Loquille Posted March 19 Share Posted March 19 On 2/24/2024 at 5:28 PM, TheArtilleryman said: Nice work! It's only just dawned on me how similar Curze and Corax are. Just been reading Deliverance Lost and Corax is wrestling with exactly this - if he and Curze had been born on each other's worlds and had the opposite upbringing, would their paths have been the same? Gav Thorpe isn't the best writer ever but that's a nice bit of character development. Whoops, sorry meant to reply. I think they would have been similar, though I imagine both Legions would have remained closer to their pre primarch attitude. In regards to the Night Lords would still Judge and make examples of, just with less sadism. While I imagine with Corax is whether his sense of justice came from his mentor or was always within him. Would he have toppled the gangs, or would he have clawed his way to the top to rule? I managed to grab my box of Solar Saturday, so I've managed to complete the first five of the Las Section Cruor Vault, Pacific81, Hungry Nostraman Lizard and 7 others 5 5 Back to top Link to comment Share on other sites More sharing options...
Pearson73 Posted March 20 Share Posted March 20 Loving that blue metal @Loquille Great choice of colour scheme for the Butchers. The Ultramarines officers look smashing too! @Cruor Vault What a brilliant looking force! @AdamR AdamR and Loquille 1 1 Back to top Link to comment Share on other sites More sharing options...
Loquille Posted March 22 Share Posted March 22 The rest of the Section apparently wasn't far behind. I think I need to do a tank next. @Pearson73Thanks! tinpact, Hungry Nostraman Lizard, Agramar_The_Luna_Wolf and 4 others 5 2 Back to top Link to comment Share on other sites More sharing options...
Agramar_The_Luna_Wolf Posted March 23 Share Posted March 23 Trying to make this guy look sharp for my SoH... it was given to me painted and impossible to unglued the backpack. Sigh. Link to comment Share on other sites More sharing options...
TheArtilleryman Posted March 23 Share Posted March 23 (edited) 5 hours ago, Agramar_The_Luna_Wolf said: Trying to make this guy look sharp for my SoH... it was given to me painted and impossible to unglued the backpack. Sigh. Dunk it in some nail polish remover; that will take the paint off and should dissolve the glue as well. Only for metal minis of course … never do this for plastic… Edited March 23 by TheArtilleryman Link to comment Share on other sites More sharing options...
Cadmus Tyro Posted March 23 Share Posted March 23 10 hours ago, Agramar_The_Luna_Wolf said: Trying to make this guy look sharp for my SoH... it was given to me painted and impossible to unglued the backpack. Sigh. Stick it in the freezer, should break the superglue bond. Cadmus Noserenda, Pacific81 and Agramar_The_Luna_Wolf 1 1 1 Back to top Link to comment Share on other sites More sharing options...
Hungry Nostraman Lizard Posted March 23 Share Posted March 23 You know. The new mark 3 is beginning to grow on me. I'd love to see a more dynamically posed version of it, but I always prefer seeing marines "in motion". Here's my first completed mark 3, as a Night Lord despoiler. I used 3rd party arms for i t, they might be a touch oversized, but I don't think it's super noticeable. Thoughts? tinpact, Runefyre, Loquille and 4 others 4 3 Back to top Link to comment Share on other sites More sharing options...
Agramar_The_Luna_Wolf Posted March 23 Share Posted March 23 3 hours ago, Hungry Nostraman Lizard said: You know. The new mark 3 is beginning to grow on me. I'd love to see a more dynamically posed version of it, but I always prefer seeing marines "in motion". Here's my first completed mark 3, as a Night Lord despoiler. I used 3rd party arms for i t, they might be a touch oversized, but I don't think it's super noticeable. Thoughts? It's fine, more than fine. And the arms are great. Which company? Link to comment Share on other sites More sharing options...
TheFirstKnight Posted March 23 Share Posted March 23 (edited) Quick tester for my Prosperine Spireguard. Loving the new SA plastics. Edited March 23 by TheFirstKnight SkimaskMohawk, Loquille, Corswain and 5 others 8 Back to top Link to comment Share on other sites More sharing options...
sarabando Posted March 26 Share Posted March 26 yeah im starting another army sue me XD Agramar_The_Luna_Wolf, LameBeard and tinpact 1 2 Back to top Link to comment Share on other sites More sharing options...
Cruor Vault Posted March 26 Share Posted March 26 Finished chopping up some old eBay rescue Typhoons to make some Proteus Speeders for my XIIIth. This photo has been rattling around in my brain for MONTHS. The speeders have been sitting in a ziplock back in one of my many boxes of shame for years. With speeders being removed from 40k I almost threw them out, but then decided to give a shot at converting them into something more appropriate for Heresy. I trimmed down the airfoil, opened up the engine area, added two smaller thrusters on top along with a fin from a jetbike. I’ve never liked that the gunner was essentially firing a pintle mount, so I replaced his gun with a targeting computer and moved the main gun under the prow. Finally I removed the stanchon between the pilots and replaced them with the MKII crew from the vehicle sprue. TheArtilleryman, poom, Aspecti and 9 others 8 4 Back to top Link to comment Share on other sites More sharing options...
