=][= REQUEST TUTORIALS HERE =][=

[Jolemai]

Hi folks. Could someone be kind enough to point me in the right direction of a thread that details how to fit FW arms onto the B&C Contemptor Dreadnought please?

 

Thanks in advance.

[Grotsmasha]

To clarif: You to fit FW Contemptor arm options onto a B@C Dread?

 

If that is what you're after, I'll through up some......hangonaminute.....I think I can get some quicker than that...

 

Here we go: http://www.bolterandchainsword.com/topic/317799-365-days-of-hobbyhopefully/page-2

Edited May 21, 2016 by Grotsmasha

[Jolemai]

So basically I should get the FW arms I want to use a template and then hack the BaC Contemptor appropriately and magnetise? Did you sink the magnets?

[Grotsmasha]

Yep, pretty much. There was no need to sink the magnets on the B@C models as the gaps/ledges had the correct clearance, you'll only need to drill the FW arms.

I'll take some more pics of exactly where I cut the B@C shoulders, besides drilling you don't need to modify the FW arms at all.

 

Cheers, 

Jono

[Nrakmm]

Tutorial Request:

Type: Modelling

Race: Heresy-era Space Marines: Alpha Legion

Details: I m looking for a tutorial on how to make Exodus's helmet.

 

Thank you for your help.

[Grotsmasha]

Tutorial Request:

Type: Modelling

Race: Heresy-era Space Marines: Alpha Legion

Details: I m looking for a tutorial on how to make Exodus's helmet.

Thank you for your help.

Remind me again of what it's supposed to look like?

Nevermind, found it,

Edited September 5, 2016 by Grotsmasha

[Jolemai]

Tutorial Request:

Type: Modelling/Magnetisation
Race: Blood Angels/codex Space Marines/Grey Knights
Details: Could someone point me in the right direction for a tutorial on magnetising the weapons on a Stormraven Gunship please? Having painted the interior, I'm after something in particular that wont block off the side doors (i.e I can switch between the hurricane bolters, doors and still see inside if they are removed)

 

Cheers.

Edited September 21, 2016 by Jolemai

[Dosjetka]

I'm planning on doing all of the symbols shown above. They won't be exact copies (extremely difficult when freehand painting) but should do the trick and be recognisable on your models.

Long overdue but I've still got this on my to-do list so it should happen soon-ish.

[Cajus]

Hello

 

I was wondering if someone could point me out to a good mold tutorial and what materials are best used to duplicate a specifiek chaos marine backpack.

 

Thanks in advance

[Carlson793]

Hello

 

I was wondering if someone could point me out to a good mold tutorial and what materials are best used to duplicate a specifiek chaos marine backpack.

 

Thanks in advance

http://www.bolterandchainsword.com/topic/324547-copying-beaky-heads-using-a-hybrid-1-2-piece-mold/

[Cajus]

Thnx forgot about that one

[Sume]

Tutorial Request:
Type: Painting
Race: Sisters of Battle
Details: I am looking to paint my tank chassis primarily in black.  I dont have access to an airbrush and my attempts so far have turned out poor.  

Thank you for your help. 

[Unholyechoes]

Tutorial Request:

Type: Modelling

Race: KDK

Details: I want to put the GW Daemon Prince wings on the FW Daemon Prince of Khorne.

[Bythehololight]

Tutorial - preparing forgeworld resin

 

 

Heya peeps, I have recently collected my forgeworld order, first in many years I have made a lightning fighter many years ago from forge world.

 

I have put the new order through the dishwasher wrapped in socks. Also then going over them with cold water and a toothbrush.

None of the pieces are glueing together. I bought a thin glue form a hobby store, and also tried a cheap and nasty one from the local convienence store. No luck.

 

I have left 5 assault marines in some dishwasher liquid and water solution in a bowl over night. I'm hoping this may help.

 

Any advice?

Is it possible I have a 'bad batch of resin'. I have heard that being referenced. If I did have a bad batch how would I tell?

[BedTimeBeer]

Hey Everyone,

This would be a pretty basic tutorial but i wasn't able to find adequate ones:

Ultramarines regular/venerable Dreadnought!

All the videos I've found are rather short or fast and don't go much into detail (or aren't for the Ultramarines chapter).

As a newbie, it would help out a lot to find a detailed step by step tutorial for doing this.

Thanks!

[Brother Nihm]

Tutorial - preparing forgeworld resin

 

 

Heya peeps, I have recently collected my forgeworld order, first in many years I have made a lightning fighter many years ago from forge world.

 

I have put the new order through the dishwasher wrapped in socks. Also then going over them with cold water and a toothbrush.

None of the pieces are glueing together. I bought a thin glue form a hobby store, and also tried a cheap and nasty one from the local convienence store. No luck.

 

I have left 5 assault marines in some dishwasher liquid and water solution in a bowl over night. I'm hoping this may help.

 

Any advice?

Is it possible I have a 'bad batch of resin'. I have heard that being referenced. If I did have a bad batch how would I tell?

 

Just checking, you aren't using plastic glue are you?

Because with FW's resin you need to use Superglue.

[Cryptix]

Tutorial Request

Type: Modeling/Sculpting

Race: Any

Request: Scratchbuilding a model using plumber's putty. What kind of tools, process, useful tips and warnings, etc. Particularly trying to learn to sculpt nurglings.

[Brother-Chaplain Kage]

For sculpting a model from scratch, you'd find a lot more searching the internet for tutorials than waiting for something to show up here. I can't even remember the last time I saw someone who wasn't professional level sculpting an entire 40k figure from scratch.

[MikhalLeNoir]

You could ask "the traitor". He recently made a full sculpt daemon prince. He detailed the process with enough pics so you may be able to get something out of it.

[DistroyA]

Hey guys. I'm wondering if anyone could point me in the direction of a tutorial in making sonic weapons for noise marines.

 

I've scouted the forums as well as Google to no avail. If there is a tutorial that exists, I'd be eternally grateful if someone could link me. If not, could someone possibly create a guide at all? I'm stumped as to how to go about starting in the sculpting/conversion process, as well as what materials I might need other than green stuff and milliput.

 

Thanks in advance. :)

[Brother-Chaplain Kage]

Was there something specific you're looking for in the way of sonic weapons? Copies of the GW stuff, for example? Also, do you have a tube making tool? If not, you'll definitely want to get one when you can because 1) they easily make awesome, professional looking tubing, and 2) Noise Marines kinda have a thing with tubing and power cables.

Edited May 4, 2017 by Brother Chaplain Kage

[DistroyA]

Yeah, basically a method of making replicas or similar of the GW originals.

 

Aye, I believe I picked up a tentacle maker for that specific purpose. Lol

[DaBoiKyknos]

Not totally sure, if this had been brought up yet (search function said no, if I used it correctly), but could one explain the purpose and use

of Liquid Green Stuff. I bought a pot and not sure, if I really got it.

[Grotsmasha]

It's for filling smaller gaps and joins. Predominantly used with metal and resin models as they're "fit" was less likely to be as snug and plastic models.

[malika666]

Tutorial Request: Making your own transfers

Type: Other

Race: All

Details: What are your experiences with making your own transfers? Has anybody here done that? Been pondering about designing some transfers, but have no idea on how to make them.