Axineton Posted January 12, 2019 Share Posted January 12, 2019 TITH I did a little more to my assault jump pack squad for Grotsmasha’s January challenge and also built one of the containers from conquest magazine. I’ve also primed it black with stynylrez black primer then airbrushed it in a steel legion drab basecoat following the tale of painters blog instructions. Tomorrow I’ll finish it up if I get a chance and post pics on the forum. Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/305/#findComment-5233631 Share on other sites More sharing options...
RobWrath Posted January 12, 2019 Share Posted January 12, 2019 TITHI recieved my not-thunderfire cannon from Kromlech! I inboxed it and marveled at it, then had to put it away because I can’t work on it at all this weekend. I am happy that it came, but sad I have to wait. Oh well. I’m looking forward to deploying some cheap artillery. I was looking at their stuff today. Which model are you using? Also TITH I Finished up a Reiver Sgt for my kill team. Need his base and he's ready to deploy. I think that guy looks boss. Tough colours and I think you've pulled it off. I've been painting over a white undercoat for the first time in ages, and it looks terrible! Had a session putting some washes on tonight and it's perhaps starting to come together. Painting over black seems so much easier! Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/305/#findComment-5233672 Share on other sites More sharing options...
Daimyo-Phaeron Lenoch Posted January 12, 2019 Share Posted January 12, 2019 TITHI recieved my not-thunderfire cannon from Kromlech! I inboxed it and marveled at it, then had to put it away because I can’t work on it at all this weekend. I am happy that it came, but sad I have to wait. Oh well. I’m looking forward to deploying some cheap artillery. I was looking at their stuff today. Which model are you using? On mobile, so I can’t post images. https://bitsofwar.com/home/606-legionary-heavy-weapon-platform-storm-cannon.html Using the linked product. It’s a little smaller than I thought it would be, but given that my only techmarine model is an old metal one it’ll scale just fine, I think. Looks very good, and while I’ll have to wait a bit to make a recommendation either way so far I think it’s a good product. Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/305/#findComment-5233680 Share on other sites More sharing options...
Panzer Posted January 12, 2019 Share Posted January 12, 2019 TITHI recieved my not-thunderfire cannon from Kromlech! I inboxed it and marveled at it, then had to put it away because I can’t work on it at all this weekend. I am happy that it came, but sad I have to wait. Oh well. I’m looking forward to deploying some cheap artillery. I was looking at their stuff today. Which model are you using? Also TITH I Finished up a Reiver Sgt for my kill team. Need his base and he's ready to deploy. I think that guy looks boss. Tough colours and I think you've pulled it off. I've been painting over a white undercoat for the first time in ages, and it looks terrible! Had a session putting some washes on tonight and it's perhaps starting to come together. Painting over black seems so much easier! Honestly it depends on the colour you want to paint over white primer and paintig white is always a pain. It helps if you do white by layering bright grey tones like celestial grey. Just don't prime in grey. It looks like unpainted plastic and makes it hard to judge whether you primed properly or not. RobWrath 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/305/#findComment-5233686 Share on other sites More sharing options...
Chaeron Posted January 12, 2019 Share Posted January 12, 2019 TITH, my new BrokenToad Brushes have arrived - so I'm now restocked for the foreseeable future! Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/305/#findComment-5233707 Share on other sites More sharing options...
thewarriorhunter Posted January 12, 2019 Share Posted January 12, 2019 Thanks, I'd love to see some pictures of it next to a marine for scale. I've ordered several times from Kromlech and like their stuff. I've been toying with the idea of adding a TC to my army and converting a Primaris Tech Marine. Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/305/#findComment-5233743 Share on other sites More sharing options...
Bryan Blaire Posted January 13, 2019 Share Posted January 13, 2019 TITHI attempted to make a 25mm Sector Mechanicus base - really wish they just came this way or that GW would start making them, because right now I'm hoping that this doesn't keep looking as :cuss as it does now... Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/305/#findComment-5233830 Share on other sites More sharing options...
Kinstryfe Posted January 13, 2019 Share Posted January 13, 2019 TITHI attempted to make a 25mm Sector Mechanicus base - really wish they just came this way or that GW would start making them, because right now I'm hoping that this doesn't keep looking as :cuss as it does now... I use the 25mm Necromunda bases for that purpose. They match well enough for my tastes to mix and match as needed. Bryan Blaire and Gederas 2 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/305/#findComment-5233846 Share on other sites More sharing options...
Panzer Posted January 13, 2019 Share Posted January 13, 2019 YITHI started painting my Redemptor Dreadnought. I'm confident I'll finish it later today minus the base because I have yet to order a dreadnought sized base of the ones I'm using for the rest of the army (and painting it would probably take as long as painting the dreadnought itself lol). Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/305/#findComment-5233849 Share on other sites More sharing options...
Bryan Blaire Posted January 13, 2019 Share Posted January 13, 2019 I use the 25mm Necromunda bases for that purpose. They match well enough for my tastes to mix and match as needed.Unfortunately, at least on the US site, the no longer appear to be 25mm Necromunda bases. I'm going to take a trip up to a couple of FLGSs and see if they happen to still have the ability to get them in stock. Good call on the suggestion, hopefully they are still around! Kinstryfe 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/305/#findComment-5234000 Share on other sites More sharing options...
thewarriorhunter Posted January 13, 2019 Share Posted January 13, 2019 TITH I made another batch of my 'hobby cookies'. These are bases for a 5 man tactical squad, the rest of my kill team, and five more for whatever unit I decide to complete after that. I'll clean up the edges and make them pretty after the glue sets. Vykes 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/305/#findComment-5234006 Share on other sites More sharing options...
