New Chaos Traitor Guard and cultist army - Chaos Squats!

[Brother Morgan]

On 11/15/2022 at 5:59 PM, tychobi said:

Those breachers are so good.  Ace job sir

 

Thanks tychobi 

 

On 11/15/2022 at 6:03 PM, Rusted Boltgun said:

That Duelist is proper Chaos scary!

 

Thanks Rusted Boltgun 

 

Update time:

 

 

Here's a group shot of my completed Chaos Navy Breachers. I just have the Gheistskull to finish and my first 12 Breachers are completed. I chose clear bases so the fantastic Into the Dark cardboard floor tiles can be seen.

 

 

 

This is my Sergeant. He has a milliput body and legs (taken from a silicon putty mould) with a chainmail face-mask (taken from a silicon putty mould of a Warcry Chaos Legionnaire). To mix it up, I added a backpack spike taken from the Blooded kit and also I used a power axe instead of the usual power sword.

 

 

This is my Navis Surveyor. I added a Chaos Icon across his breastplate (taken from a mould from the FW Chaos Renegade kit) and some extra grenades to the stock model.

 

 

This is one of my Navis Armsmen. Again, I added a Chaos Icon across his breastplate (taken from a mould from the FW Chaos Renegade kit) and an Elucidian laspistol in holster (taken from a mould). I also added a spike to his left shoulder pad to show how Chaosified he is!

 

 

This is my first Navis Grenadier. He uses stock parts, but I again added a Chaos Icon across his chest and another hanging from his belt alongside a spike on his right shoulder pad. I used explosive limpet mines taken from the GSC range of kits and stuck one to the front of his flak/blast armour like the Claymore mines I've seen in Special Forces pictures.

 

 

This is my Navis Endurant. He has a head from a mould of the Traitor Commisar from the Blooded kit. I used a spike from a Blooded on his shield and a mould of the Chaos Icon from a old shield I have in my bitz box.

 

 

This is my second Navis Grenadier. He is a stock model with a Chaos Icon added to the front of his Flak/Blast armour, a spike to his right shoulder and another Chaos Icon dangling from his belt.

 

 

This is my Navis Hatchcutter. I gave him a longer chainfist by swopping an Horus Heresy Chainsword bayonet attachment for the smaller part from the kit. The usual Chaos Icon was used on his chest plate. I armed him with a Warcry/GSC knife and made a holster out of a mould and a small strip of plasticard.

 

 

This is my Navis Axejack. He is a stock model apart from the Chaos Icon chest plate and spike on his right shoulder. I painted the axe red, like he had just broken the glass case and taken out the emergency axe. As with all of the small axes all of my Breachers have, they have had congealed blood sponged onto the blades.

 

 

This is another Navis Armsman. I wanted to make a shooting a shotgun from the shoulder model, so used arms from the Blooded kit and carefully swopped the lasgun for the usual shotgun. Milliput chain mail was also added under his right shoulder pad. The legs were taken from a mould from one of the Blooded legs and added them to moulds of a Breachers boots. His belt buckle was replaced with a Chaos Icon and a spike was added to his right shoulder pad to finish.

 

 

This is another Navis Armsman but firing from the hip instead. The head and arms are from the kit, whilst the body, legs and boots are milliput moulds.

 

This is my Navis Void-Jammer. The head, body and arms are stock pieces. I swopped the legs with the DKoK kneeling ones and then removed the boots and puttees, replacing them with milliput moulds. I wanted a pose where he is close to the Gheistskull, programming in what actions he wants it to perform. The usual Chaos Icon chest plate was added. I only need to finish painting the Gheistskull but have been side tracked by making Navis Gunners (one for all of the heavy/support weapons - including a mini-gun borrowed from an Elucidian) and cleaning up all of the terrain pieces I have picked up on ebay,

 

 

And finally, this is another Navis Armsman but armed instead with a lasgun. The head and arms are from the Blooded kit, with the rest made from milliput moulds. 

I have bought myself an Elegoo Mars 2 Pro on Black Friday as an early  Christmas present. I'm spending a lot of the time at the moment watching youtube clips of all the do's and don'ts and need to pluck up the courage to start printing some Valour Korps riders, snipers and dead troopers. I'll let you know how I get on in the near future.

 

Any, questions, please feel free to ask as usual.

 

Regards, Phil. 
 

[Brother Morgan]

Hi everyone. It's been a long time since I posted but I bought myself a resin printer in the Black sales, joined a couple of Patreons and have printed off lots of models. I plan on showing some of these off in the near future, but I still have a back load of other GW models I finished. Without further ado ....

 

Chaos Duellist

 

This is a Warcry model with a SoB head and I think, a Dark Eldar fist spike.  I went with a simple white outfit, some blood and mud splatters.

