Jump to content

Recommended Posts

Not much of an update, but got most of the work done for the top carapace and doc oc headtacles

 

Still need to add more chaosy things on top but somewhat undecided at the moment

20230626_202431.jpg

On 6/27/2023 at 10:12 AM, gaurdian31 said:

2 more tentacles! Go full Doc Oc!

I've only got one more though :cry:

 

Been a very, very slow week. Having to travel overnight now each week for work, so slowing me down a good bit. Managed to get an hour or so in tonight, so started on armor plates and weapons. Thinking that I'll finish the legs first, since I've still got to get the other gatling and battle cannon put together

PSX_20230702_214824.jpg

  • 2 weeks later...

Been a super busy first half of July with RL obligations and travel meaning I didn't have much paint time. 

 

Finally sat down tonight and cranked on the Despoiler, glopping on the base edge so that in the morning I'd only have to do decals, damage, weathering, basing, varnish and all done. 20230715_232130.thumb.jpg.c5057d7141083d2a6b296cc20ed40c41.jpg

 

 

Then, when i was happily putting paints back on the rack, i saw it. And i was sad.20230715_233653.thumb.jpg.78d62459c342e525b9d512c6f90164bc.jpg

 

Havoc missile pod, not even based yet. Nooooooo!

 

Still that shouldn't take TOO long so I'm still optimistic about finishing tomorrow, but we'll see. 

 

20 hours ago, Firedrake Cordova said:

isn't treachery to be expected from them? :tongue: 

It's still rude of them lol

 

I was able to finish up the missile pod and the decals in about 4 hours today. Finishing touches tomorrow! I don't want to spoil the look, so in the meantime here's my thoughts on the towering mechanic: Screenshot_20230717_004935_SamsungNotes.thumb.jpg.9dcdbff5df59f08833a57a7cbfab71d4.jpg

Definitely a mad dash the last two days to get him finished. Halfway through the month and I still need to finish a Lancer and a War Dog. Aaaaahhhhh

 

 

20230717_222215.jpg

 

This is a fun comparison of just before going into decals+weathering and after. Probably five hours from start to finish for that part. Rest of the photos in the spoiler!

PSX_20230717_233749.thumb.jpg.75ddded6bfc96f671e23650f029588db.jpg

Spoiler

20230717_222307.thumb.jpg.b5e8a847226b55421caa422b8a9c4d25.jpg20230717_222247.thumb.jpg.2a6eb04a56fc047401882dad92d2f392.jpg20230717_222345.thumb.jpg.eea37501faa7311b4c0e0a2c227470a8.jpg

 

Edited by Boc

Primed and ready to go!

 

Trying to work on my airbrush technique and I'd found a video where they used a gray to white gradient and applied contrasts over it, rather than preshade deep black to bright white.

 

20230724_194849.thumb.jpg.65674dcfa42e635856b762659f1eb38c.jpg

 

Of course I painted the red THEN the white...so if got to figure out how the heck to fix the white overspray lol

 

20230724_202535.thumb.jpg.0d14613ef018968145ed975f1a77a092.jpg

 

Now as I've said, I'm colorblind. So I stick to a pretty scripted "these are what I've used, so I will continue to use only these," which of course now I've broken. So need some feedback, is this red above close to these reds? I still need to apply Reikland wash to the Lancer, but am not sure if the color is close enough or if I need to start over with the top.

Screenshot_20230724_204019_Gallery.thumb.jpg.c0132249b379885a78c378cbdf6f06aa.jpgScreenshot_20230724_204041_Gallery.thumb.jpg.789105d6c3101600ef63ea9891e1bb10.jpg

 

Also some other stuff with some work on it

 

20230724_202545.thumb.jpg.c198513cd4a016246d8346e35d063f3d.jpg

You're definitely making good progress, churning through those stompy robots :smile: 

 

As to the colours, the red on the previous models looks "purer" (basically, a middle-bright red, if that makes sense), whereas the one you've just painted looks like it's leaning a bit more to the rust (brown) side of the red spectrum. Of course, lighting and white balance can play tricks, so ... do you have an image with both of them next to each other?

A little bit more work done. Tried touching up the white overspray on the top with...middling results. Need to dry brush the screaming skull of the Dark Mechanicum icon and the exhaust stacks, then paint the access door and panels green.

20230727_203245.thumb.jpg.eaad69d6af29453a85c65a6157bc2373.jpg

 

Starting to finish the basic steps and apply armor panels. The legs themselves are done except for weathering, just need the armor plates down here finished.

 

20230727_203235.thumb.jpg.cdcb92abcb4508cc5ad1aee205344aeb.jpg

 

Lastly, completely finished up the lance! Opted for a brass handle and silver tip, with frost contrast to give it a bit of a power weapon effect. Pretty happy how it turned out.