Panzer Posted January 13, 2019 Share Posted January 13, 2019 TITHI finished painting my Redemptor Dreadnought for my Knights of Baal (minus the base still) Also bonus messy desk. Bryan Blaire, Axineton and Vykes 3 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/305/#findComment-5234131 Share on other sites More sharing options...
Chaeron Posted January 15, 2019 Share Posted January 15, 2019 TITH, some model masking tape arrived - perfect for Titans! Kinstryfe 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/305/#findComment-5235726 Share on other sites More sharing options...
Vykes Posted January 15, 2019 Share Posted January 15, 2019 Today in the Hobby, I finally committed to the Loyalty and Treachery cause, and I got my shapeways orders in for pauldron emblems and chain axes! Just letting 'em soak in soapy water with a bunch of mk. IV plate and I'll be good to start some building after I turn 30 in a few days. And I may have done more work on some Escher 'militia/cultists'. Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/305/#findComment-5235732 Share on other sites More sharing options...
Bryan Blaire Posted January 16, 2019 Share Posted January 16, 2019 So managed to get my base "finished" creation-wise! http://www.bolterandchainsword.com/topic/350346-farsight-enclaves-tau-kill-team-started/?p=5235816 Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/305/#findComment-5235819 Share on other sites More sharing options...
thewarriorhunter Posted January 16, 2019 Share Posted January 16, 2019 TITH I played my first game in months. It was close and I had a great time. Working on a narrative bat-rep for it right now. Here's what I fielded, 650 points, 100% painted. Atrus, Chaeron and Vykes 3 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/305/#findComment-5235864 Share on other sites More sharing options...
Atrus Posted January 16, 2019 Share Posted January 16, 2019 TITH i repaired/reassembled my Penitent Engines for the umpteenmillionth time. Theyre more glue than machine now. Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/305/#findComment-5235920 Share on other sites More sharing options...
treadhead Posted January 16, 2019 Share Posted January 16, 2019 TITH i repaired/reassembled my Penitent Engines for the umpteenmillionth time. Theyre more glue than machine now. Magos "Don't worry humble penitent we can repair you, we have the archeotech, servitor alpha 17d bring forth the holy Loctite" TITHI Did some more work on primarneus and the victrix guard, dabbled with a all imperial knight 2k list and finished penciling in all the points updates from chapter approved into their codices Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/305/#findComment-5235923 Share on other sites More sharing options...
Slasher956 Posted January 17, 2019 Share Posted January 17, 2019 TITH i repaired/reassembled my Penitent Engines for the umpteenmillionth time. Theyre more glue than machine now. & people wonder why I dont have any.... and why i've not increased my arcoflagents even though they are defiantly my MVPs Vykes 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/305/#findComment-5236601 Share on other sites More sharing options...
thewarriorhunter Posted January 18, 2019 Share Posted January 18, 2019 TITH I finished the first section of my narrative bat-rep. If you want to read and give your thoughts you can check it out here: http://www.bolterandchainsword.com/topic/339466-deployment-of-the-spectral-sicarii-homebrew-rg/?p=5237057 Vykes 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/305/#findComment-5237058 Share on other sites More sharing options...
Reldn Posted January 18, 2019 Share Posted January 18, 2019 Today in the hobby, I have been seriously contemplating getting into Adeptus Titanicus. Ordered a copy of the rules and am currently eyeballing a Reaver Titan. Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/305/#findComment-5237381 Share on other sites More sharing options...
Chaeron Posted January 19, 2019 Share Posted January 19, 2019 Today in the hobby, I have been seriously contemplating getting into Adeptus Titanicus. Ordered a copy of the rules and am currently eyeballing a Reaver Titan. Exciting! The sub-forum is really active, so will look forward to seeing your journey :tu: TITH, I myself have pre-ordered Titanicus goodness! Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/305/#findComment-5237630 Share on other sites More sharing options...
Mendi Warrior Posted January 19, 2019 Share Posted January 19, 2019 TITH, I also pre-ordered AT Titandeath goodies and replenished various supplies. I also drilled some bolters and bolt pistols for some Chaos Space Marines (52 of them so far) Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/305/#findComment-5237709 Share on other sites More sharing options...
Kriegsmacht Posted January 19, 2019 Share Posted January 19, 2019 Recently in the hobby I got in the start of a Heresy army. Got in the mail: Iron Father Medusa Immortals Iron Hands helmets Volkite Chargers Also picked up a box of Mark III marines at the hobby store Vykes 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/305/#findComment-5237752 Share on other sites More sharing options...
Axineton Posted January 19, 2019 Share Posted January 19, 2019 TITH I popped into my local warhammer store, brought some skrag brown and a large drybrush. Got talking to the staff and turns out four people won from that store the warhammer ultimate experience so there should be a little south coast posse going up to Nottingham in two weeks. On another note it’s exactly a year today I got back into the hobby and registered on the b&c. Vykes 1 Back to top Link to comment https://bolterandchainsword.com/topic/274679-today-in-the-hobby-i/page/305/#findComment-5237764 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now