 

Chaos 86th Gertcarth Royals Trooper

 

  

 

He has an old Empire Pistolier head with a Scion torso (with a milliput Chaos icon engraved), Imperial Guard arms, milliput legs and boots and a death rattle sabre. His spiked shoulder pads are made from a silicon mould. I went with royal colours of purple, yellow and gold.

 

Chaos Screaming Banshee Necromundan Ganger

 

 

This has Orlock legs with a torso from a mould from a Chaos Cultist. Esher arms and lasgun were matched with a SoB penitent head. I went with shocking pink as her gang colours.

 

Chaos Cultist

 

 

 

This has the legs from a Warcry model and resin arms and head from Anvil Industries and a bare torso from Mad Robot (I think). Milliput was used to fill and smooth the gaps between the different resin parts.

 

Chaos 57th DKoK Trooper

 

 

This has a torso, backpack and legs from a plastic DKoK guardsmen with an Anvil Industries Zombie head and arms. The weapon is taken from an old Dark Vengeance Chaos cultist. 

 

Chaos 3rd Thunderball UDT

 

 

 

This model is made extensively from milliput. I used an old IG Flamer tank for his oxygen tank with the hosepipe made from milliput and the GreenStuff Tentacle Maker. The speargun is made from a GSC shotgun with a spear (and spares attached to his leg) from an old Chaos Rhino accessory. I went with a James Bond Thunderball Orange for the wetsuit.

 

Chaos 29th Sherwoodian Fusilier

 

 

This has a Victorian Miniatures kilted legs with Anvil Industries Tricorn head, torso and arms. As usual, I added a Chaos Icon belt buckle to show his true allegiance. 

 

Chaos 36th Drookian Fenguard

 

 

This has some Victorian Miniatures kilted legs and torso, a GSC masked head and Anvil Industries arms and AK-47. 

 

Chaos 39th Linkoln Volunteers

 

 

This has an old Dark Vengeance Chaos Cultist legs with a bare chest with a Chaos Icon scar (taken from a mould) with Anvil Industries head and arms. He has a GSC shotgun to finish.

 

Chaos 3rd Wehrmacht Battalion

 

 

This has an Anvil Industries torso, an old Cadian pair of legs with boots taken from a Necromundan Orlock (from a mould). It has a DKoK grenade launcher and a resin skull gasmask from Bitzbox. 

 

Chaos Shaeburg Slaughterpriest

 

 

This is an old Dark Vengeance Chaos Cultist with a head swop, an old GW Chaos Warrior hammer and necromundan pistol.

and to show off one of the new 3D resin prints I've completed ....

 

Chaos Traitor 12th Falljaegar Trooper 

 

 

This Corrupted Guard is from Station Forge. I followed Sonic Sledgehammer from YouTube paint scheme and am really happy with the result. I've made about 30 Corrupted guard including Ogryns and have printed plenty of spare arms to make loads of different variations. 

 

Please feel free to ask any questions.

 

Regards, Phil.

[Grotsmasha]

I can't get enough of these, so creative and distinct. Please telle you these out on display somewhere.

[Brother Morgan]

23 hours ago, Grotsmasha said:

I can't get enough of these, so creative and distinct. Please telle you these out on display somewhere.

 

Thanks Grotsmasha but unfortunately, no.  After painting and having their photo's taken, they get placed into computer keyboard boxes and either stored under my bed or in our Utility room 

 

Just to finish off all of my converted models before I start showing off my completed 3D printed models ..........

 

Penal Squad 2

 

 

 

 

 

 

 

 

 

and my final Penal Trooper who has been killed ...

 

 

and here are my last 2 GW models I painted last year ....

 

Necromundan Dockers

 

 

This model has an Anvil Industries head and Goliath body. 

 

 

and finally, another new 3D print I've finished ...

 

 

This is my Chaos Traitor Crimson Ravager Commissar standing on an injured Valour Korps Trooper (from The Makers Cult). He is a free STL from Redmakers called "Renegade Death Division - Commissar - Heretics". I liked it so much, I ended up buying the STL's for Renegade Death Division Heretic - Commander, Command Squad, Death Squad, Heavy Weapons, Pack of Abhuman Giants and Legendary Battle Tank. I have printed off lots of these multi part models including mirrored arms and bodies (instantly doubling the number of different poses available!) and have slowly been batch painting around 50 troopers. I'll start showing some of these in the next few days.

 

As usual, feel free to ask any questions.

 

Regards, Phil.
 

 

[Brother Morgan]

The Fallen 12th Falljaegar Regiment

 

 

These Corrupted Guard are from Stationforge. The arms are printed separately so allowing a multitude of different poses. I love the pose of this one. To go with the muddy bases, I sponged on some "dry" mud and then some "wet" mud over the lower parts to give him a grimy feel. Blood was sponged onto the bayonet for a well worn look.

 

 

This fallen Falljaegar has lots of hands modelled on his belt - probably chopped off with his chain-axe!!

