham's tutorial on how to paint black space marine armor) But without further ado:

And I realize even this is still WIP, some of them needs more work.. I still have not really managed to do the front of primaris helms yet to a point that I'm satisfied with, besides perhaps the eyes. Also my two chaplains are nowhere to be seen because i still haven't figured out if I want to do their armor in the same style, or if they should have a neutral black tone rather than cold. Their's is a different black after all.

Edited September 27, 2019 by Reinhard

[Sete]

Sword bros looking good.

But I simply cannot do with a HQ without a tabard.

What chest did you use for the EC?

[Marshal Reinhard]

Eberious used the front half of a Repulsor techmarine gunner torso when he modeled the Champion for me. The idea to use that particular part is about the only thing I can take credit for when it comes to that. 

[Eberious]

Those HQ's are really standing out, good job Reinhard. The EC is looking rather good. ;)  

[Marshal Vespasian]

Those are gorgeous.

I need to watch darren lathams Video on that at some point. Even though I decided to hold off on painting any larger number of templars until the supplement drops

[Bjorn Firewalker]

Excellent work, Brother Reinhard. I'm glad you spared no effort in making your models look AWESOME.

[Link2edition]

I love your work. The EC in particular looks great.

[Marshal Reinhard]

Not getting our own new upgrade sprue means implementing the time honored tradition of making other chapters upgrade bits into our own, and as the Salamander sprue has some interesting ones, it was a only a matter of time until I did something like this:

Paint seems to have chipped a fair bit on his left foot as well as one of the knuckle skull. Easy fixes.

Highlights could probably be better too in places, but otherwise I'm pretty pleased.

[Gederas]

Pray, Kill, Burn!

I like it. Very clean painting as always Rein.

 

(that feeling when you hit "Submit post" far too early :lol:)

Edited November 6, 2019 by Gederas

[Marshal Vespasian]

That looks as great as I expected, cool model!

The paintjob is top notch as always.

[Sete]

Fantastic, unfortunately I dont share your enthusiasm to give GW money atm. But love the brazier.

Looking great.

Are you using the classic paints or the contrast?

[Marshal Reinhard]

I only own two contrasts, "Black Templar" and "Terradon Turqoise". Neither was used here

[JAG Templar]

Amazing! How many of those flaming braziers come with the Salamanders upgrade pack?

 

Great choice of bits for that guy and I feel like new sisters will also give us a new range of plastic gothic bits to work with.

[Sword Brother Adelard]

Has someone been watching the same Darren Latham video I just have perchance?

[BLACK BLΠFLY]

Red Templar is best Templar.

[Medjugorje]

Red Templar is best Templar.

just if its a black templar who slained so much heretics that his armor is full of heretic blood.