AdamR Posted March 27 Share Posted March 27 10 hours ago, Cruor Vault said: Finished chopping up some old eBay rescue Typhoons to make some Proteus Speeders for my XIIIth. This photo has been rattling around in my brain for MONTHS. The speeders have been sitting in a ziplock back in one of my many boxes of shame for years. With speeders being removed from 40k I almost threw them out, but then decided to give a shot at converting them into something more appropriate for Heresy. I trimmed down the airfoil, opened up the engine area, added two smaller thrusters on top along with a fin from a jetbike. I’ve never liked that the gunner was essentially firing a pintle mount, so I replaced his gun with a targeting computer and moved the main gun under the prow. Finally I removed the stanchon between the pilots and replaced them with the MKII crew from the vehicle sprue. I've got a load of old speeders lying around, I reckon I'll give something like this a try! Many thanks for the inspiration Cruor Vault and LameBeard 1 1 Back to top Link to comment Share on other sites More sharing options...
Dont-Be-Haten Posted March 28 Share Posted March 28 Adepticon was fun though exhausting. I'm just now recovering from it. tinpact and Agramar_The_Luna_Wolf 2 Back to top Link to comment Share on other sites More sharing options...
Agramar_The_Luna_Wolf Posted March 28 Share Posted March 28 (edited) My Chieftain Squad ready with 3D printed bits. I will change the fella with the banner as soon I get the new box of command squad Edited March 28 by Agramar_The_Luna_Wolf tinpact, Aspecti and LameBeard 3 Back to top Link to comment Share on other sites More sharing options...
sarabando Posted March 29 Share Posted March 29 got some termies printed for me Noserenda, Agramar_The_Luna_Wolf, tinpact and 1 other 4 Back to top Link to comment Share on other sites More sharing options...
Agramar_The_Luna_Wolf Posted March 30 Share Posted March 30 This past, night I assembled, finally my Recon/Seeker squad with the main options:bolter,nemesis bolter,shotgun,combi weapons and Seeker bolter(I mean,kraken bolter). I just take photos of the all options except combis and bolters...because I ran out of battery XD. And made,also, some changes with the unit's sarge and I think I have a quite acceptable Vigilator. Ah yes...and I assembled another apothecary. The MK IV helmet is provisional until I get a MK V General Zodd, tinpact, Loquille and 1 other 4 Back to top Link to comment Share on other sites More sharing options...
Pearson73 Posted April 1 Share Posted April 1 Pics from a ZM game yesterday against @Johanhgg. Played the mission from the Depths of Tredecimma exemplary battle. Had a lot of fun and it felt very thematic trying to push to the doors before the time ran out: The Praevian and his escort lead the force towards the end of the tunnel complex approaching the command hub. The shield wall of Immortals repulses the Red Butchers, before pushing on through the breach. Opening the blas door was the last mistake the Praevian would make. The tunnel of death earns its name. General Zodd, tinpact, LameBeard and 5 others 5 3 Back to top Link to comment Share on other sites More sharing options...
Corswain Posted April 1 Share Posted April 1 Very nice. I know it's not the star of the show but I really like that zone mortalis terrain too. Pearson73 and LameBeard 1 1 Back to top Link to comment Share on other sites More sharing options...
PalatineKnight92 Posted April 1 Share Posted April 1 On 3/29/2024 at 3:41 PM, sarabando said: got some termies printed for me Can you PM where you got those? or did you print them yourself? thanks in advance Link to comment Share on other sites More sharing options...
Pearson73 Posted April 2 Share Posted April 2 @Corswain Aye the terrain is brilliant, came pre-painted so you can just dive right into playing. Corswain 1 Back to top Link to comment Share on other sites More sharing options...
sarabando Posted April 3 Share Posted April 3 little progress on my first 5 SA allies for my blood angels. Agramar_The_Luna_Wolf, Corswain, tinpact and 3 others 6 Back to top Link to comment Share on other sites More sharing options...
AdamR Posted April 4 Share Posted April 4 Cataphractii Praetor WIP Felt like I needed some payback following a recent loss to my friends Iron Warriors! Really not happy with the white pteruges, so back to the drawing board for them! And I need to matt down the transfer on his cloak - which, contrary to how it looks in the pic, does actually go into the folds! General Zodd, LameBeard and Loquille 3 Back to top Link to comment Share on other sites More sharing options...
Cruor Vault Posted April 5 Share Posted April 5 (edited) Speeder #1 is done. I'll probably do the next three over the weekend. I was lazy and didn't strip the original paints, so these came out a little... softer looking than I'd prefer. but I dinged them up enough to obscure the worst of it I think. Edited April 5 by Cruor Vault AdamR, tinpact, SkimaskMohawk and 9 others 7 5 Back to top Link to comment Share on other sites More sharing options...
TheArtilleryman Posted April 5 Share Posted April 5 8 hours ago, Cruor Vault said: Speeder #1 is done. I'll probably do the next three over the weekend. I was lazy and didn't strip the original paints, so these came out a little... softer looking than I'd prefer. but I dinged them up enough to obscure the worst of it I think. Looks great! No “softness” visible at all. I think this looks better than the actual heresy speeders and you can’t even tell it’s a conversion. Excellent work. LameBeard 1 Back to top Link to comment Share on other sites More sharing options...
sarabando Posted April 5 Share Posted April 5 nearly finished on the first 5, lots of learning on how to improve the workflow. Wish i had some BA decals for them. I think il build the next 5 and the sentinel. SkimaskMohawk, tinpact, Hungry Nostraman Lizard and 5 others 6 2 Back to top Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now