thewarriorhunter Posted October 16, 2018 Share Posted October 16, 2018 Need more pictures of the heretic who's lying on his back! Vykes 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/290/#findComment-5174587 Share on other sites More sharing options...
Vykes Posted October 16, 2018 Share Posted October 16, 2018 Can't say no -laughs- always fun to use spare bits from... I wanna say a Xiphon pilot, plastic mk. IV limbs, and spare resin torso and head from after tossing in some upgrades. Man, I gotta see if I still got some more for my 16th and 9th boys. BitsHammer and thewarriorhunter 2 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/290/#findComment-5174592 Share on other sites More sharing options...
KaosRaptor Posted October 16, 2018 Share Posted October 16, 2018 (edited) TiTH I finished the 10 Tzaangor that have been sitting on my desk for what feels like forever - hooray! Â Next up, throwing a box of CSM and Raptors together and seeing what happens! Edited October 16, 2018 by KaosRaptor Semper Fortis 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/290/#findComment-5174600 Share on other sites More sharing options...
BitsHammer Posted October 16, 2018 Share Posted October 16, 2018 That makes for a nice diorama piece, or objective marker! Â TITH...I ran out of primer. I need to pick some up more this week, and I'm likely to pick up some grey as well to let me do the Goliaths with less effort since I'm following a scheme pretty close to GW's (subbing out the red markings for Jokaero Orange to match the robe/tabard colors I'm using). Vykes 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/290/#findComment-5174601 Share on other sites More sharing options...
Laughingman Posted October 16, 2018 Share Posted October 16, 2018 I did a test model for a allied solar auxilia force  fluff wise his cohort (the 205th) is from Mercury, thus the moniker "the children of Hermes"  Semper Fortis, Vykes and BitsHammer 3 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/290/#findComment-5174655 Share on other sites More sharing options...
Viridia Posted October 16, 2018 Share Posted October 16, 2018 TITHI based a couple of recon soldiers I ordered as part of the drive from Anvil Industries last year. I'm determined to make them into a generic sci-fi army for me to use for other games, but looking at these snipers is making me ever so slightly want to proxy either Alpha Legion or Raven Guard, neither legion being one I've ever even considered. Â Also looking at finally building my 40k Roboute Guilliman, but taking off most of the filigree and giving him the helmet. Ain't no decoration for the sons of the XIII. Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/290/#findComment-5175062 Share on other sites More sharing options...
treadhead Posted October 17, 2018 Share Posted October 17, 2018 TITHI Finally finished the ammo / fuel hoses for the rotor cannons and vulkite culverins in my XIIIth legion army (without breaking any of them ) also did the gold trim and eye lenses on some more of the veteran tactical squads, finished the smurf(tastic) lieutenant from conquest and the last of my eight allarus terminators paint jobs, I just need to do the bases now  Vykes 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/290/#findComment-5175157 Share on other sites More sharing options...
BitsHammer Posted October 17, 2018 Share Posted October 17, 2018 I did a test model for a allied solar auxilia force  fluff wise his cohort (the 205th) is from Mercury, thus the moniker "the children of Hermes"  I'll be honest, ever since FW released those models I knew that if I ever get around to building a Scions based army those guys will be the core of it. And nice job so far! The colors are looking pretty good! Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/290/#findComment-5175178 Share on other sites More sharing options...
Gederas Posted October 17, 2018 Share Posted October 17, 2018 (edited) TITHI started work on one of my Mek's recovery vehicles for my Speed Freeks:    The Grot crane operator makes me far too happy  This is also reminding me I need to make the thread in the Orks forum.... But I think that'll wait until I actually get some vehicles lol Edited October 17, 2018 by Gederas Doghouse, Montford and BitsHammer 3 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/290/#findComment-5175209 Share on other sites More sharing options...
ShibeKing Posted October 18, 2018 Share Posted October 18, 2018 (edited) Bought Wake the Dead and I am in the process of assembling the minis. I still only prime my miniatures because I can't think of a scheme I'd be happy to stick with and I prefer seeing everything in solid black for now. Edited October 18, 2018 by ShibeKing Vykes 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/290/#findComment-5176303 Share on other sites More sharing options...
BitsHammer Posted October 19, 2018 Share Posted October 19, 2018 TITH I stocked up on some GW spray primers (white and gray), build 8 Purestrain Genestealers, built 10 Guardsmen with the GSC upgrade sprue (the kit that comes with the Chimera) and shaved off around 20 aquilas off the models (I still need to figure out how to shave off the ones on the Chimera side panels with the least amount of damage), and picked up a GSC Leman Russ as well. Basically I was a dirty heretic and I regret nothing. Now I'm about to head home to get some painting done. deathspectersgt7 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/290/#findComment-5176448 Share on other sites More sharing options...
Gederas Posted October 19, 2018 Share Posted October 19, 2018 I still need to figure out how to shave off the ones on the Chimera side panels with the least amount of damage  Dremel and 220 grit sandpaper.  The Dremel for the big area, then the sandpaper for smoothing out. Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/290/#findComment-5176457 Share on other sites More sharing options...