 

20230727_203317.thumb.jpg.043d05a5665fada22c198f41794151ed.jpg

 

That's it for now! Elriks Hobbies just picked up the old Secret Weapons IP this week, so I've excitedly placed an order for huge skull bases. Super pumped, no more goop walls!

Shield is all finished up, and my trusty assistant is holding it in place while the glue dries

20230730_202500.thumb.jpg.2c0f912ad999f32101e1b84774f03fee.jpg

 

I THINK that was the last of the painting left to do on him. I may need to color the dot in the middle of the shield but we'll see.

 

Gloss varnish is already applied on the places I'll be putting decals, so tomorrow night should be able to crank out a lot as long as I get out of work at a decent hour.

 

Definitely not getting to the Tyrant this month :facepalm:

9 hours ago, Grotsmasha said:

This thing has been a god-send for assembling anything that requires super glue,

 

image.thumb.png.08710a4e5e5fb346be8c2597b85b9843.png


+1 on this thing. If they ever sell the arms separately I'd buy several more. It is awesome for holding things together for gluing or even for just for holding smaller sub assemblies when painting (particularly with contrast paints/shades where you want things to flow in the same directions with gravity)

 

 

Love the knights. 

Had to call in to work today so I made the most of it and finished up my Lancer! The model is huge, so pretty much impossible to get into a decent photo since my photo setup is super ghetto. Very happy how he turned out

20230731_180907.jpg

20230731_181031.jpg

First off, one of the better local painters has been pushing me to start using enamels and oil washes. Finally bit three bullet today and tried out AKs grime line. I've had this Centurion/Sergeant sitting around for about a decade waiting to get based, so I figured it'd be a good guinea pig. Here's the progression: 

 

20230806_191710.thumb.jpg.dd0b93f2a7dd0ea8d5366a4665ce4235.jpg20230806_192254.thumb.jpg.a3678951900498f7aeb55ec34f59dace.jpg20230806_203509.thumb.jpg.f2e374ce6609d8736426d309300f58ac.jpg

 

Probably should've diluted it some rather than straight out of the bottle lol. I applied the enamel, waited about 90 minutes, then got to cleaning him up. Happy enough with how it's made him dirtier, but all I had were a microfiber cloth for cleaning glasses and q tips, so the nooks and crannies were really hard to get to. Ah well. 

 

Got a little big of work done on the Stalker for the Call to Arms. All of the silvers and golds done. Tomorrow I think will be red trim, then dry brushing and initial washes.

 

20230806_201313.jpg

Got the decals and some battle damage done on the Stalker.20230807_200014.thumb.jpg.d53ade946e89b8b55efb80a179645a22.jpg

 

He's got a shiny varnish on for a reason too... tomorrow the top half is going to get absolutely dunked in grime wash. Because why not? He looks too clean. 

And the Stalker is all done and I'm officially in love with enamel grime washes from AK.

 

Here's the progression photos of the finishing touches

 

Top left, decals and damage all done, gloss varnish applied 

Top right, somewhat liberal application of grime wash. Tastefully applied, I swear I didn't dunk it

Bottom left, enamel cleaned off after ~2 hours to dry

Bottom right, based and matte varnish

 

PSX_20230809_192116.thumb.jpg.3b7912b3febad13eb466f3c79b711501.jpg

 

Total actual work from top left to bottom right... maybe an hour? If that? Hardest part was cleaning off with a microfiber cloth that kept getting snagged on the spikey stuff. 

 

Really happy with what I think is high impact low effort. Because I'm lazy. 

 

More pics of the Stalker in the spoiler section below 

 

Spoiler

20230809_183154.thumb.jpg.80b4c3140dc2ccb545064b796efce400.jpg20230809_183207.thumb.jpg.7dfeb493500abe6b3070af392f704cab.jpg20230809_183219.thumb.jpg.767ed30cd255a325112b34e75f421b9b.jpg

 

Thanks for the feedback! 

 

I procrastinated moving my hobby stuff out of the soon to be new baby's room, so got the first couple hours to work on the Tyrant. Primed everything, put on base layers, and then was a bit too sloppy with the contrast paints. I'll spot fix those later, too lazy now. 

 

It's still not glued together at all expect for the top frame and legs, but I used blue tac to hold it together to see how it was coming. 

 

 

20230812_234303.jpg

As I think I mentioned, I had to get a new display cabinet since the one I had opens on the side and where the new place for it is I needed one that opens from the front. 

 

Finally got it moved today and set up, so here are the first full Sons of Horus CSM/CK warband photos. Only 3 legionaries missing since their arms broke off while moving them.

 

Had to replace some arms on the war dogs, once I finish the painting set up in the basement work space I'll get them touched back up.

20230820_192041.jpg

20230820_192128.jpg

20230820_192137.jpg

Edited by Boc

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.