 

 

I loved this one's ear collection - very Dolph Lundgren from Universal Soldier

 

 

This one has an amazing Chainsaw

 

 

This officer has such a great face. I had fun painting this one.

 

And to finish off this update.....

 

 

I'm really proud of the paint job I did on this renegade Ogryn. I think the edge highlighting really makes this one pop.

 

Feel free to ask any questions as usual.

 

Regards, Phil.

[Firedrake Cordova]

This looks like a very fun project! I definitely approve!  

[Grotsmasha]

On 5/25/2023 at 2:01 AM, Brother Morgan said:

This officer has such a great face. I had fun painting this one.

 

Is anyone else seeing Red Skull here?

[Brother Morgan]

On 5/25/2023 at 8:14 AM, Firedrake Cordova said:

This looks like a very fun project! I definitely approve!  

 

Thanks Firedrake Cordova 

 

On 5/25/2023 at 11:32 PM, Grotsmasha said:

 

Is anyone else seeing Red Skull here?

 

Definitely 

 

Update time:

 

Chaos Traitor 12th Falljaegar

 

 

This is a Grenadier. I really like the pose on this one and am really happy with how the eye lenses turned out.

 

 

This is a fallen officer. 

 

 

Bane and Blood for the Blood God........

 

 

StationForge really make some nice sculpts. I love the chopped off hands on his belt.

 

 

I love this fella's shield!!

 

 

Who needs lasguns when you have knives!!

 

And finally...

 

 

I can't remember who created the STL for this medic. I saw it on Cults3D/Myminifactory and knew I had to have it. I think the blood on his cleaver looks really cool.

 

Please feel free to ask any questions.

 

Regards, Phil.

[Brother Morgan]

Apologies for not updating this thread for a while. I was in a big painting phase and home life has had an impact on me wanting to update it. As I'm in a better place, let's show you some more models I've finished:

 

 

This Chaos Traitor 12th Fallsjaegar Vox-caster is from the Stationforge Corrupted Guard range with RedMakers Renegade arms added to throw in a bit of variety.

 

 

Here is the 12th Fallsjeagar Medic

 

 

Here's a grenade launcher .....

 

 

and another 12th Fallsjaegar trooper.

 

To finish off this update, I give you my 2nd Corrupted Ogryn (from Stationforge):

 

 

I think Father Nurgle has given him some gifts!!!

 

Till next time.

 

Regards, Phil.

[ZeroWolf]

Great work here 

[Brother Morgan]

On 8/4/2023 at 2:15 PM, ZeroWolf said:

Great work here 

 

Thanks ZeroWolf 

 

Update time:

 

 

This is my 21st Solar Army trooper. I bought him on ebay and made the minor conversion of adding a chaos icon to his breastplate. Although the photo doesn't show it, the armour had multiple coats of pearlescent blue to make it shine.

 

 

Here's even more heresy - Fallen Tanith!!! I bought these three via bits sites and ebay.

 

 

I added chaos icons dangling from their belts to show they have fallen from the false Emperor's light.

 

 

These are Chaos Enforcers from the Lunar Auxilia range from The Makers Cult.

 

 

I sponged on rust to their armour and mud splatter across their boots and legs.

 

And finally ....

 

 

This is a resin 3D print - unfortunately, I cannot remember where I got it from. I painted his skin to give him a sickly zombie like feel.

 

Till next time, Phil. 

 

[Brother Morgan]

Update time:

 

Chaos Traitor 113th Crimsburg Stalwarts

 

 

This is one of the last plastic Chaos Traitor Guard I made before I started making 3D resin prints. He is made from "The Blooded" Kill Team with a milliput recast of the Traitor Commisar's head.

 

Chaos Traitor 67th Flaxian Foot Soldier

 

 

This traitor is again made from parts from "The Blooded" Kill Team with legs from the Chaos Legionnaire from Warcry. 

 

Chaos Traitor 13th Pluvian Rifles Trooper

 

 

This Traitor has a body and legs from the Chaos Legionnaire Warcry band with arms and head from "The Blooded".

 

Chaos Traitor 43rd Royal Tanburm Trooper

 

 

This Traitor has legs from the Chaos Legionnaire Warcry band with arms, torso and head from "The Blooded".

 

Chaos Traitor 33rd Valhalian Veterans

 

 

This Traitor started life as a Dwarf Beserker from Bloodbowl. I swopped his hands for an axe and pistol to make him fit the 40k universe.

 

Chaos Cultist 23rd Norska Berzerker

 

 

Same as the previous Traitor, he started life as a Dwarf Beserker from Bloodbowl. I swopped his hands for an axe and pistol to make him fit the 40k universe.

 

Feel free to ask any questions as always. 

 

Regards, Phil.

[Firedrake Cordova]

I really like the level of creativity that's going into this project