BitsHammer Posted October 19, 2018 Share Posted October 19, 2018 (edited)  I still need to figure out how to shave off the ones on the Chimera side panels with the least amount of damage  Dremel and 220 grit sandpaper.  The Dremel for the big area, then the sandpaper for smoothing out.  That requires spending money on something that isn't models, rent (which gives me a place to keep thee models) or food (which gives me energy to paint and build said models).  Actually I was considering taking a hobby knife and carving rents through the icons like someone took some rending claws to them. Edited October 19, 2018 by Fulkes Vykes 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/290/#findComment-5176749 Share on other sites More sharing options...
thewarriorhunter Posted October 19, 2018 Share Posted October 19, 2018 TITH I sealed my Kill Team squad up. Two are completed and the others now have a protective coat over the base layer so I can paint them without damaging the edges with my fingers. Â I also started painting a drop pod to see if I like my Kill Team scheme on a larger model. Vykes 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/290/#findComment-5176776 Share on other sites More sharing options...
Axineton Posted October 20, 2018 Share Posted October 20, 2018 TITH I primed 2 razorwings and the new lieutenant and that’s about it today. Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/290/#findComment-5177105 Share on other sites More sharing options...
Gederas Posted October 21, 2018 Share Posted October 21, 2018 TITHI got my second and third limited edition models from a Warhammer store. Also, a cool pin. Â Will likely use the ghosty as a Pathfinder miniature, and the Lieutenant is definitely going to be a Sergeant for the Deathwatch. Montford, Axineton, Viridia and 1 other 4 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/290/#findComment-5177253 Share on other sites More sharing options...
Chaeron Posted October 22, 2018 Share Posted October 22, 2018 The last few days in the hobby, I've been working on some AT bases, and managed to get a hold of the new Primaris Lieutenant Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/290/#findComment-5177816 Share on other sites More sharing options...
thewarriorhunter Posted October 22, 2018 Share Posted October 22, 2018 TITH I got some more work done on my drop pod. I'm regretting starting this model... Â Vykes and BitsHammer 2 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/290/#findComment-5177944 Share on other sites More sharing options...
Magos Takatus Posted October 22, 2018 Share Posted October 22, 2018 What's so bad about drop pods? I've never tackled one myself, so I'm curious. It's looking neat so far. Â TiTHI undercoated a Stardrake as a change of pace from my 40k forces. It is a gift from a friend and I'm looking forward to having a go at something different. I am waiting for the decals for my Imperial Knight so that's a project I'm looking forward to finishing. Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/290/#findComment-5177977 Share on other sites More sharing options...
Gederas Posted October 22, 2018 Share Posted October 22, 2018 TITHI learned my phone's camera doesn't like focusing on Marine faces when they're not attached to a marine :lol: Â Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/290/#findComment-5177994 Share on other sites More sharing options...
NiceGuyAdi Posted October 22, 2018 Share Posted October 22, 2018 Not sure what your phone is, but you could be offering that up too close to the phone’s camera lens. All lenses have a minimum focus distance, within which you’ll never get a sharp shot.  If so, take the photo from further away and crop the image to get back to this size. Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/290/#findComment-5178158 Share on other sites More sharing options...
Vykes Posted October 22, 2018 Share Posted October 22, 2018 TheWarriorHunter, dude... yeah I get ya. Ugh, those models. I'd say "at least it's not a dreadclaw." I ended up getting unintentionally high off the glue getting that thing together and it is just the worst.... Drop pods. -sighs-  well, Today in the Hobby I put down the primer on 2 Eagles, a Mastadon, Rhino, and 20-some marines only to be juuuust finishing up the last eagle and a neighbor came over to use the compressor while I was (Dual hose) and jacked it up to 80 psi while I was working... Tomorrow in the Hobby, fishing an Eagle out of a vat of alcohol. Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/290/#findComment-5178176 Share on other sites More sharing options...
thewarriorhunter Posted October 22, 2018 Share Posted October 22, 2018 What's so bad about drop pods? I've never tackled one myself, so I'm curious. It's looking neat so far. Â Â Just a lot of little nooks and crannies to paint, that can't be done until a different color base layer is down, which then has to be cleaned up. Now multiply that by five since there's that many doors/fins and I still have the interior. Â It will be great when it's done and I fully accept that I did this to myself. It would have been a lot easier to paint this for my Raven Guard.\ Vykes 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/290/#findComment-5178181 Share on other sites More sharing options...
Gederas Posted October 23, 2018 Share Posted October 23, 2018 (edited) Not sure what your phone is, but you could be offering that up too close to the phone’s camera lens. All lenses have a minimum focus distance, within which you’ll never get a sharp shot.  If so, take the photo from further away and crop the image to get back to this size. Yeah, figured out the issue. I was indeed getting too close.  That being said, TITHI finished Brother Lektor:  And with Brother-Sergeant Antoni: Edited October 23, 2018 by Gederas Vykes and BitsHammer 2 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/290/#findComment-5178228 Share on other sites More sharing options...
Hfran Morkai Posted October 23, 2018 Share Posted October 23, 2018 I got my hands on a SW brass etch sheet. Which means I can continue marking my Legion Vexilla the same way I've done the first two. Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/290/#findComment-5178346 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now