Jump to content

WIP thread - 711th CCAB (Chocochip Rats)


elmo

Recommended Posts

As already hinted at in the Campaign: Assault on Lutum thread my next infantry squad is complete and will be joining the 1st Platoon, 897th Infantry Company "Cadian Might", 711th CCAB.

Squad #112

gallery_62353_10396_71470.jpg

Along side them will be their transport - Chimera hull no. 190 and a second Chimera I am also working on at the moment as it takes only a little more time to do 2 together as 1 on its own. Both are at about 80% with detailing to be completed along with shading and inking then weathering. Should be another couple of evenings work then I can finish of the Vanquisher turret.

gallery_62353_11005_32789.jpg

gallery_62353_11005_108524.jpg

The 711th march proudly onwards for The Emperor!

Link to comment
Share on other sites

I have just been giving the squad numbering some thought. At the moment I have been simply using the numbers on the decal sheet but I am about to run out so I created 112 by cutting 2 different numbers and rejoining them however I need a plan.

 

My idea is as follows:

 

Company Command 001

 

First platoon

Command  101

1st Squad  111

2nd Squad 112

3rd Squad  113

4th Squad  114

etc

 

 

HWT 1    121

HWT 2    122

etc

 

Special weapons

Squad 1   1:HQ: 1

Squad 1   1:HQ: 2

 

2nd Platoon (pattern repeats)

Command  201

1st Squad  211

2nd Squad 212

3rd Squad  213

4th Squad  214

etc

 

 

HWT 1    221

HWT 2    222

etc

 

Special weapons 

Squad 1   2:HQ: 1

Squad 1   2:HQ: 2

 

3rd, 4th etc platoons carrying on the pattern

 

 

 

Vehicles slightly different

 

975th Armoured Battalion "Iron Fists"

Command vehicle 001

 

1st Squadron

Lead        111

2nd tank   112

3rd tank    113

 

2nd Squadron follows on the pattern

 

 

Am I being a little overzealous?

What do you guys think?

 

On the plus side it does give loads of room for expansion ;)

Link to comment
Share on other sites

The Armoured Fist is complete along with the second Chimera and a Vanquisher turret. I have been quite productive this month. Shame I am away for the first 2 weeks of Feb :(

gallery_62353_10396_121515.jpg

gallery_62353_10396_58054.jpg

http://orig00.deviantart.net/c2f7/f/2016/029/0/b/chimera__190_by_elmo9141-d9pqq8p.jpg

http://orig00.deviantart.net/a1ac/f/2016/029/3/b/chimera__128_by_elmo9141-d9pqq5i.jpg

I have assembled 11 3rd party tripods ready for some HW work plus the Ogre to Bullgryn conversions and a big box of Russes....

What to do next :(

Link to comment
Share on other sites

Bggr! :censored:

 

Just cut the helmeted heads off the Kasrkin for Assault on Lutum and found out the beret heads from a 3rd party company I had already bought just for this project are slightly too small scaled to look right :blush.:

 

Ebay order placed for some Scion heads... Hurrying up and waiting.

Link to comment
Share on other sites

  • 3 weeks later...

So the Kasrkin are beginning to look like something now with all the main colours blocked in.

The heads where carefully snipped off then the necks hollowed out using a dremmel tool to fit the Scion beret heads. I have also altered one of the backpacks into a vox as the tiny antenna had snapped off and used one of the Cadian Sgt heads as it has a microphone and headset.

gallery_62353_11005_89405.jpg

Still to do is the black ink, chocochip, armour cam, highlighting, detailing and basing by the end of the month....

Just to remind you how they should end up.

gallery_62353_10396_14323.jpg

Edited by elmo
Computer hickup
Link to comment
Share on other sites

Next up will be some armour as it has been a little while since I added any Russes to the 711th.

I managed to get my hands on an old style LR hull sprue and added this to some current sides with a little tapping from a large mallet it all fitted together. At the moment I am converting the turret into a Vanquisher a la plastic pipe.

One thing I did not notice is that there is no turret base on the sprue so time to botch one out of plasticard. Also parts of the sponsons are not on this sprue but I am not really to concerned as I won't be using them on this model although I am magnetising the sides just in case I change my mind later.

http://i.ebayimg.com/00/s/MTIwMFgxNjAw/z/~GoAAOSwKtlWo9z6/$_57.JPG

Here is what I have so far with the turret - needs tidying up but not a bad start ;)

gallery_62353_11005_859.jpg

gallery_62353_11005_68305.jpg

gallery_62353_11005_46779.jpg

gallery_62353_11005_22649.jpg

Link to comment
Share on other sites

Work is progressing well with the Leman Russes.

The 2 Demolishers are magnetised to also allow them to be used as Punisher or Executioner variants and the mix of the old style hull with new sides has been successful but extra bits had to be added to replace missing parts from the old kit.

They will be primed this weekend then paint will be slapped on with a planned completion date of 18 March.... Hopefully ;)

gallery_62353_11005_31202.jpg

gallery_62353_11005_159374.jpg

Link to comment
Share on other sites

Base sprayed last night in Chaos Black then Tamiya T61 Nato Green.

Next comes the desert sponging then the detailing... about 2 weeks worth :(

I always paint the tracks separately from the hulls - just the way I prefer it ;)

Executioner as example only - it will be a Demolisher for the AoL campaign

Checking through my collection and still 4 LRBTs and 2 Wyvern/Hydras to do plus loads of troops....

gallery_62353_11005_57493.jpg

gallery_62353_11005_15920.jpg

gallery_62353_11005_65034.jpg

gallery_62353_11005_151341.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.